Member Since: 24 Feb 2011
Location: Gloucestershire
Posts: 509
Resetting Window Closing
Problem
One window fails to close on global closing, or the one touch close fails.
Solution
With the engine running, doors closed, all windows up.
1. Push and hold down both the front window buttons on the drivers door. Continue to hold for a few seconds after the windows have completely opened.
2. Pull and hold the front window buttons until the windows have full raised. Hold for a few seconds after windows are closed.
3. Release the buttons.
4. Immediately pull the buttons up again and hold for 10 seconds.
5. You may hear a click during stage 4.
6. The windows should now be reset.
Worked on my driver side front window.D4 SDV6 HSE 11MY - Gone
D3 TDV6 HSE 08MY - Gone
25th Apr 2013 8:01 am
crews control
Member Since: 18 Mar 2007
Location: Dorset
Posts: 5011
Works on the rears too. On mine I can reset each window individually, I don't have to do both together.
25th Apr 2013 9:42 am
azurar01
Member Since: 24 Feb 2011
Location: Gloucestershire
Posts: 509
Good to know.D4 SDV6 HSE 11MY - Gone
D3 TDV6 HSE 08MY - Gone
25th Apr 2013 12:35 pm
roz
Member Since: 03 May 2013
Location: epping essex
Posts: 83
hi guys, is this window reset only for D4's or does it work on D3's as well, mine doesnt seem to have global closing, or if it does it dont work. that is if im doing it right!!
16th May 2013 3:43 pm
crews control
Member Since: 18 Mar 2007
Location: Dorset
Posts: 5011
I think the reset procedure works for D3 as well but I don't remember mine (MY05) having global closing... think that's a D4 thing.
16th May 2013 6:15 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
D3 dosent have global closing .. And early ones only had drivers one touch windowG4 Gone ...but not forgotten
16th May 2013 7:37 pm
Markie Boy
Member Since: 17 Jul 2012
Location: Essex
Posts: 83
I take it if u wanted to have passenger side one touch u can buy a drivers side switch & fit that to the passenger side??? D3 HSE Zermatt Silver
16th May 2013 7:42 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
Don't think the software is there .. But may be wrongG4 Gone ...but not forgotten
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum