Member Since: 15 Oct 2011
Location: Hopefully at a race track.
Posts: 851
Sorry just sold an old macbook pro (quite cheep also) to another mate that needed it for something. else that would of been ideal.
5th Jan 2012 11:04 am
cold_n_wet
Member Since: 05 May 2009
Location: Bergen
Posts: 1509
I know that pete, but if I send my cable to a punter 800 km away I am until he sends it back.IDTOOL PRO / Faultmate programing and BAS remaping services in Norway.
Diagnostic for most Land rover vehicles
Land Rover parts and accessories.
Stockist of RLD equipment.
www.praesto4x4.no
D4 gone, missed but replaced with a 110 Puma.
5th Jan 2012 1:18 pm
ids
Member Since: 12 May 2009
Location: Herefordshire
Posts: 384
BBS SPY wrote:
Thanks Guys
Firstly, you would need to have a VCI2 with a 9 way D type connector that can be plugged either directly into a PC's serial port or via a USB to serial adapter if your PC does not have a serial port.
This comes as described automatically with our FCR for CAN BUS vehicles, can be purchased on it's own from our web shop as item LD035 under FCR for about 80 GBP plus VAT & shipping etc, or one borrowed from an MSV-2 for CAN BUS vehicles can be used, with a 15 to 9 way adapter LD040 from the accessories section for about 3.50 GBP plus all the usual.
If anyone wants to build this themselves, we can supply a diagram.
Hi Colin
Do you have a PDF/downloadable diagram for this... ? Looking forward to this being available.
Ids
8th Jan 2012 6:42 pm
pom
Member Since: 10 Feb 2008
Location: Worcestershire
Posts: 1790
IF you want to try out a Mac why not just run one as a virtual machine, saves having to buy a real one.
Pom
8th Jan 2012 8:07 pm
BBS SPY Site Sponsor
Member Since: 15 Jun 2007
Location: Sunny Cyprus
Posts: 3054
Hiya IDS
Not yet, but it's not difficult, from 15 to 9 way you have Pin 9 to 3 for earth, pin 2 to 14 and pin 3 to 15 which do RX and TX.
pom, Thanks for the input, but it's likely i will need to run windows emulation on the Mac, so emulating the Mac on a windows PC first to then run a windows emulation inside that is probably an emulation too far methinks
Anyway i found a cheap Macbook on Ebay so i am all sorted for this now
For the benefit of those wanting to have a first peek at Genesis in action and to see how simple we have made it to use, i knocked up a quick demo video of enabling 4x4 info on a D3 using Genesis and put it on you tube today.
To re iterate the over web aspect, i used an Ipad to connect to the Genesis web site and do the job. Considering that this site is currently located in a server somewhere in Gemany, it's pretty impressive stuff.
However we are working towards creating a more interesting and hands on demonstration of Genesis by setting up a small number of instrument packs with Web cams pointed at them. We will then connect them to the Genesis site and provide guest accounts for these that anyone can log in with and then turn on any warning lamp and set the needles to various positions etc. They will be able to see the result of their request on the genesis web site occur in real time on the Instrument pack using the web cam feed. One cool trick will be the ability to make the central message display, show any one of it's 150 odd pre defined messages.
30th Jan 2012 6:02 pm
maplecottage
Member Since: 01 Feb 2011
Location: Norfolk
Posts: 3171
Eagerly awaited
30th Jan 2012 6:14 pm
D4JWW
Member Since: 20 Oct 2009
Location: London, UK
Posts: 1318
Colin well done, only just stumbled across this, happy to help with my MSV 2, multi vehicle license! A few mods... and keeping it all running...Faultmate MSV2
MY09EGR's blanked Thanks Bellautos, BAS
30th Jan 2012 8:32 pm
marco 110
Member Since: 15 Nov 2009
Location: SALLES 33
Posts: 1014
very impatient to see that!
I want one, pre-order for me! Marco.
-D4 sdv6 HSE 2012 , high beam assist , surround cam, tv , and a lot of nice stuff..
Member Since: 24 Jan 2010
Location: West kent
Posts: 8531
be nice to know what happens to us with multi veh is our investment going to be worthless
5th Feb 2012 4:04 pm
BBS SPY Site Sponsor
Member Since: 15 Jun 2007
Location: Sunny Cyprus
Posts: 3054
Hiya Geoff
Did you not read this thread from the start?
I have absolutely no intent whatsoever to have Genesis become a replacement for our existing equipment and would certainly do nothing that would undermine existing customers investments.
Genesis is simply an exciting and innovative extension to our products, that will ultimately allow you as an existing MSV-2 MV owner to offer your services to anyone or everyone, no matter where they live in the entire world, rather than those just local to you.
Raw CCF editing is no simple thing and i would never dream of offering this kind of raw capability to anyone who had not already invested in our MSV-2 system and have the benefit of the help, experience and expertize it alone provides.
As long as i am in charge, your investment is totally safe.
Now, i believe you owe me a beer
5th Feb 2012 5:25 pm
JDB
Member Since: 25 Mar 2010
Location: NW Hampshire
Posts: 2486
BBS SPY wrote:
Now, i believe you owe me a beer
There's a few of us in that category!
5th Feb 2012 5:29 pm
geoff.
Member Since: 24 Jan 2010
Location: West kent
Posts: 8531
Colin
always a fews beers on ice for you mate, and thanks for reassuring our investment is safe
be nice to know what happens to us with multi vehicle in our investment going to be worthless
If I understand this properly, those who have made the multi vehicle investment now can now provide service for a fee to people such as myself half a world away, or even a few blocks away.
All I have to do is connect to you via the internet, pay you some money, and you do the modifications over the wire rather than by standing beside the vehicle.
The world becomes your market, not just the local neighbourhood. That is how the internet can work and I think in this case, does.
Am I understanding the possibilities correctly?2005 LR3 HSE 4.4L AJ-V8 petrol; Traxide Dual Battery; PIAA 2500K Yellow Ion H11 Fog Light bulbs; CounterAct LT-2 Capacitive Corrosion control; LLumar AIR80 Blue clear Infra Red blocking side window film; Liftgate manual release; Schrader Valve "air in" mod to OEM air suspension reservoir tank; Akebono ceramic pads; OEM solid vented discs; LR4 design hitch receiver; Wiggs D4 MOST bluetooth module; Clock on the Dash; 3 Flash signal light mod; Backup Camera; 2015/16 Nav Data update.
5th Feb 2012 6:41 pm
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
That's exactly how I understand it Bruce
Although the commercials aren't clear yet, I'm anticipating being able to do this anywhere.Bodsys Brake Bible
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset See It Here
5th Feb 2012 6:55 pm
WOODY179
Member Since: 01 Jun 2005
Location: Chesterfield
Posts: 3654
BBS SPY wrote:
Raw CCF editing is no simple thing and i would never dream of offering this kind of raw capability to anyone who had not already invested in our MSV-2 system and have the benefit of the help, experience and expertize it alone provides.
are you now saying that Genesis will only be available to MSV-2 owners, as earlier on in this thread you stated
BBS SPY wrote:
Owners of neither an MSV-2 or FCR will be able to buy just the lead and have full diagnostic capability, albeit only over the internet.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
until he sends it back.
are you now saying that Genesis will only be available to MSV-2 owners, as earlier on in this thread you stated
