Jakey
Member Since: 16 Sep 2010
Location: HK
Posts: 3
  
|
| Park Distant Control Fail |
|
There is no respond on both frant & rear sensor.
And no respond with pressinf the PDC button.
Only a left side red lamp flashing in Tachometer.
Could anyone help on this?
My D3 is 2006 2.7TDV6 Automatic.
|
 23rd Sep 2010 6:54 am |
|
|
TallPaul
Member Since: 03 Jan 2008
Location: Near Reading
Posts: 1214
|
Probably water or small cut in the plastic protecting the wire in the loom, at the back (well was on ours).
Any faulty sensor knocks out the whole system.
|
| 4th Oct 2010 10:11 am |
|
|
willou
Member Since: 08 Jan 2010
Location: warrington
Posts: 2
|
Just fitted new module. still getting fault from time to time with the PDC on constant. sounds like the front, I have had the bumper off to check the harness but can not see a problem. Something so small can be such a pain. 
|
| 4th Oct 2010 6:29 pm |
|
|
