| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
|
|
countrywide
Member Since: 16 Sep 2007
Location: UK
Posts: 6019
  
|
stapldm wrote:Countrywide, did you JUST disconnect the canbus wires, or the whole multiplug? One of those other wires in the multiplug drives the fuel pump - no fuel, no burn...
I left pin 2 (to timer) and pin 5 (fuel pump) in the connector. There is no way to fire it up if you remove the whole connector. It tried to fire up, i.e the fan started but after 30 seconds it shut down. I tried putting one of the CAN wires back, but again it tried to fire but wouldn't. As soon as I put both CAN wires back in, it worked.
No idea why it is waiting for a CAN signal when the car is in sleep mode, but 10forcash who knows his stuff says the CANbus is active even in sleep mode so it could be a safety feature.
|
 25th Nov 2007 6:47 pm |
|
|
zaphod
Member Since: 18 Sep 2007
Location: Magrathea
Posts: 357
  
|
AndrewW
You have a PM  Sail Fast - Live Slow...
.. / -.- -. --- .-- / .-- .... . .-. . / -- -.-- / - --- .-- . .-.. / .. ...
|
| 27th Nov 2007 10:20 pm |
|
|
stapldm
Member Since: 11 Sep 2006
Location: Swine Town
Posts: 2330
|
countrywide wrote:No idea why it is waiting for a CAN signal when the car is in sleep mode, but 10forcash who knows his stuff says the CANbus is active even in sleep mode so it could be a safety feature.
Yes he does doesn't he My guess is that it gets a message every x seconds or so from the SRS system to say that the car hasn't crashed and that it's therefore safe to have a controlled mini bonfire going under the bonnet. Dr. Ian Malcolm:
"Yeah, but your scientists were so preoccupied with whether or not they could, they didn't stop to think if they should."
Transgenic tomato anyone?
|
| 27th Nov 2007 11:47 pm |
|
|
r22flyer
Member Since: 20 Nov 2007
Location: London
Posts: 1
|
Thanks Countrywide, I purchased the kit fitted it all works fine, but like yours as soon as I open the car the FBH stops, I am working on a remote kit from CPC and a relay which simulates the pushing if the flame button, with out opening the car up, I have also moded the timer so I could mount it next to the rear view mirror on the glass, Looks better than on the light, once I have tested the remote kit I'll post details.
Did someone note that the unused pin out on the timer is a 12v out ? if so I miight be able to use this to see when the timer is in operation (from the kitchen window via an led). Note sure can someone let me know
Martin
RRS TDV6
|
| 30th Nov 2007 10:34 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO4.COM is independent and not affiliated to Land Rover.
