Member Since: 19 Jan 2016
Location: Chichester
Posts: 30
Yes all the same like for like pulleys.
I've tried that disco Mikey , the tensioner is hard to hold back to remove the belt but maybe not strong enough to keep it at the right tension ?
I think all the belts are the same size with 8 ribs. The belt I'm using was removed from the blown up engine so I think a new one is in order just I case it had stretched in some way ??
29th Mar 2016 7:38 pm
Soldierboy
Member Since: 27 Jan 2016
Location: Sheffield
Posts: 728
Could be and idea to remove the belts start it up for a second and switch straight off! ( i know this isn't good practice) but that will eliminate the belts if it stops if not it could be bearings in the fan pulleys ect just a thoughtGod created heavy armour on 06 sept 1916, on the 7th the devil stood to attention!
Fuji white D4 MY11 GS 3.0 SDV6 MODS:
SMD LEDS INSIDE, SIDE LIGHTS, REAR FOG AND REVERSE
OEM SIDE STEPS
STAINLESS STEEL SCUFF PLATES
RUBBER MATS
SHORT ROOF BARS
RETROFITTED CC
BLACK HUBS & DUST CAPS
GLOSS BLACK GRILLE, SIDE VENTS AND WHEELS
BLACK BADGES FRONT REAR AND STEERING WHEEL
MUD GUARDS FRONT AND REAR
GLOSS BLACK DOOR HANDLES AND LETTERING
29th Mar 2016 7:44 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20841
Member Since: 19 Jan 2016
Location: Chichester
Posts: 30
Mines a lot stronger then that Mike. I struggled to hold it back while trying to slip the belt on. Took me 3 attempts
29th Mar 2016 9:00 pm
Maxarn58
Member Since: 24 Dec 2011
Location: Sollentuna, north of Stockholm
Posts: 225
Lee, did it resolve the issue?
I had a similar problem, with an awful sqealing
as soon as I touched the steeringwheel.
In my case, it was a matter of wrongly routed
belt.
After consulting the manual, I routed it correctly,
and the squeal disappeared.
Rgds
UffeRRS MY2006 HST
As a rule, I always resist temptations,
unless they are irresistible!!
30th Mar 2016 7:09 pm
Lee333
Member Since: 19 Jan 2016
Location: Chichester
Posts: 30
I've changed the belt and tensioner today still the same.
Has anyone got a diagram of the belt route ?
If I've done it wrong I'm going to kick myself stupid. Also got a puncture today.
Been a great week so far
30th Mar 2016 7:43 pm
JMack
Member Since: 02 Aug 2014
Location: Edinburgh
Posts: 1517
Any use?
Click image to enlarge
(taken from another thread)
30th Mar 2016 8:27 pm
Lee333
Member Since: 19 Jan 2016
Location: Chichester
Posts: 30
That's how I've routed mine.
I'm at a loss with it now.
Maybe a trip to the stealers to see if they can diagnose
30th Mar 2016 9:15 pm
Lee333
Member Since: 19 Jan 2016
Location: Chichester
Posts: 30
After a long drive today the squeak also happens on the front when going over a speed bump.
On the up and down ???
Any ideas ???
31st Mar 2016 7:34 pm
PeterTh
Member Since: 06 Sep 2013
Location: Alunda
Posts: 330
I have exactly the same symptoms as you do. I suspect it might be the upper arms as the lower ones are changed recently. I have tried lubricating everywhere but no effect. Other possibility would be the shocks but since it squeks when standing still and just turning the wheels it seems unlikely. I also get the squek just by bouncing the car up and down at the front bumper and it is on both sides.
//Peter2011 Discovery 4 3.0 TDV6 S Automatic
1999 Discovery 2 V8 ES Automatic
Earlier
2006 Discovery 3 TDV6 SE Automatic
1996 Discovery 300 Tdi ES Automatic
1975 Series 3 2.25 diesel
Nanocom Evolution for D2 V8, D3 and D4
Working kelpies for working the sheep
31st Mar 2016 10:52 pm
Lee333
Member Since: 19 Jan 2016
Location: Chichester
Posts: 30
It's annoying the hell out of me !!
I'm going to see a mate today and put it on his m o t ramp it's a new bit of kit which moves the wheels in out up down etc should be able to pin it down to which bush is failing
I hope.
1st Apr 2016 7:24 am
PeterTh
Member Since: 06 Sep 2013
Location: Alunda
Posts: 330
I really hope you and your mate find the cause. I will for sure follow this tread hoping to reach Discovery nirvana!
//Peter2011 Discovery 4 3.0 TDV6 S Automatic
1999 Discovery 2 V8 ES Automatic
Earlier
2006 Discovery 3 TDV6 SE Automatic
1996 Discovery 300 Tdi ES Automatic
1975 Series 3 2.25 diesel
Nanocom Evolution for D2 V8, D3 and D4
Working kelpies for working the sheep
1st Apr 2016 7:27 am
Lee333
Member Since: 19 Jan 2016
Location: Chichester
Posts: 30
Well all the bushes are ok. No noises.
The 4x4 garage next door Put it down to the tensioner as the noise is at the front
Bought a new tensioner from landrover
Fitted it. And low and behold ...................
It's still doing it !!!!!!!
That's new steering fluid , new belt , bushes checked , and now a new tensioner.
Going to throw the towel in I think.
1st Apr 2016 1:19 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20841
Does it only make the noise as you are turning the steering wheel, or does it stop as soon as you stop turning?My D3 Build Thread
Member Since: 19 Jan 2016
Location: Chichester
Posts: 30
Only when I turn the steering wheel. It does it 80% of the time. Sometimes not at all but very rarely. And when I go over speed bumps. Apart from that it's silent when driving and when sat still either on idle or revved.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
