A Bar Types

From DISCO4.COM Knowledge Base
Jump to: navigation, search

There are 2 variants of A-bar, depending on whether you have the LR accessory winch kit fitted (although the with-winch variant can be fitted to vehicles without the winch).

The design and method of attachment of both variants also changed in around 2008. The earlier type bolts back to the front crossmember, the later type bolts down to it.

All Variants

A Bar Part Number Lower Fixing Version Fitting Instructions
VUB501210 Bolt Back Non Winch pdf_32.png
VUB501230 Bolt Back With Winch pdf_32.png
LR005237 Bolt Down Non Winch pdf_32.png
LR005743 Bolt Down With Winch pdf_32.png

Identifying an A-bar

Basic variant

Look for the presence of the lowermost cross bar (which the numberplate would mount to):

Non Winch   With Winch
wiki1_A-BAR-NO-WINCH.gif   wiki1_A-BAR-WINCH.gif
With Lower Cross Bar Without Lower Cross Bar

Type

Look for the presence of 2 holes at the bottom of each vertical bar:

wiki1_a-bar-holes.jpg

If your A Bar has these holes on the front face you have a "Bolt Back" (VUB5012xx) or earlier type. Bars without these four holes are "Bolt Down" (LR005xxx) or later type.