Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
I noticed on the Sale & Wanted section that the D4 will not accept a standard 18" wheel due to the increase in brake size. I was hoping to make a transition to a D4 in due course & had planned to take my 18" winter wheels with me. No doubt a number of D3 owners are planning the switch at some point but do we know what D3 wheels will also fit a D4?
I am staggered that a D4 does not take an 18" wheel - just how big are the new brakes!?
4th Jan 2011 5:55 pm
lee310
Member Since: 21 Jan 2011
Location: kent
Posts: 3
6th Feb 2011 4:05 pm
tomila10
Member Since: 06 Feb 2011
Location: poland
Posts: 3
Re: ebay wheels help
What tires for 20 inch wheels LR3?
6th Feb 2011 6:29 pm
Gazellio
Member Since: 08 Jan 2011
Location: Chilterns
Posts: 4130
I have a set of 5 19" FFRR Wheels for sale with very nearly new MTR's (One actually brand new).......
I too though that they fit fine
255/55 R19 Goodyear WRANGLER MT/R
Will be advertising soon
Last edited by Gazellio on 6th Feb 2011 6:51 pm. Edited 1 time in total
6th Feb 2011 6:49 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73121
gazellio wrote:
I too though that they fit fine
That combo fits D3 and facelifted D3s (some peeps call them D4s).
Click image to enlarge
C/o DiscoDad
Click image to enlarge
6th Feb 2011 6:51 pm
cedwat
Member Since: 16 Nov 2007
Location: North
Posts: 179
I am looking for 17" wheels for my Discovery 3. I would use them to put mud tires on.
i have found wheels from a recent Free-Lander and would like to know if they would fit ?
Here is what is written on the wheels : C#24c 6h521007 mo E-dot 75jx17 chet55 land rover
Picture :
My fifth Disco ...
13th Oct 2011 9:36 am
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18573
Freelander (1 or 2) wheels do not fit, the bolt hole configuration is different.
D3/4/RRS is 5x120 (5 bolts with their centres on a 120mm circle)
Fl2 is 5x108
Freelander 1 is 5x114.3506 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
13th Oct 2011 9:48 am
cedwat
Member Since: 16 Nov 2007
Location: North
Posts: 179
too bad. My quest will continue then ...
Thank you for your answer.My fifth Disco ...
13th Oct 2011 9:50 am
katodisco
Member Since: 04 Nov 2011
Location: Uphall, West Lothian
Posts: 5
I stupidly just bought a set of the 18" rr wheels pictured first on the list at the start of the thread. Other than the wheel nuts are different is there any other problems with the fitting? Wil these wheels fit with rr wheel nuts?
I bought them from eBay which stated in the advert they fitted a D 3. They came from a 2005 rr hse model allegedly Should have come here first me thinks..1985 LR90 for off road
Disco 3 for both
1978 Dolomite Sprint for fun
26th Nov 2011 3:55 pm
stevieh
Member Since: 22 Aug 2011
Location: Cumbernauld
Posts: 31
Just bought these
Hi folks
Just bought a new set of 19" rims and tyres that I thought were late Disco 3 or Disco 4, they are the ones in my gallery. The load rating is right and I'm sure I've seen them on Discos on the forecourt of the dealer...anyway looks like I might have bought RR ones instead as they fouled the front brake caliper ever so slightly.
I was thinking of adding a 5mm shim for clearance, any thoughts as to whether this is a good idea or not. Also if I add the shims will the studs stick out far enough to get the nuts on or should I go for the expensive 30mm wheel spacers with their own nuts?
PS I can't take them back as I bought them in Birmingham on a day out....doh!
Thanks
Click image to enlarge
[img][/img]
27th Nov 2011 11:47 pm
Cam-Tech-Craig
Member Since: 24 Feb 2012
Location: Gloucestershire
Posts: 419
Just a quick note for you chaps looking at FFRR wheels, if you look between the bolt holes you will find either a dimple or a hole... If they have small holes they are early (pre <06>) wheels (Jag fitment) and post 06> wheels take the larger wheelnuts (the same as the D3)
Hope that helps
Craig 15.5MY XS in Corris Grey with Black & Almond leather
19th Dec 2012 12:03 am
irl32
Member Since: 27 Aug 2009
Location: Co Mayo
Posts: 66
Hello To All, I need some wheel advice, I am looking at a set of y spoke alloys off a 2007 Range Rover, will they fit my 2006 disco3 ????
9th Feb 2013 1:47 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73121
Sounds like RRS (not a real RR inspite of the badges) HSE alloys, straight fit on a D3.
PS Like these:
Or
Click image to enlarge
????
9th Feb 2013 1:51 pm
irl32
Member Since: 27 Aug 2009
Location: Co Mayo
Posts: 66
Thats them,second photo, thanks for the quick reply, will go ahead with the deal.
Keep her between the ditches.
Safe Driving to all
9th Feb 2013 2:56 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73121
Yep, deffo straight fit, good few peeps here use them, they might have a pic.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Should have come here first me thinks..
