bobster
Member Since: 02 Mar 2010
Location: on top of the hill
Posts: 4
|
Hi
Anyone know if you can swop the standard lights on a XS to normal Xenons
as I dont really want to fit extra driving lights to improve the lighting
thanks all
|
 6th Mar 2010 11:36 am |
|
|
Dexter
Member Since: 21 Sep 2007
Location: Aberdeenshire
Posts: 1394
|
Yup, did mine at Christmas on a 57 plate xs fitted with standard halogen lights - bought some used xenons from a site member. Took 10 minutes in minus 10 or so and a big improvement. Look 8) too! 
Dex
|
| 8th Mar 2010 11:48 am |
|
|
Martin
Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18561
  
|
Are you asking for a D4 or D3? 06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
|
| 8th Mar 2010 11:55 am |
|
|
Dexter
Member Since: 21 Sep 2007
Location: Aberdeenshire
Posts: 1394
|
Doh !!! 
Wrong section 
|
| 8th Mar 2010 12:00 pm |
|
|
bobster
Member Since: 02 Mar 2010
Location: on top of the hill
Posts: 4
|
Martin wrote:Are you asking for a D4 or D3?
to
TO CHANGE FROM HALOGEN TO STANDARD XENONS ON A D4
|
| 8th Mar 2010 7:43 pm |
|
|
Winger
Site Moderator
Member Since: 15 Feb 2005
Location: UK
Posts: 3428
 
|
I'd like to think that this was possible. There is the danger that it isn't quite as plug and play as the D3, and please don't ask about adaptives....that's one step beyond.
|
| 8th Mar 2010 8:00 pm |
|
|
Bill Wright
Member Since: 03 Nov 2007
Location: Glorious Devon
Posts: 3254
 
|
Any further development on this? Is it possible to upgrade to non-adaptive Xenons on the D4 as a DIY job?
Bill Wright Never take life too seriously. Nobody gets out alive anyway.
D4 SDV6 SE Tech Kaikoura Stone MY15.
|
| 19th Mar 2010 4:55 pm |
|
|
DigitalJunior
Member Since: 22 Nov 2008
Location: Cumbria
Posts: 4401
|
Pete has done some testing and to move from Halogen to Xenon (non and adaptive) is possible but requires software activation for them to work. Its not like the D3 where they would just work, you now have to tell the D4 they are fitted otherwise they light up and then go out again.
So far I have only supplied D4 Xenon adaptives as the standard D4 Xenons haven't come through yet.
Pete has done the work and more information is in this thread.
http://www.disco3.co.uk/forum/topic47992.h...4+adaptive SOLD - 23my Range Rover Sport D300 Dynamic SE
|
| 19th Mar 2010 5:25 pm |
|
|
GraemeS
Member Since: 17 Mar 2008
Location: NSW
Posts: 706
 
|
The software activation was to get the cornerning lamps working in the adaptive lights. Non-adaptives seem not to have the cornering lamps so no activation is required.
|
| 19th Mar 2010 7:04 pm |
|
|
ljason286
Member Since: 11 Dec 2007
Location: Barham
Posts: 174
|
GraemeS wrote:The software activation was to get the cornerning lamps working in the adaptive lights. Non-adaptives seem not to have the cornering lamps so no activation is required.
i think you are wrong because i have got a set of bi xenons with out the adaptive lamps and the lights come on then go out
Avctivation is being done on sunday by pete from bellauto
|
| 19th Mar 2010 7:16 pm |
|
|
bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
|
As said by ljason286, If Halogens are removed and the Xenons are fitted in place they need turning on because the Body control ecu sences an overload when the Xenon fires up and cuts power to the light.
The only part that is plug and play is the LED Angel lights in place of the normal side light which is no good for seeing in the dark.
If Xenon Adapties are fitted the conrering can be enabled to work also because the wire needed is fitted as standard, however the Adaptive motor part does not work because there is a module missing.
I will have eventually a full conversion available for fully adaptive lights working in the correct way as per landrover, but for the moment the only option is Xenons or Xenons with cornering and of coruse both come with LED Angel lights.
ljason286's are now fitted and working perfectly after todays meet with him, along with the 4x4 info screen, Tow bar activation, Voice enabled and chirp on alarm set and unset 
Pete
Last edited by bellautos on 23rd Mar 2010 9:40 pm. Edited 1 time in total
|
| 21st Mar 2010 9:40 pm |
|
|
ljason286
Member Since: 11 Dec 2007
Location: Barham
Posts: 174
|
Thanks again pete nice to put a face to the name
Just got back from liverpool
Took 3.5 hours to get back to kent at 28.9mpgs
The sat nav 4x4 info is great and the xenons are much better then the halogens
I think that i,m the only D4 in kent with a beep to arm and dis arm the alarm
This is a must have upgrade on a XS
xenons and sat nav upgrade
|
| 23rd Mar 2010 5:50 pm |
|
|
bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
|
Your welcome Jason.
Pete
|
| 23rd Mar 2010 7:40 pm |
|
|
hids4u
Member Since: 12 Apr 2009
Location: Leeds
Posts: 1155
|
I am sure one of our kits would work without having to reprogramme the ecu
Any D4 owners out there willing to try for a good discount?
|
| 23rd Mar 2010 8:56 pm |
|
|
bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
|
The normal HID's and CAN friendly HID kits large or slim ballasts do work in most cases without any modification to the car its agreed, with a big BUT im afraid to say.
Basicly if the ballast goes faulty and the lights try to turn on, the BCU of the car has a major shut down and with this shut down the engine stops 
Ive tested various kits and re created problems with the kits ranging from short circuit to hi load drain and im sorry to say this is why i removed them from my car as they were really not safe especially when the engine cuts out if the lights turn on automaticly and you are not expecting it a 60mph as it did with me.
Please Please dont take my post as criticism, im only giving my safety opinion of HIDs in D4 which as said i think should be forgotten about incase of the problems.
Pete
Last edited by bellautos on 23rd Mar 2010 9:42 pm. Edited 1 time in total
|
| 23rd Mar 2010 9:06 pm |
|
|
