StornowaySA
Member Since: 23 Sep 2007
Location: Adelaide
Posts: 406
  
|
| General Grabber At2 - what tyres pressures? |
|
Alll, what tyre pressures should I run in my new At2's? Both normal, sole driver; and then off road with camper trailer and 4 people.....if thats not asking too much....  (psi please)  MY2010 D4 HSE 3.0, e-diff, 19inch MTR's; LLAMS Height adjustor, LR f & r light guards, LR side steps, LR bright finish side door mouldings; LR/Mantec G4 front bash plate, LR G4 Winch kit, Warn 9500lb Winch; GOE compressor guard, Uniden UHF, LR bright finish roof rails, LR G4 driving light kit, LR G4 ladder, 4 x extra rear compartment 12V sockets, Traxide dual battery system and Optima Yellowtop battery, ORS drawer system / fridge slide, LED rear compartment lighting.
|
 24th Jun 2008 4:50 am |
|
|
Donald
Member Since: 15 May 2007
Location: Inverness
Posts: 188
  
|
I run mine at 33 psi front, 36 psi rear for general driving and most towing. For really heavy loads - digger on plant trailer etc I go to 42 psi on the back. Off road with 4 up and a camper I would probably stick with the 33/36 set up. Chipped, K&N, tow pack, AT2's, Mantec, fridge in boot, invertor, Garmin, laptop/Memory Map, Optima yellow top, Traxide Kit, Phillips Extreme bulbs
|
| 27th Jun 2008 7:38 pm |
|
|
