Member Since: 02 Jan 2020
Location: Belgium
Posts: 11
Help Bank numbering TDV6 in IIDTOOL
Hello
I'm trying to sort out [u]for sure how the IIDTOOL bank numbering correlates to the other definitions.
I did many searches and got many different answers (or non at all...)
Maybe my question is too stupid...
Bank identification for EGR issues : Bank 0/Bank 1
Other definitions on the net Bank 1 / Bank 2, Bank A / Bank B, LH Bank / RH Bank, Offside Bank...
Some are talking about passengers side.... drivers side
The IIDTOOL values let me to the conclusion that I have to change valve on Bank 0. As the 2 valves used on the TDV6 (EURO4 with DPF in my case) are different, It's important to know which valve to order, not spoken of the amount of work in case of choosing the wrong side.
So can anyone tell me correctly if valve 0 is on the side of cilinder 1 or on the side of cilinder 4?
It would be a great help, not only to me I guess.
Blanking is not an option for me at the moment due to future changing policy by Belgian MOT...
Manny thanks,
ChrisIIDTool BT G3
9th Dec 2020 10:17 am
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10679
all I can say is,
disconnect the EGR you suspect.
drive the car and get it warm.
read the fault codes, do you only get fault codes saying the same bank as previously? If yes, that helps confirm it.
Clear codes.
If you want, reconnect, and then unplug the good side
drive the car and get it warm.
read the fault codes,
is it saying the other side now ?
Last edited by Pete K on 9th Dec 2020 12:28 pm. Edited 1 time in total
9th Dec 2020 12:07 pm
ChrisLR3
Member Since: 02 Jan 2020
Location: Belgium
Posts: 11
Good idea!
I will try it ASAP and post the result.
ThxIIDTool BT G3
9th Dec 2020 12:11 pm
ChrisLR3
Member Since: 02 Jan 2020
Location: Belgium
Posts: 11
Pete K wrote:
all I can say is,
disconnect the EGR you suspect.
drive the car and get it warm.
read the fault codes, do you only get fault codes saying the same bank as previously? If yes, that helps confirm it.
Clear codes.
If you want, reconnect, and then unplug the good side
drive the car and get it warm.
read the fault codes,
is it saying the other side now ?
I followed your suggestion, unplugged the valves and looked what happened with the EGR live values.
I confirm bank 0 is at the Right hand side of the engine seen from inside the vehicle.
(At the side of cilinder N° 1 on the picture)
Hopefully this can help other forum members.IIDTool BT G3
9th Dec 2020 4:55 pm
christianmoe
Member Since: 24 Feb 2015
Location: Tromsø
Posts: 2
Thanks Christian Moe, Tromsø¸, Norway
Discovery 3 HSE -08 & Series IIb Forward Control -70
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
