Member Since: 03 Jan 2008
Location: Near Reading
Posts: 1214
If your left hand compartment is like mine, then probably not as there is extra wiring and in an HSE their are compressor bits and pipework for 3rd row aircon.
FYI its a bit of a wiggle as well to get the foam and jack in.
Also, if you happen to drive over a wheel chock and mangle it so it no longer folds, Nick can do replacements at a reasonable price
17th Oct 2008 2:19 pm
BORDER ROVER
Member Since: 03 Dec 2007
Location: Cumbria
Posts: 1105
Tanters, here is a photo of my right hand side storage area with the jack foam in there. Have an HSE with detachable tow bar so thats in the left but looking at it, it won't fit as there is no alcove for it to sit in.[/img]POT NOODLE NAVIGATION CHALLENGE 2010 WINNER
Club Sankey
Club pie and peas
17th Oct 2008 2:25 pm
BORDER ROVER
Member Since: 03 Dec 2007
Location: Cumbria
Posts: 1105
Here is another one from a different angle. Hope it helps S.POT NOODLE NAVIGATION CHALLENGE 2010 WINNER
Club Sankey
Club pie and peas
17th Oct 2008 2:27 pm
tanters
Member Since: 24 Oct 2007
Location: Oireland
Posts: 4287
Thanks lads
M, I can see now from your photo that I didn't have it down far enough. Will tackle it again after work. I dont have the rubber strap but could probably make one with a swiss army knife and some pantyhose
P.s. that must be one hairy dog you have A happy childhood ... is the worst possible preparation for life.
17th Oct 2008 2:39 pm
BORDER ROVER
Member Since: 03 Dec 2007
Location: Cumbria
Posts: 1105
Ohh yeah this is Wilson my Long Haired German Shepherd. POT NOODLE NAVIGATION CHALLENGE 2010 WINNER
Club Sankey
Club pie and peas
17th Oct 2008 2:46 pm
andychelt
Member Since: 24 Mar 2008
Location: Cheltenham
Posts: 344
Do the tools also go in with the jack?
When I got my disco it only came with Jack and Locking wheel nut adaptor, nothing else. Any ideas where they go too and what i'm missing?
17th Oct 2008 3:24 pm
tanters
Member Since: 24 Oct 2007
Location: Oireland
Posts: 4287
Sweet Jeepers A happy childhood ... is the worst possible preparation for life.
17th Oct 2008 3:35 pm
RR38HANS
Member Since: 22 Jul 2008
Location: BRUGES
Posts: 179
Don't 5 seaters have a bottle jack and 7 seaters scissor jack?05 TDV6 HSE AUTO 7seats, tonga green/alpaca, alpine roof, privacy glass, tow kit, wood kit, 20" stormers n summer, 18" in winter, fancy exhausts, rear seat ent., club fooked turbo!
RANGE ROVER 1995 SOFTDASH (sold)
RANGE ROVER 1997 P38 (sold)
TRIUMPH TR6 OD
LOTUS EXCEL SE
AUDI A2 TDI
17th Oct 2008 3:44 pm
tanters
Member Since: 24 Oct 2007
Location: Oireland
Posts: 4287
I have the commercial version which is the 5 seat version modified/ bastardised and I have a scissor jack
strange eh!A happy childhood ... is the worst possible preparation for life.
17th Oct 2008 3:57 pm
countrywide
Member Since: 16 Sep 2007
Location: UK
Posts: 6019
BORDER ROVER wrote:
Ohh yeah this is Wilson my Long Haired German Shepherd.
I bet you don't have a house alarm
He looks quite large
17th Oct 2008 3:58 pm
BORDER ROVER
Member Since: 03 Dec 2007
Location: Cumbria
Posts: 1105
Hope this helps with where the tool roll goes. I presume its the right place as its where i found it.
Yeah Wilson is quite a big lad and he is only 17 months old . Your right no alarm needed and my 16 year old daughters boyfriend doesn't get passed the front door either
But he's not the one to worry about its the Terrier that we have. POT NOODLE NAVIGATION CHALLENGE 2010 WINNER
Club Sankey
Club pie and peas
17th Oct 2008 4:43 pm
crews control
Member Since: 18 Mar 2007
Location: Dorset
Posts: 5011
Bodsy wrote:
it'll never fit, moulding needs to be reversed (LH to RH )
You'll need to get one from Nick or from a breakers
That's a joke right? 2005 D3 HSE 2011 D4 Landmark 2016 D4 HSE Lux
2017 Ford Tourneo VR46
Club Waitomo
17th Oct 2008 5:22 pm
andychelt
Member Since: 24 Mar 2008
Location: Cheltenham
Posts: 344
thanks for the pic of the tool roll border rover, i can see what i'm looking for now!
I got the jack in there as per photo but no tools. Might have another look tomorrow in case its stashed any where silly, i checked under the bonnet already (used to be there on the freelander, to keep hands toasty i guess for changing tyres on those cold nights!!!!)
Resurrecting this thread with a similar question. For the life of me I can't put the jack back in it's place. As the OP, mine is a 7-seater so it goes on the driver's (right) side. It has the foam insert. I just can't put it back, it seems physically impossible to squeeze it in.
So far I see the hook thingy goes at the top and I'm assuming the flat bit (which goes on the ground) goes inside the foam mould? I tried bottom first, top first, opening it a bit, completely closed.
I know it's a bit of a ridiculous ask, but would someone spare 5 minutes and share a video of how to do it?
Just to pop my head above the wall
Yes, I have the foam insert and the bag containing the foldable chocks, wheel brace and screwdriver.
It is a struggle to fasten the rubber bands and everything must be placed right otherwise the cover will not close. Even though I have the scissor jack, it's dangerous and can collapse- mine did when I came to use it. I bought a LR bottle jack which I keep in the spare battery compartment (Where the brake master cylinder is) and the handles for that on the floor behind the first row of rear seats. If you look on the forum, many have bought Bottle jacks for safety reasons.
The rubber "Bands" are cheap enough from the Stealers an my spare jack is held in place with them.Relocated to Mid France from N. Wales March 2021
Another Gizmo..GAP BT. Let's see how it compares with JLR IDD/SSD v.163
Rovacomlite and IDD/ SSD diagnostics user
Previous Landies
3.9 SE Classic
3.5 V8 Disco
4.6 P38 HSE
L322 Vogue HSE
TD4 ES Freelander 1
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
)
