Member Since: 04 Jul 2008
Location: In A World of My Own!
Posts: 2892
Protecting Spare
I am going to swap my std spare for a full size alloy, but have seen all of the posts re the scallys nicking the spares by cutting the cable.
Just wondered if anyone had come up with a protector for the cable to stop the scrotes from getting to it.
Didnt want to tax the grey matter if someone had a design that works!!
Must stop buying shiny toys....
15th Oct 2008 10:10 am
busaboy74
Member Since: 17 Aug 2008
Location: Hampshire
Posts: 310
Thinking of moving my spare onto a rear carrier with locking wheel nuts, that should stop them.
15th Oct 2008 10:24 am
darrind
Member Since: 04 Jul 2008
Location: In A World of My Own!
Posts: 2892
tends to make the job fairly expensive though does look good, and far more practical to get to than grovelling around to get to the spare.
Must stop buying shiny toys....
15th Oct 2008 11:15 am
al cope
Member Since: 08 Nov 2005
Location: Oldbury, WM
Posts: 10354
just make sure when you wind the spare up, that one of the wheel spokes is over/covering the cable, that way you shouldnt be able to cut it. If you leave it visible through the spokes, then it can be got at.
AlVolvo XC90 B5 Plus Dark
Gone - MY18 D5 HSE - Corris on 22's with Black Pack
Now gone - MY16 D4 SE Tech, Loire Blue, Almond Leather, Privacy, plus some other goodies.
Old - MY12 D4 SDV6 XS Auto - Ipanema Sand with Almond Leather - Plus other niceties, and D4.com sticker
Older - D3 TDV6 XS Auto - Lugano Teal with Almond Leather, 20" Stormers, Shiny Tailpipes, DVD/TV - and obligatory D3 sticker
Ancient - D3 TDV6 S - Tonga with Ebony, 20" Stormers, satnav & DVD
15th Oct 2008 4:22 pm
darrind
Member Since: 04 Jul 2008
Location: In A World of My Own!
Posts: 2892
Thanks Al
What I was thinking was something that effectively stopped all access to the mechanism without having to worry about the position of the spokes, as the RRS alloys on mine have lots of gaps unlike the D3 ones.
Almost like the hard covers that can go over the spare rim on the back of most 4x4s, with some kind of lock mechanism - meaning you would have to lower the spare before you could access the lock and then remove the cover.
Basically to reduce the ease of theft, and also protect the tyre and rim from the elements.Must stop buying shiny toys....
15th Oct 2008 5:10 pm
MacLeod 313
Member Since: 18 Apr 2008
Location: away
Posts: 10723
darrind also contact Nick ABS plastic cover for the wheel, keeps it out of eyesight too. Tis in my Gallery, lots of guys on here have one....
I changed the sticker now to a reflective forum one now
15th Oct 2008 5:18 pm
scoopnick
Member Since: 16 Oct 2008
Location: Dronfield
Posts: 4
Just to let you guys know that I've bought an 'Undercover' Commercial name removed
It's a fantastic bit of kit and cost me less than £30 on ebay! It's easy to fit and keeps your wheel and tyre clean.
Check out the following link: Link removed
Those covers seem to be available from one or two places including some main dealers. Two designs and a previous post hinted that one fitted much better than the other.
Just a thought, you are not connected to the company by any chance are you ? Just that you only live up the road from the company you popped an link in for "To finish first, one first has to finish ...."
16th Oct 2008 9:53 am
Gareth Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26775
Welcome Scoopnick.
If you are connected with the company involved, then there are sponsorship oportunities here, please read the commercial post rules.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
