But you're not. You're jacking one wishbone by just enough to get that wheel a couple of inches off the ground. The car doesn't move or lift at all.I know it's not considered "kind" to say no these days, but no. Just no, ok? And if it's not ok, still no.
27th Mar 2008 3:16 pm
SN
Member Since: 03 Jan 2006
Location: Romiley
Posts: 13710
iconix wrote:
Just bought this SIP 3 ton one on eBay for £45 & £15 P&P. Very heavy, but has a solid rubber mounting pad - anyone know how good these are?
Hmmm - it would appear that's what I bought at CostCo in December....
Click image to enlarge
Not ACTUALLY tried it yet Steve N | 21MY Defender | 08MY Discovery 3 (history) | 06MY Discovery 3 (ancient history)
27th Mar 2008 3:17 pm
simon
Member Since: 11 Jan 2005
Location: Shropshire
Posts: 18296
NoDo$h wrote:
But you're not. You're jacking one wishbone by just enough to get that wheel a couple of inches off the ground. The car doesn't move or lift at all.
But the weight of that corner of the D3 is being held... so still pretty heavy for that amount of metal ?
If we were to presume each wheel carries an equal amount of weight then we're looking at about .7t per corner. All well within the capacity of the jacks, but is it within the ability of the wishbones? I would think yes, as the cars bottom out from time to time and I've yet to see a crushed wishbone while offroading.
I take on board the concerns about locating the jack carefully, but that applies no matter what you jack with or where. I also understand people not being keen on doing this, but personally I'm happy to jack at the wishbones where I'm only raising the wheel by an inch or so. To minimise movement I do this with the vehicle in access height with the tailgate or a door open and the key out of the ignition. Wouldn't be keen on doing it with the car at normal or offroad heights as there is more scope for the wishbone to move, and would only do it on sound, level ground.
Horses for courses. Silver or Black? Tinted or plain? 17s or 19s? Auto or Manual?
There are safety implications if you get it wrong and I wouldn't be too keen on someone who's never lifted a D3 with the normal jack rushing out with a handful of coins and trying this with the first trolley jack they've ever used. But if you've jacked cars of all shapes and sizes by various means in the past and are familiar and comforable with trolley jacks then why not? I only use this approach when changing wheels and certainly wouldn't use it when looking to work under the car for any reason. That's when the takla and axle stands come out.
Confession time. Having rolled my car off an airjack last year because I didn't adequately chock the wheels I know I'm no paragon of Health and Safety best practice, so my decision to use this method of lifting shouldn't be taken as any kind of recommendation for others to do it.I know it's not considered "kind" to say no these days, but no. Just no, ok? And if it's not ok, still no.
The concave spot on the wishbone if strong enough could be a good trolley jack location .
Click image to enlarge
A domed ( semi spherical ) piece of steel welded to the trolley jack pad could use this as a location, the shape will allow rotation of the wishbone as it is lifted - good or bad idea ?
"I know that you believe that you understood what you think I said, but I am not sure you realize that what you read is not what I meant"
27th Mar 2008 10:12 pm
Popelka
Member Since: 31 May 2008
Location: Praha (Prague)
Posts: 2430
Quote:
If we were to presume each wheel carries an equal amount of weight then we're looking at about .7t per corner. All well within the capacity of the jacks, but is it within the ability of the wishbones? I would think yes, as the cars bottom out from time to time and I've yet to see a crushed wishbone while offroading.
following on from this surely if using the wishbone as the lift point you would only be replacing the support the wheel gives; with the jack (which ever used).
The car sit on 4xwheels so the weight and stress of 2.7T is still shared across 4xpoints. and if it's just for wheel changes couldnt do harm, any other type of work would of coarse need consideration how individuals approach what ever they are trying to do.
sorry I'll go fix my skoda
I have 4x4 diesel car and last winter managed to ram it up onto a small snowdift, when I tried to reverse one of the back wheels just span the power away. would it have been possible to use handbrake to lock the rear wheels and use the power thru the front wheels?? Experience is a difficult teacher, because she gives the test first and then the lesson afterwards!!!!
29th Jul 2008 4:36 pm
Mr.Hamster
Member Since: 07 Jun 2008
Location: Brisbane
Posts: 57
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum