Member Since: 04 Feb 2015
Location: Gloucester
Posts: 329
the pic of them saying 2.55m is correct if nothing is in the way.
if the sensor has gone wrong ie continuous tone when selecting revers the good ones will say 2.55m and the duff ones will say 0m or it keeps changing.
if you have the bluetooth iid you can stand at the back of the car and put your hand in the way and see the values change.
10th Nov 2022 4:30 pm
cmb2020
Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150
So I swapped the sounder and still nothing
BUT I found this unplugged!!
However I can’t for the life of me find where it plugs back in to can any of you guys advise please?
Thanks
Disco 3 SE Manual 2005 V6 2.7
Buckley, North Wales
11th Nov 2022 1:10 pm
cmb2020
Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150
Further to finding the loose plug…
I’m getting 12.10v if I put multimeter on the brown and red terminals of the car side plug behind the brake light to the sensors. It goes to 12.10v when the ignition is on. Wether I’m reverse with epb off or not?
Maybe I’m doing it wrong?Disco 3 SE Manual 2005 V6 2.7
Buckley, North Wales
11th Nov 2022 1:38 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10385
Spare plug is probably from rear music controls.
Glad you have the voltage.
Clear the codes and see if the speaker one has gone.
Also measure the resistance of old speaker. Does it measure 50R or open ?
When you first turn park brake off and then select reverse you should get a beep or error tone
11th Nov 2022 2:11 pm
cmb2020
Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150
No tone
I used to get a tone
I’m just going to buy 21mm wide reverse sensor kit from eBay they should fit
Had enough now haha
Thanks again as alwaysDisco 3 SE Manual 2005 V6 2.7
Buckley, North Wales
11th Nov 2022 2:12 pm
cmb2020
Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150
Just got an eBay kit to replace
If anyone else does the same in future then the rear sensor mount is 26mm wide and the inner sensor it’s self is 22mm wide
I’ve ordered 22mm so they should slot in nice. If not flush then I’ll file the lip nicely and get a snug fit
Saves losing time I hope!Disco 3 SE Manual 2005 V6 2.7
Buckley, North Wales
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum