| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
Gazzad
Member Since: 14 Jun 2012
Location: Channel Islands
Posts: 18
  
|
Hi guys,
I've just received my running boards for my D4. It does come with the instructions, and it all seems pretty straightforward, although a bit of faffing. But to make it easier, has anyone put step by step photos up on the forum, or even better video! I have read some of the posts regarding fitment of the boards, and will endeavour to do this at the weekend as it'll probably take a good few hours.
Oh by the way, Dan Roberts (Duckworths) isn't answering my emails, does anyone know if he's away?
Cheers.
|
 26th Jun 2012 4:10 pm |
|
|
Hairy Dan
Member Since: 19 Jan 2011
Location: Co. Durham
Posts: 12319
 
|
Can't help with the running boards but Dan is on holiday although back tomorrow
Out of office thread  Cheers Ian
--------------------
Club N.E.R.D.S
Kielder 4x4 Safari
Discoless
|
| 26th Jun 2012 4:19 pm |
|
|
Russell
Member Since: 23 Aug 2007
Location: Kent
Posts: 10564
|
http://topix.landrover.jlrext.com/topix/co...;id=111886
Hope this link works MY17 D5 1st Edition Namib Orange
MY15 D4 HSE Kaikoura Stone
MY12 D4 HSE Nara Bronze Sold and gone
MY11 D4 HSE Stornaway Grey Sold and gone
D3 S spec Silver Sold and gone
Tow bar, full length roof bars, side steps, tow bar storage unit, surround camers.
D4 camera club
|
| 26th Jun 2012 5:55 pm |
|
|
bigjak
Member Since: 20 Jun 2012
Location: Sychdyn
Posts: 62
  
|
I did mine yesterday and thought it wasn't worth while documenting it because I thought mine was odd not having steps.
My advice is if you don't have a screwdriver socket to get the back two screws out you will need to take the wheel off. I couldn't get my cross head screwdriver socket to turn the screws and had to Dremel slot in them.
Overall the instructions are easy to follow and it is a bit of jiggling to get them on. I Dremeled the cut outs and that sped up the process of cutting the side covers.
|
| 26th Jun 2012 6:21 pm |
|
|
HOODIE
Member Since: 20 Feb 2011
Location: Great Notley
Posts: 77
 
|
I fitted sidesteps to my 12MY D4 a few weeks ago. Fiddly at times, especially refitting of cills once brackets had been fitted.
There is a video on YouTube that is worth watching - is for RRS but pretty much same as D4.
The cills are marked on rear with areas to be cut out to fit over brackets and I used a multitool - the vibrating saw/sander type - using a semi circular blade. Made this part quite easy.
To get screws out of rear wheel arch you can use a cross head bit in a small spanner or adjustable and avoid having to take the wheel off.
Once fitted they make a brilliant car look even better!! 
|
| 26th Jun 2012 8:06 pm |
|
|
Gazzad
Member Since: 14 Jun 2012
Location: Channel Islands
Posts: 18
|
DID IT!
I thought this morning that I would take off the sills cut the holes, put back on the car, and return to it tomorrow to finish the job.
Found it all very easy, and completed BOTH sides, with boards fitted in 2.75 hrs. Job done!
Now waiting for the resprayed spoiler from Dan, and that'll be put on next weekend hopefully.
|
| 28th Jun 2012 6:32 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO4.COM is independent and not affiliated to Land Rover.
