Member Since: 15 Feb 2010
Location: Sydney
Posts: 57
Brake pad replacement error message
My Disco 4 has just hit 52000km and the "brake pads worn" warning has come up on my dash. The dealer did warn me that my rear pads were ready for replacement.
I bought some original brake pads (which ferodo makes for landrover) and changed them. We also relocated the brake pad wear sensor back in it's perch and the rear right brake pad.
The warning still comes up on the dash.
Is there an easy way to clear it or do I have to get the dealer to clear it.Disco 4 SE
Honda CRF450X
20th Feb 2012 12:27 am
crwoody
Member Since: 09 Mar 2009
Location: Littleborough
Posts: 2109
The warning light is cleared automatically once the worn-through sensor(s) are replaced, provided of course there's not a wiring fault, it simply responds to continuity in the circuit.
Have you checked both sensors? (front as well as rear?)Clive
20th Feb 2012 9:10 am
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
When you removed the sensor, if it's worn through it will need replacing. (one of them must have worn through , or a wiring fault for yoiu to get the message)Bodsys Brake Bible
Check to make sure the cable for the warning sensors has not been rubbing on something because if it has this will pop the warning light on as well seen a few cables lately that have been badly routed and rubbed through.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum