Member Since: 15 Sep 2021
Location: Durham
Posts: 92
the screen only lights up with the ignition on wont light up on acc.
radio comes on with acc but no sound.
23rd Sep 2021 9:16 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10360
R1wilky wrote:
Would that stop the radio volume work if the ignition is not on
If the display hasn’t powered up, it will stop the volume
23rd Sep 2021 9:47 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10360
You need to check where you connect the green wire. It must goto the correct place. The fuse I listed.
And if not that, the purply one
23rd Sep 2021 9:49 pm
R1wilky
Member Since: 15 Sep 2021
Location: Durham
Posts: 92
Picture one ignition on all on
Picture two ignition off no sound
Picture 3 keys out
Picture four no keys radio on no sound
24th Sep 2021 6:09 pm
R1wilky
Member Since: 15 Sep 2021
Location: Durham
Posts: 92
On a plus got the ax back working plug in centre of control panel hadn't lock in fully.
24th Sep 2021 7:03 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10360
Pete K wrote:
You need to check where you connect the green wire. It must goto the correct place. The fuse 56
And if not that, the purply one
With radio on, and ignition off, check fuse 56 is live.
And your green or blue wire to display has 12v
24th Sep 2021 7:25 pm
R1wilky
Member Since: 15 Sep 2021
Location: Durham
Posts: 92
Purple 12v+ all the time.
Green / blue only live with ignition on.
25th Sep 2021 3:48 pm
R1wilky
Member Since: 15 Sep 2021
Location: Durham
Posts: 92
Do you think I’ll have to get it through the ccf.
No keys in turn radio on nav drive boots up you can hear it
25th Sep 2021 6:42 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10360
Green blue should go live when you unlock the car or turn the radio on by pressing the knob.
Its not connected to the right place.
Sounds like the dvd drive is connected to the correct place.
No I don’t think it’s a Ccf issue
25th Sep 2021 7:14 pm
R1wilky
Member Since: 15 Sep 2021
Location: Durham
Posts: 92
Fuse 56 is head light ajuster in my fuse box
25th Sep 2021 7:49 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10360
arh sorry. 56 is ignition, so that explains it !
fuse 58 is the one you want. I have it correct, in some parts of this thread
25th Sep 2021 9:43 pm
R1wilky
Member Since: 15 Sep 2021
Location: Durham
Posts: 92
Sorted I swapped it over at 12.30 last night and it's spot on now thanks again.
In three rear upper door there's a red unit with a fakra lead but no power lead were will I find this out.
26th Sep 2021 7:11 am
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10360
What are you upto now?
All them coloured boxes are powered from the same place.
The blue wire, which ends up at fuse 58 !!!
So just take a feed from the nearest coloured Antenna box.
into pin 1 of the 3 pin connector I believe.
They are grounded by the mounting bolt.
26th Sep 2021 9:58 am
R1wilky
Member Since: 15 Sep 2021
Location: Durham
Posts: 92
When I stripped the hse front to back I took everything out all boxes but no feed in loom for red one.
On diagnostics it says parameters not configured??.
26th Sep 2021 1:01 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10360
Dunno what the red one does.
If there isn’t a coax, coloured fakra cable connected to it, it’s not going to do anything though
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
