wopac5
Member Since: 20 May 2007
Location: Karratha
Posts: 146
  
|
| Washer bottle replacement |
|
Hi All,
I have had reason to replace my washer bottle. The job is complete, but I wonder aboput the need to pull apart the front of the car...lights, grill, bumper etc, to acess 2 screws set into the rear of the housing that aree inaccessable from under the LHF gaurd.
Has anyone had one replaced? iIf so was there a need to pull apart the front, or are the screws accesssable thru the fog lamp hole?
Cheers
Tony
|
 20th May 2008 9:47 am |
|
|
IanB
Member Since: 10 Aug 2007
Location: Brisbane
Posts: 3
|
Hi Wopac5
Needed my washer bottle replaced after it sprung a leak (for no apparent reason). Anyway had it replaced at last service. And yes it basically required half the front to be removed to get access to the mountiing points. I've got the S model so no fog lamp holes but I climbed all over the front to see if I could do it at home but to no avail.
It is definitely a dealer service job
Ian -------------------------------------
Bucking' Blue 06 TDV6 S (with Air & T/R)
|
| 20th May 2008 11:34 am |
|
|
denny crane
Member Since: 29 Mar 2008
Location: Warwickshire
Posts: 147
  
|
There is a problem with the build of the washer bottle, causing most to eventually fail.
Supplier has fixed the problem and the bottles will be replaced when they go
|
| 20th May 2008 7:30 pm |
|
|
muppo
Member Since: 18 Dec 2007
Location: melbourne
Posts: 30
|
Had mine done inder warranty at the beginning of the year, 2hr job as the front bumper has to come completly off. Live it like it's your last!
|
| 29th May 2008 1:56 am |
|
|
