Ambit
Member Since: 12 Dec 2017
Location: Wales UK
Posts: 236
|
c1a98 Yaw sensor circuit fault code hdc fault |
|
Have had this fault code come up on the disco 3, it’s a permanent fault code which you can clear with diag tool as soon as you turn ignition on and off again with starting engine the fault code comes straight back I’ve changed the Yaw sensor checked the cabling wiring and earths have also checked the earth points behind the drivers side kick panel I’ve also today had the abs module off checked loom and connectors all are dry and clean
If you then drive the car with hdc fault and suspension lowered for an hour or so switch it off come back to it an hour later and hdc fault on dash is gone suspension goes to normal height then the car is fine for three days or so and you have no Yaw sensor fault code after three days of no faults the Yaw sensor fault reoccurs and it’s been like this for about a month now
Trying to get to the bottom of it before if try recalibration of the steering angle sensor changing the brake light switch etc battery is good and has been tested
|
3rd Jan 2018 9:01 pm |
|
|
Ambit
Member Since: 12 Dec 2017
Location: Wales UK
Posts: 236
|
Bump - still having problems any suggestions
|
8th Jan 2018 4:48 pm |
|
|