Member Since: 02 Feb 2008
Location: surrey
Posts: 2752
CB Aerial Info..
Chaps...looking at getting a CB set up, can anyone advise an Aerial/Mount thats pleasing on the eye.. not a big floopy monstrocity....ND recons he already has one of those in his trouser
Before anyone comments i do have a preference for black
Planning of mounting on a front runner rack, however other suggestions welcome
Pics also welcome"you cannot teach stupid people to do clever things"
--------------------------------------------------------
05 plate D3 HSE in Zermat- Gone
11 Plate D4 Landmark in Fuji white- Gone
08 Plate D3 Hse in Buckingham Blue- Gone
58 plate D3 HSE Silver- Gone
10 Plate D4 HSE Stornaway Grey
I make a mount for the front runner Home of RLD Hidden winch mounts Spare wheel Locks Trailer Body Fabrication ray@rld-tech.co.uk D3/4 sump plates MY 14 sump plates and the Discovery Sport wheel protectors Discovery 5 wheel locks
more Helsport tents and other things for camping Law of Mechanical Repair:
"After your hands are coated with grease, your nose will begin to itch and you'll have to pee!"
28th May 2008 5:48 pm
discocuzzy
Member Since: 02 Feb 2008
Location: surrey
Posts: 2752
Is there anything you dont make!!
Got any at the moment Ray?"you cannot teach stupid people to do clever things"
--------------------------------------------------------
05 plate D3 HSE in Zermat- Gone
11 Plate D4 Landmark in Fuji white- Gone
08 Plate D3 Hse in Buckingham Blue- Gone
58 plate D3 HSE Silver- Gone
10 Plate D4 HSE Stornaway Grey
Will do photo tomorrow the if you like will do you one 8)Home of RLD Hidden winch mounts Spare wheel Locks Trailer Body Fabrication ray@rld-tech.co.uk D3/4 sump plates MY 14 sump plates and the Discovery Sport wheel protectors Discovery 5 wheel locks
more Helsport tents and other things for camping Law of Mechanical Repair:
"After your hands are coated with grease, your nose will begin to itch and you'll have to pee!"
o lots o money Home of RLD Hidden winch mounts Spare wheel Locks Trailer Body Fabrication ray@rld-tech.co.uk D3/4 sump plates MY 14 sump plates and the Discovery Sport wheel protectors Discovery 5 wheel locks
more Helsport tents and other things for camping Law of Mechanical Repair:
"After your hands are coated with grease, your nose will begin to itch and you'll have to pee!"
28th May 2008 6:32 pm
DiscoDunc
Member Since: 08 May 2006
Location: Bristol
Posts: 16390
I'll have one as well RLD if youve got spare. Mine is currently fitted the underneath of the rack by means of a steel bar but the range is very poor and reads nearly 5 on the SWR Duncan
-----------------------------------------------------
If I'd known I was going to be so thirsty this morning I'd have drunk more beer last night.
FFRR Autobiography 4.4 SDV8 MY17
D4 HSE MY13 SOLD
FFRR 3.6 Vogue TDV8 SOLD
D4 HSE MY10 SOLD
D4 SE TECH MY15 SOLD
D4 XS MY12 SOLD
D4 HSE MY10 SOLD
D3 HSE MY06 - Re-Cycled Worldwide
This is the mount i just slid it in to show you have not tightened it upHome of RLD Hidden winch mounts Spare wheel Locks Trailer Body Fabrication ray@rld-tech.co.uk D3/4 sump plates MY 14 sump plates and the Discovery Sport wheel protectors Discovery 5 wheel locks
more Helsport tents and other things for camping Law of Mechanical Repair:
"After your hands are coated with grease, your nose will begin to itch and you'll have to pee!"
29th May 2008 5:50 pm
discocuzzy
Member Since: 02 Feb 2008
Location: surrey
Posts: 2752
Any made at the moment Ray "you cannot teach stupid people to do clever things"
--------------------------------------------------------
05 plate D3 HSE in Zermat- Gone
11 Plate D4 Landmark in Fuji white- Gone
08 Plate D3 Hse in Buckingham Blue- Gone
58 plate D3 HSE Silver- Gone
10 Plate D4 HSE Stornaway Grey
No but can get on it let you know.Home of RLD Hidden winch mounts Spare wheel Locks Trailer Body Fabrication ray@rld-tech.co.uk D3/4 sump plates MY 14 sump plates and the Discovery Sport wheel protectors Discovery 5 wheel locks
more Helsport tents and other things for camping Law of Mechanical Repair:
"After your hands are coated with grease, your nose will begin to itch and you'll have to pee!"
29th May 2008 5:56 pm
xtc
Member Since: 27 Mar 2007
Location: Hampshire
Posts: 1072
As an addition to Ray's mounts, if the LR rails are being used, not the FR ones then the cable can be run through the rear plastic moulding to keep the cable tidy. The moulding is removed with one screw and a 6mm hole drilled. Will never show when you sell it on! The CB aerial bases will not fit in the track as the VHF ones do in pic's below, to big.... Shame.
Click image to enlarge
Click image to enlarge
Another good CB aerial is the K40. Has the advantages of no big spring at the bottom, and also is easy to remove the whole of the base and whip with a 1/2 turn. No tools. It's also very easy to tune!!
Member Since: 02 Feb 2008
Location: surrey
Posts: 2752
XTC...thats looks very neat mate..im am actually thinking now about mounting the aerial to the rails as i probably wont have the rack on all the time.
What bracket have you used there..home made or specific?"you cannot teach stupid people to do clever things"
--------------------------------------------------------
05 plate D3 HSE in Zermat- Gone
11 Plate D4 Landmark in Fuji white- Gone
08 Plate D3 Hse in Buckingham Blue- Gone
58 plate D3 HSE Silver- Gone
10 Plate D4 HSE Stornaway Grey
29th May 2008 7:26 pm
xtc
Member Since: 27 Mar 2007
Location: Hampshire
Posts: 1072
Hi,
Bracket home made, just some 3mm ali plate. Not as clever as Ray's as I have no bending facilities so just a spacer to get the mount in under the bracket. Track fixing is 6mm thick ali tapped 6mm.
Only problem is that the Explorer rack cannot be fitted with the mount as the rack covers the full length of the track. Fine with the FR though. I leave my rack on all the time so just use a simple 90 deg bracket on the top rail of the rack where the tiedown rings slot in.
Cheers, Richard.Off Roading is OK.... But I'd rather be Boating!
xtc nice one my one dose not need to be bent have don some flat ones to, yours nice oneHome of RLD Hidden winch mounts Spare wheel Locks Trailer Body Fabrication ray@rld-tech.co.uk D3/4 sump plates MY 14 sump plates and the Discovery Sport wheel protectors Discovery 5 wheel locks
more Helsport tents and other things for camping Law of Mechanical Repair:
"After your hands are coated with grease, your nose will begin to itch and you'll have to pee!"
29th May 2008 8:28 pm
Andycapper
Member Since: 09 Sep 2007
Location: Melbourne
Posts: 70
Hi folks, looking at the various brackets I wondered if anyone has tried a magnetic mount (as shown in XTC's Nevada link) - do they work on a Disco roof (it is steel) or do they tend to be too easy to move or get knocked off??
Have been contemplating the same problem - and I do not currently have any roof rails.
Comments/suggestions...?
AndyHave my new year Disco..! Atacama Sand, active diff, active headlights, hi-ice, cooler, sliding loadspace floor, window tint, MP3, Mantec plate, roof rails, mud
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Law of Mechanical Repair:
