rhoyle
Member Since: 27 Jul 2011
Location: Brentwood
Posts: 18
  
|
kjetiljy wrote:TheChief wrote:Could you PM me the same list as you did wyaflk, Wiggs, please 
And me, please;)
And again...I do have voice control so Iguess no mic needed?
|
 27th Jul 2011 11:11 pm |
|
|
s_ghost
Member Since: 03 Mar 2011
Location: Luxembourg
Posts: 8
 
|
Hi master, sorry wiggs !!!
Is it possible to send the list of the parts (yes i know another one, who wants .... )
needed for the installation. Have 3 VUB kits at home ... but wants to try the other way.
Regards ... JJ
|
| 3rd Aug 2011 5:09 am |
|
|
dominicbeirne
Member Since: 19 Apr 2011
Location: Brisbane, Qld
Posts: 10
 
|
| Assistance required in OZ |
|
Hi Wiggs,
Can you also please send me the list of parts I will need, I have an MY09 SE with Harmon Kardon speakers and the phone capable radio unit. I have bought a genuine LR screen to go in the space above the radio, that is yet to be installed, so any advice on what parts etc will be needed for that would be greatly appreciated. Also if you don't mind the price to supply and send to Australia. I do like the Aussie Dollar being strong at the moment.
Thanks in advance
Dom now - 2009 SE Santorini Black
77 - 81 learnt to drive in Dad's 1st Rangie on Stradbroke Island, Fraser Island and Dirranbandi Queensland
81 - 83 thrashed his 2nd Rangie paddock bashing at Dirranbandi
84 - 87 knicked off with his last Rangie up through Cooloola Sand Mass, Teewah Coloured Sands and Fraser Island Queensland
86 - 92 Australian Army various Series and 110 Landies
|
| 3rd Aug 2011 1:01 pm |
|
|
AndrewT49
Member Since: 22 Sep 2010
Location: Sunshine Coast
Posts: 4
|
| Bluetooth Assistance in Oz |
|
Hi Dom,
I also have a MY09 D3 SE and have been wondering how to fit Bluetooth. Could you advise how you got the screen for the centre of the dash. Are you going to use it for Sat Nav as well?
It sounds as though you have researched this fairly well. Could you advise what's involved?
How did you go for the parts? Are you going to install this yourself?
Cheers
Andrew 
|
| 23rd Aug 2011 12:26 pm |
|
|
kestrelpc
Member Since: 09 Nov 2010
Location: Essex
Posts: 114
|
Hi Wiggs, not wishing this to become a 'me too' thread, but could you possibly let me know what would be needed to add bluetooth to my 2005 D3 HSE. it already has the voice activation switch (and mic) on the left of the steering wheel and the phone button on the center consul, would just adding the bluetooth module work (by using the phone switch) or do I need to add the steering wheel switches/cabling etc... (I don't fancy chancing removal of the airbag). Failing this I may just stick with my bluetooth earpiece but having it incorporated into the vehicle would be nice.
Thanks
|
| 7th Sep 2011 7:53 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
 
|
You need a Bluetooth module . You also need to connect it into the most system ( I have some plug and play leads for this )
Also connect power and ground to the module .
Too be honest I have never tried without the phone steering wheel buttons ... But can't see why it wouldn't work ....although it's very easy to take off the airbag
It needs to be enabled to make it work G4 Gone ...but not forgotten
|
| 7th Sep 2011 8:00 pm |
|
|
kestrelpc
Member Since: 09 Nov 2010
Location: Essex
Posts: 114
|
Thanks for the info, thats what I like about this forum (been lurking for a while but only just got the car), people are always willing to offer help and advice almost before I ask the question 
|
| 7th Sep 2011 8:08 pm |
|
|
AndrewT49
Member Since: 22 Sep 2010
Location: Sunshine Coast
Posts: 4
|
Hi Wiggs,
Have been following this thread with great interest. I was reading your post where you installed the D4 bluetooth module and you showed a picture of the drivers centre display with the phone call info.
My question is - does this apply to all D3's? My Disco is a 09MY model.
Another question which I haven't been able to find an answer to yet without removing the steering wheel air bag is - is the wiring preinstalled for the phone steering wheel switches and when you install the switches does the rear moulding have to be replaced as well?
Look forward to your reply.
Cheers
|
| 9th Sep 2011 3:30 am |
|
|
albal
Member Since: 31 Jul 2011
Location: Southampton
Posts: 592
|
It applies to all D3's but you might find like I did that there is a loom behind the passenger footwell panel. All the wiring is there ready to have the connectors plugged into.
With the rear moulding you will have to cut out an area for the switch unit to seat into, the plastic cuts easily enough with a Stanley knife.
|
| 9th Sep 2011 2:54 pm |
|
|
fozzey252
Member Since: 14 Sep 2011
Location: worcester
Posts: 1
|
| bluetooth for my05 HSe with voice act satnav |
|
Wiggs
Very much a me too i'm afraid but just got my D3 and found I got no phone although i do have the voice activated satnav.
Also just for interest had the Gearbox oil filter changed and what a difference that made.
Would appreciate any help including a list of the kit and options and more than happy to cross you palm 05 D3 HSE 7 seat Auto -Toy 1 on road
95 300TDI Classic Vogue SE - Now gone
94 300TDI D1 Base Manual - Toy 2 on road
76 2 Door Pick Up Comp Safari Motor - Toy 1 off road
Faultmate
|
| 16th Sep 2011 9:20 pm |
|
|
pigeon
Member Since: 10 Sep 2011
Location: gloucester
Posts: 685
|
i've got the mic, button on the dash would i have bluetooth? tried with my phone but no bluetooth found
|
| 21st Sep 2011 7:53 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
|
Any phone buttons on the steering wheel ? G4 Gone ...but not forgotten
|
| 21st Sep 2011 8:13 pm |
|
|
pigeon
Member Since: 10 Sep 2011
Location: gloucester
Posts: 685
|
nope
|
| 21st Sep 2011 8:35 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
|
Still can be fitted .. As long as you have the 6 disk cd head unit . G4 Gone ...but not forgotten
|
| 21st Sep 2011 9:51 pm |
|
|
pigeon
Member Since: 10 Sep 2011
Location: gloucester
Posts: 685
|
yes got a 6disk cd.
what do i need.
|
| 22nd Sep 2011 11:27 am |
|
|
