Thanks for the picture and congrats on your first post on disco3.co.uk
16th Nov 2006 9:01 am
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73132
JMC, you'd have been proud on Saturday with all those Mantec plates getting their first taste of mud. More there that U could have shaken a stick at. They were not that shiney for long!
19th Nov 2006 6:05 pm
simkna
Member Since: 21 Feb 2006
Location: Leicester
Posts: 806
I have to say mine made an excellent sand scoop on Saturday.
Some of those without Mantec plates were less fortunate, and had to have their plastic covers dug out of the sand.
Si.Pat's Van
D3 TDV6 S Auto
Rimini Red / Alpacca Leather
19th Nov 2006 7:38 pm
Gareth Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26779
One problem. I found the access to the recovery point too small for my shackles.
I was attaching the anchor vehicle (Discostu and Discoflo) to back of Slimer with my rope, and could not get my shackle bolt in. I had to borrow a much smaller shackle.
19th Nov 2006 8:18 pm
lee01277
Member Since: 06 May 2005
Location: Shed
Posts: 821
DiscoStu wrote:
DD - you need to remove the plastic 'sump guard' first. You need either a 2p or 50p piece to turn the 7 plastic screws (3 at the front edge, 4 at the back). They only turn 90 degrees! This guard then pulls out of the way.
... or use the Sand Pit at Yarwell ...
Just got to page 17 of 30 reading up on this one. Without reading the rest, any plans for another group buy ?..............Somewhere in-between my old D3 and what's to come next .........
19th Nov 2006 8:52 pm
DiscoStu
Member Since: 09 Apr 2006
Location: London
Posts: 11412
My Mantec tray worked really well on Saturday. I thumped the ground a few times at the front and although I haven't cleaned it yet or looked underneath, I'm sure the Mantec tray protected the D3.
I dug out those two plastic trays from the sand. I've still got one in my boot. Anyones?Matt
19th Nov 2006 9:01 pm
Gareth Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26779
I think 10forcash lost his. He was not too worried as he's fitting his winch etc.
19th Nov 2006 9:13 pm
lee01277
Member Since: 06 May 2005
Location: Shed
Posts: 821
d3matt wrote:
My Mantec tray worked really well on Saturday. I thumped the ground a few times at the front and although I haven't cleaned it yet or looked underneath, I'm sure the Mantec tray protected the D3.
I dug out those two plastic trays from the sand. I've still got one in my boot. Anyones?
Names and faces...
Thought it was Simon who found mine ..
So, belated thanks to you ..............Somewhere in-between my old D3 and what's to come next .........
Because the ones that were 'playing' kept away from the ones that were training, we didn't really get a chance to meet the new guys.
Maybe next time.Matt
19th Nov 2006 11:18 pm
Barn1e D3 Decade
Member Since: 28 Aug 2006
Location: Mid-sussex
Posts: 2021
I managed to get some scratches on my Mantec plate I hope they don't wash off or fade with time! 2005, TDV6 S, Auto, 190k miles, owned from new, V8 Brake Upgrade, Nancom Evo, RLD protector, BAS EGR blanking & Remap, separate ATF cooler, changing all the fluids ahead of time.
20th Nov 2006 8:49 am
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73132
d3matt wrote:
That's ok.
Because the ones that were 'playing' kept away from the ones that were training, we didn't really get a chance to meet the new guys.
Maybe next time.
Definately! We thought we (D3Matt, VA & Me) were joining the new(er) guys for lunch but you were all still on the relentless quest for knowledge. We went down the pub instead! 8)
20th Nov 2006 9:02 am
simkna
Member Since: 21 Feb 2006
Location: Leicester
Posts: 806
A few of us went to the pub, but I think we had just arrived back as you were leaving.
Si.Pat's Van
D3 TDV6 S Auto
Rimini Red / Alpacca Leather
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Names and faces... 
