Member Since: 25 Jun 2008
Location: hampshire
Posts: 6
connecting my satnav/handsfree
Hi
I have a disco 3 gs model and want to connect my tomtom satnav so it goes through the stereo. does anyone know how to do it ? i have the cable that came with tomtom that connects into the aux but cant find an aux socket.
thanks oli
25th Jun 2008 6:28 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
Welcome
If you have an aux socket it will be at the back of the center consul ( middle row of seats )
There is a little black flap that lifts up to reaveal the aux socket and a 12 v ciggy plug
Not sure if your spec has the aux socket as they keep changing the spec.
If your unlucky and dont have a aux socket , there is a couple of ways around it if your handy with a screwdriver G4 Gone ...but not forgotten
25th Jun 2008 6:37 pm
121oli
Member Since: 25 Jun 2008
Location: hampshire
Posts: 6
no unfortunatly i have checked for sockets , i have taken the whole stereo out to see if there was a socket in the back but no joy. if you can help be much appreciated
25th Jun 2008 7:18 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
Have you got the base model stereo or the hi-line ?
Hi - line one
Click image to enlarge
G4 Gone ...but not forgotten
25th Jun 2008 7:21 pm
121oli
Member Since: 25 Jun 2008
Location: hampshire
Posts: 6
hi
i have the base model
25th Jun 2008 8:25 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
You will need to remove the stereo and connect into the wires .There is a lot of confusion as to were the wires end up on the base model.On the hi-line one they go to the passenger footwell and then on to the aux socket in the back
Click image to enlarge
You need to connect ..
RED - RIGHT CHANNEL
BLUE - LEFT CHANNEL
BLACK - GROUND (FOR BOTH ) -the thicker one of the 2
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum