Member Since: 22 Sep 2010
Location: Notts.
Posts: 8150
Must say it sounds rough, how much oil was put in? have you checked the oil level?- it must be checked with the engine running.It can when others can't,
It will when others won't,
It goes where others don't.
4th Feb 2018 10:30 pm
James1974
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
About 9 lifters was put in I’m gonna jack up tomm and check it again though don’t think it’s that it’s def from torque convertor as it sounds really loud through the inspection hole just don’t know how loud is to loud and it does sound worse on the video than it actually is the the earDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
4th Feb 2018 11:04 pm
James1974
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
I’m just wondering if it’s worth pulling the starter motor and checking the bolts are tight from convertor to flex plate any one have any ideas what else it could beDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
5th Feb 2018 10:44 am
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10453
May have over filled the gearbox.
5th Feb 2018 1:16 pm
James1974
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
Could that cause the noise tboughDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
5th Feb 2018 1:16 pm
James1974
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
Pete K wrote:
May have over filled the gearbox.
I tell u what just been out to ichexk the oil level drove round for it to get up to temp and undone plug on gearbox and loads of oil came out I recon 1-1 1/2 liters
Drove it round and the noise is all but gone its so faint that I can hardly hear it also seems to have more torque now unless I’m imaging itDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
5th Feb 2018 2:14 pm
James1974
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
This is what it sound like now any thoughts please
Disco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
5th Feb 2018 2:21 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13828
James1974 wrote:
Pete K wrote:
May have over filled the gearbox.
I tell u what just been out to ichexk the oil level drove round for it to get up to temp and undone plug on gearbox and loads of oil came out I recon 1-1 1/2 liters
Drove it round and the noise is all but gone its so faint that I can hardly hear it also seems to have more torque now unless I’m imaging it
would be good if thats what it is
did u use a thermometer whilst checking the oil level , did u check the level with the engine running or off plse
what was the colour of the ATF oil
5th Feb 2018 2:31 pm
James1974
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
Engine running and yes checked temp with diagnostic toolbut if you listen to both videos it’s def so much quieter although not completely gone but there again I’m trying to hear itDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
5th Feb 2018 2:40 pm
James1974
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
And oil was red dextron 6 and states it was for that gearbox but oil is really dirty already considering it’s only done 500 miles since it was changed with the converterDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
5th Feb 2018 2:43 pm
Gazellio
Member Since: 09 Jan 2011
Location: Chilterns
Posts: 4130
I would drain it and put the Land Rover recommended ZF Lifeguard in ASAP.
5th Feb 2018 3:27 pm
James1974
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
Was thinking that but bit hard to drain all the oil as convertor holds loads and carnt be drained from what I’ve readDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
5th Feb 2018 3:32 pm
Gazellio
Member Since: 09 Jan 2011
Location: Chilterns
Posts: 4130
Well one of the forum Mechanics will be on soon to tell you how to drain it properly, it obviously can be done, but best to get it flushed by an expert with the specialist machine as it sounds like there may be dirty oil and possible debris from the old converter still in there..
5th Feb 2018 3:36 pm
James1974
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
Is this the oil as on gsf website it says not for my vehicle
Disco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
5th Feb 2018 3:44 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10453
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
