BournevilleBazza
Member Since: 17 Jun 2008
Location: Croston, Lancashire
Posts: 556
  
|
| Fitted MANTEC, VERY PLEASED - NOW NEED LADDER FITTING KIT... |
|
Evening All,
Fitted my recent purchase of the Mantec plate tonight, really chuffed with it.
Bought a 2nd hand ladder at the same time, just wondered if its possible to buy a fitting kit seperately?
Need the gasket, the foam for the top and the rivnuts and bolts.
Cheers  If you aren't living life on the edge, you're taking up too much space!!
2010 Discovery TDV6 HSE with a few bits and bobs on.
1986 V8 90 County
2012 Evoque TD4 (for the Mrs) and really VERY pleased!
Formerly BuckinghamBazza
|
 16th Jun 2009 10:35 pm |
|
|
CFB
Member Since: 02 Dec 2005
Location: Bradford, West Yorkshire
Posts: 6100
|
Doubt you can get the kit from LR but to be honest they are all easily substituted with other bits and pieces. Double sided tape easy enough to get hold of (number plate fixing pads should do the trick), bolts and rivnuts available from any decent BAPP or similar. Probably just a few pence too. 2020 BMW X1 18d XDrive X-Line Auto
|
| 17th Jun 2009 8:42 am |
|
|
