Member Since: 12 Apr 2009
Location: Leeds
Posts: 1155
GVIF v2 and Reversing Camera for 199.99
The box full of the V2 GVIF units arrived this week so ready to ship out. There are only 50 then they are all gone.
They have same functions as the 6.2 and look the same. The remote is just a little bigger
This is set up you need to retrofit reversing camera to allow you to get the image on your sat nav screen when you select reverse (without going into hidden menu) and it also allows you to add tv or dvd image to the screen
Hello Ian,
my wife has a LR Freelander II (MY 09). Can this GVIF unit be used to connect a rear view cam to it's sat nav screen ? Is a camera that fits in the number plate light also included ?
Thanks
7th Jun 2011 7:27 am
maxheadroom
Member Since: 21 Mar 2011
Location: newcastle under lyme
Posts: 10
Hi Ian, just bought one of these units hope they are easy enough for my wife to install lol ,,, she does love a challenge.
Regards Rob.
7th Jun 2011 8:34 am
Mark P
Member Since: 23 May 2011
Location: Birmingham
Posts: 197
Hi Ian,
Is this something that can be done DIY or is a vehicle electrician needed?
Thanks
MarkIf you always do what you've always done, You'll always get what you've always got
2005 HSE D3
8th Jun 2011 10:25 pm
Stonk101
Member Since: 08 May 2011
Location: Earl Shilton
Posts: 13
Morning,
Order placed Monday 12:00, camera fitted and working within 36hrs.
Member Since: 07 Jan 2009
Location: Arnhem
Posts: 1967
Mark P wrote:
Is this something that can be done DIY or is a vehicle electrician needed?
A little soldering is all it takes on the electrickery side.
WiljoD3 V8 HSE Auto in Zermatt silver - driveway version gone but not forgotten, only the living room cupboard version remains
9th Jun 2011 12:17 pm
LUPO
Member Since: 14 Feb 2008
Location: Berg
Posts: 7
Hi Ian,
When I select the link I get the "OUT OF STOCK" message.
Can I still order the package?
Regards,
Peter
14th Jun 2011 7:37 pm
LUPO
Member Since: 14 Feb 2008
Location: Berg
Posts: 7
Item was available again in the shop.
So it's ordered.
I'm curious if it's OK stuff.
I'll Keep you informed.
Peter
15th Jun 2011 7:54 pm
hids4u
Member Since: 12 Apr 2009
Location: Leeds
Posts: 1155
Stonk101 wrote:
Morning,
Order placed Monday 12:00, camera fitted and working within 36hrs.
I finally added (or should i say had it done) the front number plate surround with forward facy sony ccd camera. its a great image a tad low if i am honest but ideal for off roading and seeing down the hill in front and does do a good job of seeing how close to the car wall in front you are. will post images - just waiting to get a new phone as i lost mine with the pictures on it
Regards
Ian
16th Jun 2011 9:05 pm
LUPO
Member Since: 14 Feb 2008
Location: Berg
Posts: 7
Hey Ian (or anybody else),
I received last week the GVIF box.
Tried to install it today but it doesn't seem to work as specified in the manual you provided.
javascript:emoticon('')
I can't toggle between the different AV modes. If the Dip-Switches set 1 and 7 ON all the rest of, I get or Sat-Nav
or the AV1 input if it was connected when activating the key of the car.
I have the impression it's due to the REV2 features.
I found a manual specific for the GVIF-07 REV2 box on the net and their they specify some different fitting-instructions:
the Orange power cable should be connected to Ignition active (I-Drive)
the CAN-BUS must be connected white to yellow and yellow to green (resp from GVIF to the Car CAN-BUS)
the dip switches are specified as follows:
#PIN Operating when turn DIP S/W on
1 NAVI INPUT MUTE 􀃆 Skipping NAVI Mode.
2 A/V 1 MUTE 􀃆 Skipping A/V 1
3 A/V 2 MUTE 􀃆 Skipping A/V 2
4 A/V 3 MUTE 􀃆 Skipping A/V 3
5 On : For Lexus Off : For Land Rover
6 On : For original Navi, (OEM screen)
7 When to choose rear mode (ON : CVBS4, OFF : MAIN)
8 N.C
So for testing (disregarding rev-cam for the moment) only switch 6 should be ON.
The thing I didn't do so far is connecting the CAN-BUS, which I will try out tomorrow.
But can you help me out with this.
Rgds,
Peter
25th Jun 2011 8:39 pm
LUPO
Member Since: 14 Feb 2008
Location: Berg
Posts: 7
Hey Ian,
Another thing I just noticed. The remote control I received is the small one from the GVIF 6.1 version and not the bigger one from verson7.
And the reverse camera is not the one with the integrated number plate lights but a default one even without Night vision.
Could you correct the shipment.
Best Regards,
Peter
25th Jun 2011 9:33 pm
hids4u
Member Since: 12 Apr 2009
Location: Leeds
Posts: 1155
Peter
Please dont connect the Can Bus - as I recommend in the manual and the site
Please can you email me the version number and ref on the box that you have ianboothib"yahoo.com
The manufacturers manual are normally wrong and they got on and off wrong all the time - hence our manual. The latest version in my footer note - is correct for version 6.2.
I dont have a 2.1 version with me - i am travelling from Poland to the UK at present.
I will reply to your email when it comes through
Regards
Ian
27th Jun 2011 10:17 am
Spooky
Member Since: 02 Jun 2009
Location: Swindon, Wilts
Posts: 1013
Ordered.
I also purchased some 'H8' LED bulbs, but was unable to enter the Discount Code for this only, so didn't put it in at all ...Regards,
Mick
- 2014 SDV8 Autobiography
- 'Vincent' - 2010 TdV8 Vogue SE - 'Molly' - 2005 HSE Auto
'Dixie' - 2000 D2 Td5 ES
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
')
- 2014 SDV8 Autobiography
