Lex
Member Since: 21 Jun 2005
Location: Toowoomba Queensland
Posts: 47
  
|
Just ordered a rear wheel carrier from Kaymar. I will also mount my HF radio aerial to the carrier. At present I will opt for a single tyre carrier. Does anyone have any thoughts as to which side is better to carry the spare on?.I thought left as the natural road camber will tend to keep the tyre from falling back onto the vehicle whilst changing a wheel. A Long-Ranger tank [110 litres] should give me a decent range in the desert as well. TDV6 HSE Zambezi/Tundra
|
 24th May 2006 2:04 am |
|
|
PCH
Member Since: 12 Jan 2005
Location: Anywhere but work
Posts: 812
 
|
Lex,
IMHO go with RHS (drivers side for us Aussies) because the number plate is on the LHS and it will be less to mount and wire on the spare wheel.
I don't think blocking the dip in the rear window makes much difference and if the RWC has a gas strut then it should stay open regardless of the road camber (does it have a strut?) .
Chris 2011 Discovery 4 (MY12) SDV6 HSE with General Grabber AT's, Traxide Aux Battery system, custom rear drawers and Autosafe half height cargo barrier
Gone - 2005 Discovery 3 TDV6 HSE
ARB Bull Bar, Warn 9.5XP Winch, IPF D/Lights, Cooper STT's, LR Raised Air Intake, Traxide aux battery system, custom drawers and half height Autosafe cargo barrier, Mitchell Bros 4x4 tow hitch
|
| 24th May 2006 7:23 am |
|
|
Lex
Member Since: 21 Jun 2005
Location: Toowoomba Queensland
Posts: 47
|
Thanks for the input Chris; I forgot to consider the position of the no. plate. I shall now modify my order.
Lex TDV6 HSE Zambezi/Tundra
|
| 24th May 2006 8:27 am |
|
|
