Member Since: 12 Apr 2009
Location: Leeds
Posts: 1155
Any idea what these spare cables are
I am almost done with the retro fit of the 3rd row seats and i have come across a few cables that are not connected to anything. Anyone any idea what they are.
Its a LHD car, and they are all on the LH side before rear side trim panel.
I spotted a twin earth lead with earth loop not connected to anything
its just in front of the parking sensor module
Click image to enlarge
Then looked further and found these wrapped up - rear entertainment maybe?
Click image to enlarge
This i suspect is 3rd row air curtain connector?
Click image to enlarge
What a job retrofitting the seats is. Need a rest by the end of it.
Thanks
Ian
23rd Dec 2012 11:32 am
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
1 & 2 are related ... There not rear seat entertainment .. But can't remember what there for ( I have them fitted in mine )
3 ... Yes airbag connectorG4 Gone ...but not forgotten
23rd Dec 2012 11:42 am
hids4u
Member Since: 12 Apr 2009
Location: Leeds
Posts: 1155
Thanks Adrian
So i can refit and not worry about the earth ? would be nice to know what it was
Trying to find a picture of the air bag - is it in the post or above roof lining?
r
ian
23rd Dec 2012 11:45 am
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
Curtain airbag would be above the roof liningG4 Gone ...but not forgotten
23rd Dec 2012 11:51 am
hids4u
Member Since: 12 Apr 2009
Location: Leeds
Posts: 1155
So you have them connected to something? could it be something to do with sat nav? i see an ecu behind the park assist ecu
23rd Dec 2012 12:08 pm
hids4u
Member Since: 12 Apr 2009
Location: Leeds
Posts: 1155
does anyone have a photo of the 3rd row seat belt with trim in place - i need to cut out something on the original trim but cant remember if there is a plastic cover that goes over the belt anchor point
23rd Dec 2012 12:10 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
hids4u wrote:
So you have them connected to something? could it be something to do with sat nav? i see an ecu behind the park assist ecu
That's not from my car ... It's Buellbeasts old D4
Sat nav is built into the screen ( on a hard drive ) . I have a HSE but don't have that module . He also had a HSE but an early press release car with pretty much every extra on .
Still trying to remember what he had that I don't G4 Gone ...but not forgotten
23rd Dec 2012 12:15 pm
hids4u
Member Since: 12 Apr 2009
Location: Leeds
Posts: 1155
Thanks Adrian.
Also curious what it is.
Mine has I thought most things except rear seat and working sat nav. Stated as pre wire for sat nav but it has USB iPod and 2012 screen. Maybe Andy will remember what his had.
Looks easy to retrofit for a change.
Best Regards Ian
23rd Dec 2012 2:25 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
If its a 2012MY then the hard drive for the nav goes in the head unit / cd slot unitG4 Gone ...but not forgotten
23rd Dec 2012 2:35 pm
hids4u
Member Since: 12 Apr 2009
Location: Leeds
Posts: 1155
its 12MY. Is it easy to check if the GPS aerial is there? while i have all the back stripped out
And is the hard disk unit separate or integral part of head unit. i thought it was built into the screen?
my faultmate and windows 7 playing up again so cant get it to give me hardware install list. though last time it worked it was showing in CCF that it had gps system. The local dealer nor land rover seem to know what is needed and what is fitted
23rd Dec 2012 3:13 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
It's defiantly not in the screen any more (was in first D4's with 6 speed )G4 Gone ...but not forgotten
23rd Dec 2012 3:41 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
GPS antenna will be on the high level break lightG4 Gone ...but not forgotten
23rd Dec 2012 3:45 pm
hids4u
Member Since: 12 Apr 2009
Location: Leeds
Posts: 1155
Thanks. Mines an odd one. As it has 6 speed yet still 12my
No keyless entry that I was expecting.
23rd Dec 2012 3:49 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
Easiest way is to see what software you have on nav screen ... Take a piccy of your home screen and I can tell youG4 Gone ...but not forgotten
23rd Dec 2012 3:52 pm
hids4u
Member Since: 12 Apr 2009
Location: Leeds
Posts: 1155
Click image to enlarge
Have you managed to do a scan of a D4? its not even on the option list and the D3 option didnt work
For some reason the MSV2 is working fine reading codes, settings etc, but when i read the CFF its all blank. Drives me in sane
running v1.30
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
? would be nice to know what it was
