Member Since: 07 Oct 2006
Location: Northants
Posts: 171
Starting problem
Got into my D4 yesterday, smart key in pocket, pressed starter button - nothing. The battery was fine. The screens were on, just no ignition.
Went to get the other smart key, same problem. Keys lock and unlock vehicle, and the smart key was recognised as I could open the door from locked by pulling the door handle.
Called LR Assist, who were very helpful and said that a technician would be with me in an hour.
Locked vehicle, left for 5 minutes, unlocked - and all was reset and working fine, started immediately. So I called LR Assist to cancel.
So - always well worth a lock / wait / retry sequence if anything like this happens!Paul
D4 HSE Zermatt Silver / Ebony
8th Feb 2011 9:26 am
WelshDisco
Member Since: 24 Sep 2007
Location: Cynon Valley
Posts: 123
All I can add is when I had my D4 I was told to put my foot on the brake before starting the car! I have not tried anything different but it starts first time - yes and its with the key in my pocket!2010/60 Discovery 4 XS Zermatt Silver - Privacy Glass, Timed Climate (with remote), Voice, 4x4 screen, Bong on lock/un-lock (Pete BellAutos)
Discovery TDV6 SE (06) Gone!
Military 90 (1986) gone but not fogotten!
TV Option (Thanks to Wiggs)
Parrot CK3100
8th Feb 2011 6:16 pm
Supercharged
Member Since: 07 Oct 2006
Location: Northants
Posts: 171
Yes indeed - I was pressing the brake pedal of course!
If you don't press the brake pedal, normally the car will go into "ignition on" mode but not start.
In this instance, nothing happened at all, brake on or off.Paul
D4 HSE Zermatt Silver / Ebony
9th Feb 2011 8:31 am
stick
Member Since: 13 Jan 2010
Location: hants
Posts: 604
Has happened to me once too - do you intend to do anything about it?d4 HSE
Happened to me twice very early on, but never recurred after the 2010 MS software patches assurance programme. Check your vehicle doesn't have any outstanding updates needed.LRs are a fond memory, apart from the maintenance.
9th Feb 2011 3:44 pm
Mikepa
Member Since: 15 Jan 2011
Location: Massachusetts
Posts: 5
Seen this myself
This has happened to me twice now.
Once shortly after picking up the vehicle a month or so ago and again this past week. This last time, it did not turn on after two attempts. Made sure I was not trying to turn on/off the radio as I have done this a few times (why again are these buttons so close to one another).
Tried a third time and it turned over as normal.
It's a good thing mfg's are moving away from troublesome mechanical keys to something more reliable. 2011 LR4 HSE LUX (Black/black)
ex-2003 D2 HSE7 (Black/Black)
ex-1999 D2 HSE (White/Black)
12th Feb 2011 4:33 pm
Supercharged
Member Since: 07 Oct 2006
Location: Northants
Posts: 171
Car is back from the dealers after having a look at this and fixing a few niggles.
Will wait and see if it happens again. Hopefully not ....Paul
D4 HSE Zermatt Silver / Ebony
12th Feb 2011 5:55 pm
Selkie
Member Since: 07 Mar 2008
Location: Caithness
Posts: 17
Ive just had my start/stop button replaced.
Sometimes it would not work at all to start or stop, other times you had to push it quite hard but most of the time it worked fine.
The dealer took a bit of convincing but 1 new switch later and all is well.
What you have to remember is that when it's colder outside, the starting up process will take longer because it waits for the glo-plugs to heat up properly. SWMBO was the same as you, and as a result she thought it's not starting and tried pushing the button harder/longer and it worked, althou it was just that she'd held it a few seconds longer than normal.
So I recon at the next spell of cold weather you'll have the same with this new switch.LRs are a fond memory, apart from the maintenance.
4th Mar 2011 11:30 am
Selkie
Member Since: 07 Mar 2008
Location: Caithness
Posts: 17
Well well, you don't say.................
I am aware the starter button is not a strain gauge but a make / break (I have a degree in electronics so understand the subtle difference)
The problem was the switch was not making contact, If you pressed very hard at the top of the button you could get it to work.
The dealer initially took the "treat the owner like an idiot" approach like you have done. I insisted I was not going to put the car in until they had a new switch in stock.
The switch as duly diagnosed to be at fault and was changed.
No problems since regardless of temperature
4th Mar 2011 1:52 pm
Phat Face
Member Since: 08 Jul 2009
Location: Gloucester
Posts: 354
I think you must have a degree in being bloody rude too. Lloyd "Phat Face"
2006 TDV6 HSE in Bonatti Grey
Club 19" GGAT's
Club B.A.S. EGR Bypass
4th Mar 2011 11:25 pm
SN
Member Since: 03 Jan 2006
Location: Romiley
Posts: 13710
Steve N | 21MY Defender | 08MY Discovery 3 (history) | 06MY Discovery 3 (ancient history)
5th Mar 2011 12:07 am
Russell
Member Since: 23 Aug 2007
Location: Kent
Posts: 10564
Phat Face wrote:
I think you must have a degree in being bloody rude too.
Think that is putting it gently, the comment was out of order and not called for. MrH was just making an observation about the issue he had found. MY17 D5 1st Edition Namib Orange
MY15 D4 HSE Kaikoura Stone
MY12 D4 HSE Nara Bronze Sold and gone
MY11 D4 HSE Stornaway Grey Sold and gone
D3 S spec Silver Sold and gone
Tow bar, full length roof bars, side steps, tow bar storage unit, surround camers.
D4 camera club
5th Mar 2011 2:50 am
Selkie
Member Since: 07 Mar 2008
Location: Caithness
Posts: 17
Gents,
I beg to differ. It’s all a matter of perspective, looking at it from my point of view I found Mr Hs reply to be very condescending.
I apologise if my reply came across as somewhat brusque.
I was merely posting a short reply which illustrated that I had a genuine problem with my switch and the dealer tried to fob me off with the same excuses.
I posted the information in good faith hoping it could help someone out in the future.
5th Mar 2011 8:00 am
colin6307
Member Since: 17 Apr 2010
Location: croydon
Posts: 246
starter button
Sir
Say it as it is, if they don't like it tough, to much pussy footing about these days
Cheers
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
The switch is not pressure sensitive?
