Charging through towing socket

From DISCO4.COM Knowledge Base
Revision as of 10:56, 7 November 2012 by Martin (talk | contribs)
Jump to: navigation, search

Introduction

Rather than lifting the bonnet and removing the battery cover, vehicles can be charged using the tow electric socket, if you have either twin 12N/S electrics (with two 7 pin sockets) or the newer 13 pin socket.

The wiring between the 12V positive pin below and the battery is fused on the vehicle but it is recommended to add an additional fuse in your electrics wiring for maximum safety. Choose a fuse with a rating a little over the maximum output of your charger.

Pinout

12S

The 12S socket is the older type 'caravan' socket with the white cover:

wiki1_CIMG3747.JPG wiki1_12%20pin.jpg

Pin 3 Ground (Negative)
Pin 4 12V (Positive)

13 Pin

wiki1_tow1.jpg wiki1_13%20pin.jpg

Pin 9 12V (Positive)
Pin 13 Ground (Negative)