Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
DISCO4.COM > Technical (D3)

Clutch Judder/stalling when braking
Post Reply  Down to end
Page 1 of 1
jeccles2
 


Member Since: 12 Dec 2010
Location: Suffolk
Posts: 18

United Kingdom 2011 Discovery 4 3.0 SDV6 HSE Auto Santorini BlackDiscovery 4
Clutch Judder/stalling when braking

Does this ring a bell with anybody...

Slowing down for a junction, dip the clutch to change to lower gear and as I apply brakes I get a clutch judder and sometimes the engine stalls. It feels like the clutch is not completely disengaged but my foot is to the floor.

Gear changes work fine and the clutch pedal comes up about an inch before I feel the drive engaging when taking off so clutch action seems normal. It feels to me that when I apply brakes as I change down this somehow releases some of the clutch hydraulic pressure causing the slave cylinder to release slightly as I know clutch and brake master cylinders share a common reservoir.
  
Post #7931925th May 2011 5:36 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site