Wineman
Member Since: 25 Jan 2005
Location: UK/France
Posts: 103
  
|
OK, will have been the proud owner of my D3HSE for a week, tomorrow. My fist impressions are overwhelmingly positive! I can't get over how well this car drives. It is quiet, responsive, sturdy and comfortable. I love this car, as does my wife...we fight over who gets to drive! The kids love it as well, although my eldest daughter complained that it didn't bump up and down or sway like the old D2! Being 3 years old she thinks that D2 was more fun as it was like being on a roller coaster....Mum and Dad feel differently of course!
Now to the niggles. I understand that my car was built a month ago, so mid March ish. Upon getting it home I noticed two immediate problems:
1. Seat Memory: Only button 1 and 3 are working. I can not use button 2! I assume it was incorrectly installed at the factory. Will raise with the dealer, but frustrating that something so simple is over looked.
2. Upper Rear tail gate: I am having difficulty closing this upper half of the tail gate. I doesn't seem to latch completly and takes 2-3 times for it to finally close completely. I have to shut it with some force in order for it to latch properly. Has anyone else experienced this problem? Am I applying the correct level of force? Perhaps it will get easier with time? I am inclined to take it back to the dealer.
Any thoughts would be appreciated! 2017 Disco5 First Edition(On Order)
2013 Disco4 HSE Luxury
2012 Disco4 HSE
2005 Disco03 TDV6 HSE
2002 Disco02 TD5 ES
1987 Defender 90(MOD)
2002 Fendt 180 Tractor
1950 Massey Ferguson Tractor
|
 25th Apr 2005 9:49 am |
|
|
mwillems
Member Since: 06 Jan 2005
Location: Oakville, Ontario, Canada
Posts: 154
 
|
1. Little things like that are almosat inevitable - but wil be fixed quickly.
2. Yes, whenthe car is closed it takes a lot of force. When a door or window is open, it is much easier.
My LR3, last week:
http://www.mvw.net/gallery/displayimage.php?pos=-36
-Michael
|
| 25th Apr 2005 12:16 pm |
|
|
cmyers_uk
Member Since: 10 Apr 2005
Location: Near Bristol, UK
Posts: 433
 
|
Wineman,
Wife had that problem but it turned out that as she slammed it shut she was pressing the release. Make sure when you shut it you dont have your fingers near it. We havent had a problem since spotting this.
Regards
Chris
|
| 25th Apr 2005 3:23 pm |
|
|
Wineman
Member Since: 25 Jan 2005
Location: UK/France
Posts: 103
|
Thanks Guys!
Cmyers- Good point, although as it happens I ensured that are hands were well away from the release.
M-willems: Yes good advice, have just been out to the car and tried to shut the top tail gate while leaving one of the doors open. Made all the difference. All about the body of air inside the car and a relatively light top tail gate, I suppose. 2017 Disco5 First Edition(On Order)
2013 Disco4 HSE Luxury
2012 Disco4 HSE
2005 Disco03 TDV6 HSE
2002 Disco02 TD5 ES
1987 Defender 90(MOD)
2002 Fendt 180 Tractor
1950 Massey Ferguson Tractor
|
| 26th Apr 2005 6:56 am |
|
|
Gareth
Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26775
|
I think I saw a service bulletin about a difficult to close tailgate on the Land Rover GTR site. I could not look at the detail though, as my subscription has expired.
Goto Landrover.co.uk and look under owner info, the Global Tech Reference site link is there. You can browse service bulletins, but you can't open them unless you pay. I would not pay for this, just talk to your dealer. Mine shuts first time everytime, so yours needs adjusting.
|
| 26th Apr 2005 7:52 pm |
|
|
Wineman
Member Since: 25 Jan 2005
Location: UK/France
Posts: 103
|
Gareth, yours shuts everytime without needing a door or window open? 2017 Disco5 First Edition(On Order)
2013 Disco4 HSE Luxury
2012 Disco4 HSE
2005 Disco03 TDV6 HSE
2002 Disco02 TD5 ES
1987 Defender 90(MOD)
2002 Fendt 180 Tractor
1950 Massey Ferguson Tractor
|
| 27th Apr 2005 7:49 am |
|
|
Pelyma
Member Since: 06 Jan 2005
Location: Patching, Sussex
Posts: 15496
|
So does mine  DS3 TDV6 HSE - Silver with Alpaca (old one) Gone
DS3 TDV6 HSE- Silver with Alpaca (new one) Gone
D4 HSE Lux - Montalcino Red Gone
Porsche Cayenne V8 Diesel S
|
| 27th Apr 2005 9:51 am |
|
|
Dom Harvey
Lord of the Four Fingers
Member Since: 15 Apr 2005
Location: Dorset
Posts: 7458
|
And so does mine  2004 Discovery 3 - gone
2006 Discovery 3 - gone
2008 Discovery 3 GS - gone
2011 Freelander LE Special Edition - gone
2007 Discovery 3 XS - gone
2012 Discovery 4 GS - gone
2019 RangeRover Evoque 2.00 D150 R-Dynamic
|
| 27th Apr 2005 10:53 am |
|
|
Ecosse
Member Since: 07 Jan 2005
Location: Grampian, Scotland
Posts: 889
|
I think it is a balance of getting just enough pressure without "slamming", but I do rather like the "clunk" that the doors give when closed. Rear tailgate though is difficult & I can't work out where to grip it without getting all the road dirt over me! 
|
| 27th Apr 2005 10:53 am |
|
|
PCH
Member Since: 12 Jan 2005
Location: Anywhere but work
Posts: 812
 
|
I've had my D3 for 6 days now and my upper tailgate doesn't always shut first go. I need to reopen it a small way and then forcefully close it pushing the plastic cover where the number plate light is mounted.
My bonnet doesn't easily lock on both catches without really slamming it shut.
Chris 2011 Discovery 4 (MY12) SDV6 HSE with General Grabber AT's, Traxide Aux Battery system, custom rear drawers and Autosafe half height cargo barrier
Gone - 2005 Discovery 3 TDV6 HSE
ARB Bull Bar, Warn 9.5XP Winch, IPF D/Lights, Cooper STT's, LR Raised Air Intake, Traxide aux battery system, custom drawers and half height Autosafe cargo barrier, Mitchell Bros 4x4 tow hitch
|
| 27th Apr 2005 1:19 pm |
|
|
BN
Member Since: 18 Mar 2005
Location: Here
Posts: 6463
|
Maybe the rear tailgate could have done with some sort of handle on it, because it sure gets dirty and yes it does not always close first time. As for the bonnet, I just drop it because if I don't it does not latch on both locks, dodgy.
|
| 27th Apr 2005 2:49 pm |
|
|
Gareth
Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26775
|
Yes tailgate shuts ok almost everytime. I pull it down using the hand hold on the inside, and with a reasonably gentle throw as I let go, it shuts without slamming. My bonnet also needs a good slam, or the left hand catch does not catch properly.
The first I know about it is when the bonnet starts to lift in one corner on the motorway. I had the dealer try to adjust it, but it is only marginally better.
|
| 27th Apr 2005 8:50 pm |
|
|
freeflytim
Member Since: 18 Feb 2005
Location: Chattanooga, TN
Posts: 297
 
|
Never had a problem with the rear hatch, but I did also learn you gotta slam the hood pretty good to get the passenger side to latch.
You don't notice its not latched until driving...
The 'hood open' sensor is on the driver's side.
 Whoops, I forgot Im on the wrong side of the pond!!
The BONNET's right side sometimes does not latch and the sensor is on the left side.
-TIM
Tennessee USA
|
| 28th Apr 2005 2:06 am |
|
|
jzk
Member Since: 15 Mar 2005
Location: Chicago
Posts: 99
|
When I was in Orlando with the truck, I got a suspension fault that would no go away with a restart. So, I checked the fuses, but all was well.
I got the "Bonnet Open" warning, and I figured that I didn't put the cover of the fuse box back on! I had no idea that it meant the hood! LR3 HSE
http://www.pbase.com/jzk/lr3
|
| 28th Apr 2005 2:17 am |
|
|
freeflytim
Member Since: 18 Feb 2005
Location: Chattanooga, TN
Posts: 297
|
Damn... thats a roadtrip... Chicago to Orlando!!! What, about 1200 miles one way??
jzk wrote:When I was in Orlando with the truck...
|
| 28th Apr 2005 2:59 am |
|
|
