HughMartin
Member Since: 30 Mar 2008
Location: Aberdeenshire
Posts: 751
  
|
The other evening I found a thread which included photos of how to strip down the FBH and clean it.
I have just spent an hour trying to find it again ! Can anyone point me in the right direction ?
|
 4th Dec 2012 9:00 pm |
|
|
sopjas
Member Since: 30 Dec 2008
Location: Its never Dull in Hull
Posts: 280
  
|
If you are stripping to clean because you are having problems with it not starting then you may be wasting your time, I have stripped mine recently and cleaned but am still having problems! 
I have found that it is a fuel feed problem or air leak, try removing the fuel feed pipe then starting the fbh until the fuel starts pumping/flowing (low pressure) then put pipe back onto fbh it should start! 
I have also found that their is a connection on the fuel pipe about 12 inch below the fbh where i can clearly see a mist of fuel, this is my next task to sort as this may be the problem.
If you still want to strip it the goole search thermo top v and their is a full webasto manual available with stripdown instructions, if you cant find it send me your email address and i will forward one to you!
or remove the  thing and throw it away like I am tempted to do  'Just because you're breathing doesn't mean you're alive'
Buckingham blue, Webast timer/remote, AT2s, Black & Silver ovals ,
Privacy Glass , Drilled and Groved Discs , Xenons, Rear LED's , Light Guards,Hawkeye diagnostic unit.
TL1000R--XR600R--
|
| 4th Dec 2012 10:35 pm |
|
|
mike23118
Member Since: 01 Oct 2010
Location: North Wales
Posts: 1028
 
|
My FBH fuel pipe was blocked at the tank, so detached from fbh pump and blew down it , cleared obstruction and been OK ever since
|
| 5th Dec 2012 6:31 am |
|
|
