Member Since: 18 Jan 2013
Location: taby
Posts: 10
Have I bought the right Burner glow plug - Servicing my FBH
I have a Disco 3 from 2007, diesel.
Earlier this year I replaced the FBH in April 2019 with a (2nd Hand older FBH model for 2004,2005,2006)
See image
Flack helped me fit the new unit and installed the BAS : FBH Heater Controller + did a remap /ERG Blanking.
He did a great job and everything has been running great, but since the weather here in Sweden has got cold, the FBH is timing out with Faults 1 02 01
It starts, the burner fires up and then fails, so I decided to service, decoke and replace the burner ready for the upcoming long Swedish winter
I ordered a new burner glow plug Pre-heater - LR010329 which was delivered OK last week.
see Image
I have now stripped my Old FBH and when I removed and inspected my old burner glow plug
Its slightly different from the burner which was delivered when compared side by side ?
See image
The main difference is = extra 2 black wires + connector and brown wire into the top of the burner, which I’ve highlighted in the image
See image : Left = New burner and Right = Old burner
Here are the two parts numbers of the burners and images
Old part = 9006328B & the new replacement part = 9016335A
Is this because the old 9006328B part has been superseded with the new version by LR?
Can I continue to use this new burner ? and simply not use this connector?
Any help would be great, as I need to quickly decide what to do next.
Either return the part to the UK and search for the correct replacement burner that matches my old one
Or continue to reinstall this burner and remove / not use the wires.
Cheers Jason
Last edited by Simmsy13 on 7th Nov 2019 7:09 pm. Edited 2 times in total
7th Nov 2019 4:48 pm
lynalldiscovery
Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
Hope this helps D3 x2 now gone
Volkswagen Tiguan Allspace 4motion
7th Nov 2019 7:54 pm
Dazz360
Member Since: 03 Sep 2016
Location: West Mids Walsall
Posts: 873
Where do the black wires go tooMetal auto sump & fluid change (3 hrs)
LR door puddle projectors (10 mins)
Tinted Bonnet wind deflector (10 mins)
All Intercooler pipes and Tbolts (2hrs)
3 injectors replaced so far (30mins)
Sunroof drain pipes both sides 2.5 hrs)
Rear discs, shoes,pads,callipers,flexi hoses, rigid brake line, n/s upper hub carrier bush and rear n/s upper arm (13hrs over 2 days)
7th Nov 2019 8:22 pm
Dazz360
Member Since: 03 Sep 2016
Location: West Mids Walsall
Posts: 873
Try page 11 it seems like is a fuel shut off solenoid I think
https://www.butlertechnik.com/downloads/We...Manual.pdfMetal auto sump & fluid change (3 hrs)
LR door puddle projectors (10 mins)
Tinted Bonnet wind deflector (10 mins)
All Intercooler pipes and Tbolts (2hrs)
3 injectors replaced so far (30mins)
Sunroof drain pipes both sides 2.5 hrs)
Rear discs, shoes,pads,callipers,flexi hoses, rigid brake line, n/s upper hub carrier bush and rear n/s upper arm (13hrs over 2 days)
7th Nov 2019 8:31 pm
Huge Halford
Member Since: 30 May 2013
Location: West Midlands
Posts: 275
There is a blanking plug next to where the white plug goes, remove the blanking plug and push the extra plug in...
Hope this makes sense......Mods:-
Beanie Grill,Side Steps,Colour-coded wheel arches, Door handles and Bumpers,Rear Bumper Exhaust Trim,Remote Start FBH,2014 D4 rear lights,Reversing camera GVIF enabled,D4 Bluetooth Module, Puddle lighted wing mirrors
To do list:-
Waxoyl the Underside.
9th Nov 2019 3:35 pm
Simmsy13
Member Since: 18 Jan 2013
Location: taby
Posts: 10
Smokinnnnn again. FBH all fired up with no problems
Thanks for the support and links chaps
Keep smiling
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
