Member Since: 19 May 2009
Location: essex
Posts: 19
`taping` xenons for europe travel
i know the xenon adjustment for europe is much discussed here in the past,,,, but i cant face taking the lights/grille off and on for my two upcoming french trips, nor do i wish to give LR dealer 4 X £whatever
can anyone tell me if a bit of black tape like the old days will A) help a bit B) keep le flic happy C)melt horribly to the plastic lens ?
cheersTDV6 HSE 2008.....as kindly specced right up by LR as demo ! fridge....yeh why not ?
22nd May 2009 10:37 pm
GLYNNE
Member Since: 06 Oct 2006
Location: KENT
Posts: 4695
I can categorically say don't bother to adjust. Ive traveled many times and never bothered and never been flashed.
22nd May 2009 10:56 pm
MacLeod 313
Member Since: 18 Apr 2008
Location: away
Posts: 10723
me too, leave as they are, although technically naughty, you'll be fine. Just carry a roll of electrical tape just in case.
22nd May 2009 11:05 pm
SN
Member Since: 03 Jan 2006
Location: Romiley
Posts: 13710
10 minute job to flick grill off, draw headlamp sliders up and pop lamps out Steve N | 21MY Defender | 08MY Discovery 3 (history) | 06MY Discovery 3 (ancient history)
22nd May 2009 11:57 pm
the kergan
Member Since: 01 Dec 2008
Location: Swindon Wiltshire
Posts: 535
Came back from a trip to the battlfields and eurodisney last week and drove a lot of miles, some in Paris. Never adjusted the lights or anything and had no problems.
However I did have a pack of the stick on beam converters in the boot just in case I got stopped but no hassle at all.
(apart from some in a camper van over my side of the road that smashed the door mirror glass) I have something to say! It's better to burn out... than to fade away!
23rd May 2009 12:16 am
gilmore
Member Since: 16 Jan 2005
Location: On the sofa
Posts: 2185
GLYNNE wrote:
I can categorically say don't bother to adjust. Ive traveled many times and never bothered and never been flashed.
Same here. never so much as a flash
cheers
robAll opinions expressed in this posting are my own and are not necessarily those of someone who knows what they are talking about.
Land Rover Defender V8, 50th Anniversary Edition
Mercedes ML350CDI
HM Moto CRE300X
Honda CRF250X
1974 Honda CB750K4
1975 Honda CB750K5
Ford Transit Custom (for the bikes)
Did 3000 miles down to Spain and back, quite a lot of it done through the night, and never flashed. No adjustments done. You can always claim to plod that you have done it anyway - take a printout of the instructions to show you have done it TDV6 HSE Lux (2014MY)
TDV6 HSE (2006MY - owned for 9 years and 150,000! - now replaced)
Mini Cooper SD 5 door
TVR Chimaera 450
Series II 1960 Diesel
23rd May 2009 2:43 pm
davesimmons
Member Since: 11 Feb 2006
Location: Alberta
Posts: 733
me too, drove to Austria and never bothered adjusting them Welcome to the Global Warming Corner.
23rd May 2009 3:25 pm
PNF911
Member Since: 19 May 2009
Location: essex
Posts: 19
cheers all.... will take some tape !!TDV6 HSE 2008.....as kindly specced right up by LR as demo ! fridge....yeh why not ?
8th Jun 2009 1:16 pm
crwoody
Member Since: 09 Mar 2009
Location: Littleborough
Posts: 2109
Does tape over the outside even work with xenons anyway?
My understanding is that the beam shape is formed within or behind the inner lens, unlike halogens where the shape of the beam (in part at least) is formed by the internal shape/ribs at the outer lens?
I wouldn't if I were you. The projector design is such that tape will me approx. naff all difference, plus the adhesive may well damage the lense. Seriously, taking the grille off takes 30 seconds from pulling the bonnet release. Each headlamp takes another 30 seconds to remove and perhaps 60 seconds to remove the cover and flick the lever. 5 minutes will be ample to do both lamps and refit the grill
Unless you have an A-bar and driving lamps......
Anyway, back on track. Because the lever simply moves a blind across the lamp, you can switch it over in the UK without you risking blinding UK drivers - The NS of the beam pattern will simply be cut short. If you really want to be compliant, that's all it takes.
I've done dozens of trips across europe and haven't had any problems, despite only changing the lamps on one trip.I know it's not considered "kind" to say no these days, but no. Just no, ok? And if it's not ok, still no.
8th Jun 2009 1:28 pm
SPOTTER
Member Since: 06 Dec 2006
Location: Adrift........
Posts: 3095
How do you get your headlamps out in 30 seconds ND? Mine takes ages of bashing the clip to free it off end of an era ....... maybe a Defender when it appears.......
1) Always give the slides a damn good wipe before you put them back in - oil no good as it collects the dust that causes them to jam
2) If 1) doesn't work, a sharp tug with
Click image to enlarge
I know it's not considered "kind" to say no these days, but no. Just no, ok? And if it's not ok, still no.
8th Jun 2009 2:59 pm
SPOTTER
Member Since: 06 Dec 2006
Location: Adrift........
Posts: 3095
I do the same.....obviously don't have quite the right aggressive attitude, must try harder
oh, I don't bother changing them for France either and I am over there a lot!!!end of an era ....... maybe a Defender when it appears.......
8th Jun 2009 3:10 pm
cobblers
Member Since: 06 Dec 2008
Location: Chester
Posts: 175
I'm going to France next month, so had a look at the back of my Adaptive Xenons to see what was involved.
The lights were a bit tough to get out, but with some well aimed maintenance spay I got the vertical clips to move. I took the covers of the back of the bulbs as per other pictures posted on the site, but honestly couldn't work out what to do, I couldn't see any levers to move up or down on either unit.
I put them back on an resigned myself to the fact that I would leave them and claim I had done it already if stopped.
But if anyone has a good picture on where the lever is on the adaptive lights I'd be happy to have another go.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum