Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18563
Site bug which I am tracking down06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
7th Dec 2017 9:15 am
TD5 Ibex
Member Since: 03 Aug 2014
Location: Shropshire
Posts: 5
7th Dec 2017 9:25 am
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18563
Fixed06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
7th Dec 2017 9:56 am
rockcrawler
Member Since: 31 Oct 2012
Location: Ferring
Posts: 2884
Does anyone have a link as to where i can get the ceramic chamber gasket as mine just disintegratedD3 Metropolis Bonatti Grey-Alpaca Leather-adaptive headlights-fridge-EGR blanking kit-Harmen Karden-Cruise-4x4 info enabled-Tinted Windows-Heated F&R Seats-Rosen rear Entertainment-LED'S everywhere -Smoked Side Repeaters-Rear Aircon-Vredestein Wintrac 4 Extreme-Puddle and Footwell Lamps-Stainless Steel Side Protection Tubes- NEW ASHTRAY ( thanks to dsd1036 )
Club BAS Remote FBH
Club MXS10 Ctek
Club Beanie Grill
Rear D4 Lamps
Geoff Gearbox Flush
BAS Remap
7th Dec 2017 1:19 pm
fino
Member Since: 28 Feb 2014
Location: Middlesex/ Surrey
Posts: 163
Serviced mine yesterday, thanks Robbie
Make sure the two stub coolant pipes are seated flush before screwing down the metal plate otherwise you'll get a leak and have to take it off again
Primed ok, tested got the E7 code but still works when I use the 3rd button on key fob (have a home-made fbh controller, though not made by me).
Frosty this morning and happy its all working again.
17th Dec 2017 1:52 pm
Antjp
Member Since: 09 Aug 2013
Location: Warringon
Posts: 349
how does the fbh draw its fuel, is it pumped from the tank or sucked by the the fbh. Mine has gone down and I'm suspicious its fuel related.
Webasto controler fitted disconnected from can-bus
Several 20 minutes Fuse removal reset tried.
Ticking sound for approx 10 seconds coming from fbh when engaged but no smoke.
Ps. I've just found myself a page on the forum with mention of a solonoid plunger pump under the car drivers seat side. When it gets back home I will take a look.
Just serviced mine there was a lot of spot in the chamber and it was struggling to get the coolant warm on s cold day all back together but she is smoking like a good in, here are a few pics of it apart does everything look ok
Range Rover Westminster 4.4 TDV8 what a car
Discovery 3 HSE 2006 gone but never forgotten
Member of the 234,567 mile club😎
5th Jan 2018 12:53 pm
Iceman08
Member Since: 22 Sep 2014
Location: Hereford
Posts: 2284
Quick question.........how do you remove the FBH from the silver bracket with it in situ?
I can't get at two torx screws as the coolant bottle is in the way
Take headlight out I pulled the washer bottle neck out of the way lift up coolant bottle it will pull out of its clips then push to the left and undo the screws from the headlight opening, hope this helpsRange Rover Westminster 4.4 TDV8 what a car
Discovery 3 HSE 2006 gone but never forgotten
Member of the 234,567 mile club😎
19th Jan 2018 4:06 pm
Iceman08
Member Since: 22 Sep 2014
Location: Hereford
Posts: 2284
That's a great help, thank you
19th Jan 2018 5:59 pm
G_Cam
Member Since: 12 Aug 2010
Location: Fife
Posts: 2061
One thing to add (a cautionary Tale)
and One Question (by way of Clarity that may help others)
BEWARE - The 12v Plug... If you do not apply pressure in the right way ie leaver down it may do this!
The plug housing/leverage point on mine was broken and I thought that I had actually un-clipped it... I hadn't!
Click image to enlarge
Click image to enlarge
The Next one is a QUESTION:
I know the ceramic is split at the bottom of the glow-plug..
Does this make the whole thing non-operational?
Can you buy a replacement OR a replacement Chamber?
Click image to enlarge
Click image to enlarge
Thanks1 TR6 Rusting away quietly
1 FARR UTV SOLD
1 International Harvester SOLD
7 x D3 all SOLD
2 x D4 both SOLD
1 x Mrs D4 'Panther' SOLD
1 x Outlander van SOLD
1 continual stream of car parts and me living in the garage...
20th Jan 2018 9:29 pm
discoverylu
Member Since: 09 Aug 2014
Location: Wilwerwiltz
Posts: 1
FBH part number LR066870
Hi to everyone
First of all thanks to Robbie for his dedicated time of making this step by step guide
I've read all the post and I've identified the thread, as my FBH start remotely with a remote control and after 2/4 minutes it stops .
As LR dealer diagnostics it simple, this one is broken and you need a new one at 1000 euros plus taxes and of course plus labour of getting out and getting in the new one.
But I wasn't sure confidence of that and once again the answer is in this beloved forum.
My questions is :
I own a D4 2010 with the FBH Webasto part number LR066870, so is the same model for the serving guide described by Robbie?
Since my FBH have remote control, and once I do the cleaning describe above, I need to reprogram the remote control ?
With my FBH pull out can the D4 runs without that or the vehicle must stay stop until the job is done ?
Once again thanks to all of you for your bellowed answers to my questions
Best regards
Rui MeloD4 HSE 3.0 2010 ( actually on )
D3 HSE 2.7 2009 ( gonne on an crash accident)
LR Def 130 Td5 2005 ( The best one always bellowed and never forget)
LR Def 90 Td5 2003 ( a must-have it in LR world )
LR Discovery 2 Td5 2003 ( Borrowed to my wife and I could never touch him again)
LR Def 300 Tdi 1994 ( The real classic)
LR Discovery 1 300 Tdi 1994 ( the start of a long adventure)
9th Feb 2018 10:46 am
zinke
Member Since: 22 Feb 2014
Location: Scunthorpe
Posts: 584
The guide is the same for your heater
You don’t need to re program anything after
If you buy the 90 degree joiner as said in this post somewhere you can join the water pipes and run he vehicle without the heater fitted as long as you remove the fuse and blank the fuel pipe off.
Pete.IID, webasto software and workshop facility's available.
9th Feb 2018 1:39 pm
hergum
Member Since: 10 Aug 2017
Location: Vestlandet
Posts: 2
Faulty PCB
Just thought I would chime in with another failure mode.
My FBH would not start, and WTT told me the issues was "glow plug / flame monitor has short circuit to ground". I swapped out the glow plug for a know good one, which changed nothing. Then the circulation pump, as the internet said it might be a good idea.
Finally I swapped the PCB - which cured it!
17th Feb 2020 7:19 am
Bizbauer
Member Since: 07 Oct 2014
Location: Edinburgh
Posts: 100
Post service coolant leak
Tore down and serviced my fbh yesterday thanks to Robbie's fantastic instructions. It was very full of soot; don't think it had been looked at since new in 2006!
Put it all back together, reinstalled it and ran the webasto program to prime it and run it which all worked lovely! Burning beautifully and clean now.
BUT (!)
Noticed some coolant leak from where to two halves split.
I did not see Robbie give any torque values for the three bolts that hold the two sides together; can anyone advise? I made sure the new gasket was seated ok afaik...
Might there be any other reason for the leak?
'06 D3 TDV6 S Cairns Blue
Altox, D4 BT module
V8 Brake kit
Beanie Grille
'11 KTM 990SM-T
'01 Saab 9-5 Aero
Previous: '05 Freelander 1 HSE, Zambezi Silver
'97 Freelander 1.8, Black
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
