Member Since: 11 Oct 2012
Location: Rochdale
Posts: 1180
I dont really have a relationship with a LR dealer, most of my work has been done my specialist or myself so I doubt they would help.2010 Disco 4 HSE
- Digital Dash Club
- GAP BT IID
28th Aug 2018 7:34 am
DiscoJeffster
Member Since: 27 Feb 2016
Location: Perth
Posts: 204
So my RHS inlet manifold went at 100k miles. Now the LHS has failed at 160k miles, so managed a bit longer than normal on the second.
Have ordered the parts and I’m going to DIY it.
30th Oct 2018 11:37 pm
Sklett
Member Since: 18 Jun 2019
Location: Norway
Posts: 1
So. Noe mine just cracked. Dealer says IT may be a body of repair? Any HAF to do that?☹️
18th Jun 2019 5:53 pm
dgardel
Member Since: 03 Nov 2009
Location: Greater Venice
Posts: 2025
No, it’s not a body-off jobDiscovery 5 tdv6 HSE Corris Gray Outback Engineering Limited Edition
IID Pro MV License
18th Jun 2019 7:46 pm
IainMac82
Member Since: 20 Jun 2018
Location: S36 7JA
Posts: 81
After the odd 'restricted performance' message, I've had it confirmed by my independent garage after doing a smoke test that the inlet manifold is indeed cracked.
They've quoted for the labour, which reading this thread seems reasonable, but I have choice between OEM parts @ £270ish per side, or aftermarket for approx £150 per side.
Should I be sticking to OEM or is aftermarket OK?
Thanks
17th Dec 2020 6:28 pm
Gareth Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26769
The OEM haven’t exactly got a good service record have they!
17th Dec 2020 8:28 pm
IainMac82
Member Since: 20 Jun 2018
Location: S36 7JA
Posts: 81
The Land Rover part number has been updated over the years. I don’t know whether that means they have addressed the underlying issue with a new design. I also don’t know what the fitment and quality is like on the aftermarket parts, or whether they suffer from the same problem.
If anyone has experience or a recommendation with explanation then please share?
18th Dec 2020 6:50 am
IainMac82
Member Since: 20 Jun 2018
Location: S36 7JA
Posts: 81
BUMP - can anyone provide some guidance on my question? Replace cracked inlet manifold with OEM or aftermarket part?
4th Jan 2021 11:11 am
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20835
OEM/Genuine only, IMHO
Its a lot of work to replace, so last thing you want to do, is do it again My D3 Build Thread
Member Since: 16 Jan 2020
Location: East/West Sussex Coast Borders
Posts: 1200
I was assured that the new part numbers represented the fact that the problem (the joining of 2 different thickness plastics) had been addressed, and so it was a no brainer, LR parts for me.
As Disco_Mikey says, you don't want to have to do it again when what could be quality copies of the original items fail.
Dave2011 Discovery 4 Commercial SDV6 (Gone)
2010 RRS TDV8 (Gone)
1980 OBLIC 4.0ltr Range Rover (went a long time ago)
4th Jan 2021 11:42 am
Shelley71
Member Since: 23 Sep 2016
Location: Southampton
Posts: 37
Ok, so i'm a wee bit clueless! but the technical bulletin LTB00768v2 3.0L TDV6 Valve Cover Split And/Or Cracked, is obviously related to the TDV6; Does anyone know if there's one for the SDV6?
The Disco curse strikes again!
10th Mar 2021 5:35 pm
Lrstaylor
Member Since: 03 Oct 2018
Location: Kent
Posts: 615
My mates done a few of those now the last one had been to the md x3 times and they still couldnt find the fault bless them.
10th Mar 2021 5:49 pm
robpenrose
Member Since: 12 Jan 2016
Location: Surrey / SW London
Posts: 2138
Shelley71 wrote:
Ok, so i'm a wee bit clueless! but the technical bulletin LTB00768v2 3.0L TDV6 Valve Cover Split And/Or Cracked, is obviously related to the TDV6; Does anyone know if there's one for the SDV6?
The Disco curse strikes again!
The 3.0l TDV6 & SDV6 are the same engine, they just changed the badging
Current: D4 HSE
Previous: BMW Z4M Coupe
Previous: Land Rover Defender 90 CSW Td5
Previous: Land Rover Discovery Td5 ES
11th Mar 2021 7:10 am
Shelley71
Member Since: 23 Sep 2016
Location: Southampton
Posts: 37
thats what i thought but didn't want to pipe up and say incase i was totally wrong lol
11th Mar 2021 3:30 pm
Barker44
Member Since: 22 May 2020
Location: North Wales
Posts: 16
Genuine or aftermarket
so my Passenger side (left) mnifild has just gone, cant get 10 miles down the road without limp mode coming on.
now iv been on the LR website and they list aftermarket and genuine. Whats everyones take? has 2 years warranty.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum