Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
DISCO4.COM > Tips & Tricks

Suspension noise on full lock
Post Reply  Down to end
Page 1 of 2 12>
SimonH
 


Member Since: 29 Apr 2006
Location: North Yorkshire
Posts: 161

England 
Suspension noise on full lock

When reversing out of the drive onto the road, steering wheel to left full lock, as front wheels descend the small ( 1 inch or so ) step from driveway to road, there is a graunchy, grindy type of noise. Would this be normal... backing off from full lock a wee bit stops the noise. (yeah I know, Doctor Doctor, it hurts when I do this....)
Is there anyone that has experienced similar noise? Is there something wrong with driveshaft or wheel bearing, should I worry now or just mention it at first service in 6 months.

BTW Car just coming up to 5000 miles.

Anyone see the value in a 6000 miles oil change? I will do it if the opinion is that it is worthwhile.

Bought some topup oil from local LR dealer and they gave me Castrol GTX Magnatec, not even GTD deisel oil, just magnatec for modern engines "like what I would put in a petrol car", is this right?

Whoops, more than one question, take your pick...
 NOW SOLD: 2006 TDV6 SE Auto Zermatt silver with Alpaca Leather
Tow Pack, PTI, Full Size Spare 
 
Post #11022915th Dec 2006 2:43 pm
View user's profile Send private message View poster's gallery Reply with quote
Gareth
Site Moderator 


Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26779

United Kingdom 

Your steering lock stops need greasing (at my finger tip in the photo)

Click image to enlarge
[url]

An oil change would not do any harm.[/url]
  
Post #11023015th Dec 2006 2:46 pm
View user's profile Send private message View poster's gallery Reply with quote
10forcash
 


Member Since: 09 Jun 2005
Location: Ubique
Posts: 16534

United Kingdom 2007 Discovery 3 TDV6 HSE Manual Zermatt SilverDiscovery 3

the noise is 'normal', there are a pair of cast bump stops on the lower front wishbones (Gareth has a piccy somewhere) a dab of grease on 'em will stop the noise Wink
IMO an intermediate oil change is only going to help.... but make sure you use a diesel engine oil, the detergents and molecular properties are different to petrol engine oil
  
Post #11023115th Dec 2006 2:48 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
10forcash
 


Member Since: 09 Jun 2005
Location: Ubique
Posts: 16534

United Kingdom 2007 Discovery 3 TDV6 HSE Manual Zermatt SilverDiscovery 3

OK, ya beat me Ner Ner Wink
  
Post #11023215th Dec 2006 2:49 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
SimonH
 


Member Since: 29 Apr 2006
Location: North Yorkshire
Posts: 161

England 

Thanks to all so far, will the grease out, normal or moly?

No takers on the oil spec question yet .....
 NOW SOLD: 2006 TDV6 SE Auto Zermatt silver with Alpaca Leather
Tow Pack, PTI, Full Size Spare 
 
Post #11023615th Dec 2006 3:02 pm
View user's profile Send private message View poster's gallery Reply with quote
Gareth
Site Moderator 


Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26779

United Kingdom 

Normal grease will do. I use the Land Rover branded 5w 30 oil. It is recommended for the TDV6 engine. Its not too expensive either.
  
Post #11024415th Dec 2006 3:33 pm
View user's profile Send private message View poster's gallery Reply with quote
90BHP
 


Member Since: 18 Oct 2006
Location: Half way along the road on the right
Posts: 3706

United Kingdom 2009 Discovery 3 TDV6 XS Auto Stornoway GreyDiscovery 3

result, that is nearly the all time easiest "fix" 20 seconds a side.

I also put a dab on the part the bum stop "bumps" into - was the only clean bit under those arches !!
 "To finish first, one first has to finish ...."  
Post #1537311st May 2007 7:34 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
MarkTaylor
 


Member Since: 28 Dec 2006
Location: Brisbane
Posts: 185

Australia 2006 Discovery 3 4.0 V6 Petrol SE Auto Buckingham BlueDiscovery 3

Wow... this happened to me this morning.. backing out and grind!

Must have a look tomorrow.

Cheers

Mark T
 Nothing of any value is ever achieved without some sacrifice.  
Post #1538892nd May 2007 12:23 pm
View user's profile Send private message View poster's gallery Reply with quote
Gareth
Site Moderator 


Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26779

United Kingdom 

My car just came back with brand shiny new lower wishbones, to which the dealer has applied copious quantities of copperslip grease to the lock stops.
  
Post #1538982nd May 2007 1:20 pm
View user's profile Send private message View poster's gallery Reply with quote
nwoods
 


Member Since: 03 Apr 2006
Location: Southern California
Posts: 563

United States 2005 LR3 4.0 V6 Petrol Base 5 Seat Auto Chawton WhiteLR3

Gareth wrote:
My car just came back with brand shiny new lower wishbones,


Why????
  
Post #1540543rd May 2007 4:30 am
View user's profile Send private message View poster's gallery Reply with quote
Gareth
Site Moderator 


Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26779

United Kingdom 

It was clunking heavily when going over large bumps. Also clunked when the brakes were applied sharply.
  
Post #1540563rd May 2007 5:33 am
View user's profile Send private message View poster's gallery Reply with quote
Bodsy
Site Sponsor 


Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361

United Kingdom 2007 Discovery 3 TDV6 HSE Auto Java BlackDiscovery 3

Was passing my Dealer in Shrewsbury today & as I hadn't got around to buying some grease, popped in to see if they could do it.
No problem & whilst we're at it, we'll order your rear door speaker cover that's split.

Booked in for next wednesday to have the cover replaced. Should only be a pop in visit, over in a couple of minutes.

They initially wanted to book it in for a full check, but (thanks to this site) I knew the problem and the solution. another Thumbs Up to Disco3.co.uk
 Bodsys Brake Bible

D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling


Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here 
 
Post #1540903rd May 2007 9:03 am
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
sufun
 


Member Since: 22 Jun 2006
Location: Wiltshire
Posts: 205

United Kingdom 2005 Discovery 3 TDV6 SE Auto Bonatti GreyDiscovery 3

I had a similar sound this morning but only at access height, reversing with full lock. Is it the same solution?
 TDV6 SE  
Post #16064023rd May 2007 7:49 am
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
DG
Site Moderator 


Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50979

Wales 

Yes Sufun Thumbs Up
 21 year LR veteran > D2 GS 2003 > D3 S 2006 > D3 HSE 2009 > D4 HSE 2013 > D4 HSE 2015 > D5 HSE 2018 > DS HSE R-Dynamic P300e 2021  
Post #16064423rd May 2007 8:00 am
View user's profile Send private message View poster's gallery Reply with quote
sufun
 


Member Since: 22 Jun 2006
Location: Wiltshire
Posts: 205

United Kingdom 2005 Discovery 3 TDV6 SE Auto Bonatti GreyDiscovery 3

Oh Oh ... LR Assistance is coming out to me ... within the hour Embarassed
 TDV6 SE  
Post #16064923rd May 2007 8:08 am
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Display posts from the last:  
Post Reply Back to top
Page 1 of 2 12>
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site