Member Since: 24 Aug 2013
Location: In The Mud
Posts: 431
Picture / Drawing Required
Hello,
Would anyone have a picture or drawing of part number YPC800230 they could post up please?
Kind regards
Jay
4th Mar 2014 7:10 pm
Hairy Dan
Member Since: 19 Jan 2011
Location: Co. Durham
Posts: 12319
Not too much help but this is the picture from Microcat
Cheers Ian
--------------------
Club N.E.R.D.S
Kielder 4x4 Safari
Discoless
4th Mar 2014 7:36 pm
Allan_T
Member Since: 10 Sep 2012
Location: Northampton
Posts: 1034
http://www.brit-car.co.uk/product.php/1991...or___cableGAP IID Pro Multi Vehicle Defender L316 2007-2015 - Discovery 3 - Discovery 4 - Discovery Sport L550 - Freelander 2 - Range Rover Evoque L538 - Range Rover L322 - Range Rover L405 - Range Rover Sport L320 - Range Rover Sport L494 Electrical Fault Diagnostics
4th Mar 2014 7:43 pm
UKJay
Member Since: 24 Aug 2013
Location: In The Mud
Posts: 431
Hairy Dan wrote:
Not too much help but this is the picture from Microcat
Thanks Hairy Dan
That does look like the top of the rear air block wiring harness connector. Does the Microcat show another angle, or say what that fitting connects too just to be sure it is for tge air valve block?
Kind regards
Jay
4th Mar 2014 8:01 pm
UKJay
Member Since: 24 Aug 2013
Location: In The Mud
Posts: 431
I am after a visual so that I get the right fitting for the wiring loom. I did check numerous sites for a photo, but unfortunately all sites have none, similar to the one linked to.
Thanks anyway,
Jay
4th Mar 2014 8:04 pm
Hairy Dan
Member Since: 19 Jan 2011
Location: Co. Durham
Posts: 12319
Jay that's the only drawing and it just lists it as connector - various places so doesn't give a specific use for itCheers Ian
--------------------
Club N.E.R.D.S
Kielder 4x4 Safari
Discoless
4th Mar 2014 8:07 pm
UKJay
Member Since: 24 Aug 2013
Location: In The Mud
Posts: 431
Thanks very much Hairy Dan,
I will simply order one then as the price is not prohibitive, then I will know.
Kind regards
Jay
4th Mar 2014 8:16 pm
Allan_T
Member Since: 10 Sep 2012
Location: Northampton
Posts: 1034
I've uploaded the connector location and description.
http://www.disco3.co.uk/gallery/albums/use..._C2101.pdfGAP IID Pro Multi Vehicle Defender L316 2007-2015 - Discovery 3 - Discovery 4 - Discovery Sport L550 - Freelander 2 - Range Rover Evoque L538 - Range Rover L322 - Range Rover L405 - Range Rover Sport L320 - Range Rover Sport L494 Electrical Fault Diagnostics
4th Mar 2014 11:01 pm
UKJay
Member Since: 24 Aug 2013
Location: In The Mud
Posts: 431
Hi Allan,
That document is exactly what I was looking for, so your uploading it is appreciated greatly. May I ask where it is from?
Incidentally I just ordered a couple today from LR, so it is nice to know the part should be correct
So thanks again to everyone who has helped out here.
Kind regards
Jay
5th Mar 2014 6:54 pm
Allan_T
Member Since: 10 Sep 2012
Location: Northampton
Posts: 1034
The document came from TOPIx http://www.landrovertechinfo.comGAP IID Pro Multi Vehicle Defender L316 2007-2015 - Discovery 3 - Discovery 4 - Discovery Sport L550 - Freelander 2 - Range Rover Evoque L538 - Range Rover L322 - Range Rover L405 - Range Rover Sport L320 - Range Rover Sport L494 Electrical Fault Diagnostics
5th Mar 2014 7:11 pm
UKJay
Member Since: 24 Aug 2013
Location: In The Mud
Posts: 431
Thanks Allan,
Just to ask - how much is the subscription, and can anyone subscribe?
Jay
5th Mar 2014 7:18 pm
Allan_T
Member Since: 10 Sep 2012
Location: Northampton
Posts: 1034
The subscription cost varies but you can purchase a 24 hr subscription like I did and spend a few hours downloading the info you need.
A single model L319, 1 day subscription costs £16.80GAP IID Pro Multi Vehicle Defender L316 2007-2015 - Discovery 3 - Discovery 4 - Discovery Sport L550 - Freelander 2 - Range Rover Evoque L538 - Range Rover L322 - Range Rover L405 - Range Rover Sport L320 - Range Rover Sport L494 Electrical Fault Diagnostics
5th Mar 2014 7:47 pm
UKJay
Member Since: 24 Aug 2013
Location: In The Mud
Posts: 431
Thanks again for your time, I will be looking to get on the site to see what other marvels is on there. Maybe there is a workshop manual hiding away
Regds
Jay
6th Mar 2014 7:16 am
thorgal
Member Since: 26 Nov 2008
Location: on the east side
Posts: 541
Good morning all.
I know I am resurrecting an old post but I would love to know how to de pin this particular connector from wires on the back..I have purchased two of these from AB and have to replace one in the front valve block harness as the orange rubber seal broke inside, rendering the connector useless, unless somebody knows how to remove inner white plug and remove just the seal.That would be very helpful as I don't want to break anything. Cheers!
23rd Jul 2021 2:32 pm
thorgal
Member Since: 26 Nov 2008
Location: on the east side
Posts: 541
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
