Member Since: 16 Aug 2005
Location: Warwickshire
Posts: 4506
I subscribe to their videos as they tend to be enjoyable and there isn't much D3 content out there anymore. I especially like seeing them attempt big jobs from home, they're an oddly entertaining couple too.
But that's where I leave it. Advice on matters of maintenance and repairs are left to professionals, partly because I believe you need a significantly larger sample size than one or two before you can make any robust assumptions on best practice. I generally trust the OEM recommendations although have seen first hand some of the compromises they sometimes need to make to meet various requirements. My local indy has seen 2k + D3s over his 18 years in business, that gives me trust that he's seen what works / doesn't work across a breadth of TDV6s with different ages/mileage/historys.2007 Porsche Boxster (987) 2.7
2008 Discovery 3 TDV6 HSE G4 Challenge (1 of 68)
2023 Defender 90 D250 X-Dynamic HSE
8th Feb 2023 8:41 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14136
Pete K wrote:
gstuart wrote:
Please excuse me but may I ask a daft question plse
If I heard it correctly within the first video about oil can drain from the oil filter and oil pump , however I thought there were check valves in both to prevent oil from draining , therefore keeping them primed , maybe I’ve totally misunderstood
As always , thanks a million and am so grateful for learning new things from so many extremely knowledgeable members
There is a check valve thing, but when left for hours or days some oil will drain down
Bless u as always Pete
Last edited by gstuart on 8th Feb 2023 11:56 am. Edited 1 time in total
8th Feb 2023 11:54 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14136
HairyFool wrote:
gstuart wrote:
Please excuse me but may I ask a daft question plse
If I heard it correctly within the first video about oil can drain from the oil filter and oil pump , however I thought there were check valves in both to prevent oil from draining , therefore keeping them primed , maybe I’ve totally misunderstood
As always , thanks a million and am so grateful for learning new things from so many extremely knowledgeable members
If oil remained in the filter due to its location when you remove the filter bowl oil would flood the top of the engine in normal circumstances.
When doing an oil/filter change you should unscrew the bowl 4 turns and leave it for a time. This pulls the filter off its spigot which allows the oil to drain out of the bowl and down through the engine.
Many thks and makes sense
8th Feb 2023 11:56 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14136
RRSTDV8 wrote:
Shamrock wrote:
The problem is that the experts' advice is based not only on pragmatic criteria, but also on hidden objectives such as economic choices or environmental regulations. This is why everyone is reluctant to trust them, even if they are generally right.
People don't trust experts thanks to the internet strengthening the Dunning-Kruger effect. 5 minutes online and they think they know everything.
Plus 1, Alas use to get that a lot as more and more videos came online with regards to boilers etc , never forget a wife wasn’t amused that her husband had removed the boiler from the wall and laid out all the parts along the length of the worktop after it stopped working
For me to then say sorry u need a new boiler , plus at the end of the day he had placed some boxes in a cupboard and one of them had pressed against the boiler switch turning it off, his wife was not amused
8th Feb 2023 12:03 pm
jenseneverest
Member Since: 12 Jun 2017
Location: somewhere
Posts: 769
Some people don't trust experts, because the so called experts also get it wrong.
Some people blindly follow experts like sheep, knowing they have expert advise to refer to excuse there failure. Some people only entertain whatever fits there own agenda.
Sadly common sense is in short supply all round.
8th Feb 2023 2:40 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14136
Ur so right with regards to common sense as indeed can’t be taught , this should give u a laugh
Many years ago was working on a building site where they were converting an old fire station to flats
We placed several wc pans into the front room against the wall whilst working in the bathrooms to prevent them getting damaged , we asked the apprentice to drill the 4 inch holes in the bathrooms whilst working on one of the other units
could hear the core drill going for some time , on returning and where we had placed the pans against the bedroom wall the apprentice moved them away and was drilling several holes through the walls like a communal bathroom
8th Feb 2023 2:50 pm
HairyFool
Member Since: 04 Jan 2023
Location: North Essex
Posts: 684
So what is the best way to install an oil pressure gauge? Preferably after the oil filter.A visitor from the dark side, my other vehicle is an is still an EV. Strictly speaking its SWMBO.
8th Feb 2023 6:15 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20842
Member Since: 13 Aug 2010
Location: UK
Posts: 14414
jenseneverest wrote:
Some people don't trust experts, because the so called experts also get it wrong.
Some people blindly follow experts like sheep, knowing they have expert advise to refer to excuse there failure. Some people only entertain whatever fits there own agenda.
Sadly common sense is in short supply all round.
At the end of the day it’s only advice, it’s how use it that’s key. I agree about common sense though but would also throw in taking responsibility for one’s own actions. But we digress.D4 HSE EU6 (Known as Jeeves)
New Defender L663 110 SE (known as Noddy!) Sold
Sold Volvo XC90 R-Design (known as Basil)
Sold - D4 HSE (Known as Gerty)
No longer the Old Buses original owner
231,000 miles and counting
05 S manual owned from March 2005
D4 Face lifted
Still original injectors and turbo
V8 Front brakes
BAS Remap, Allisport Intercooler and deCat
EGRs blanked
T-Max split charge
Hanibal Expeedition rack
Prospeed ladder
Duratrac tyres
IID BT
BAS FBH control
8th Feb 2023 6:35 pm
Windsurfnut
Member Since: 18 Nov 2022
Location: Cognac
Posts: 11
HairyFool wrote:
So what is the best way to install an oil pressure gauge? Preferably after the oil filter.
Well you could watch Christian and Vera because they have done that too.
8th Feb 2023 10:17 pm
Flatlander
Member Since: 20 Jul 2015
Location: Here
Posts: 575
Wild.
Honestly, I don't know how some people manage to sleep, waiting for the next instalment of their entertainment.
8th Feb 2023 10:32 pm
Moo D3 Decade
Member Since: 13 Aug 2010
Location: UK
Posts: 14414
D4 HSE EU6 (Known as Jeeves)
New Defender L663 110 SE (known as Noddy!) Sold
Sold Volvo XC90 R-Design (known as Basil)
Sold - D4 HSE (Known as Gerty)
No longer the Old Buses original owner
231,000 miles and counting
05 S manual owned from March 2005
D4 Face lifted
Still original injectors and turbo
V8 Front brakes
BAS Remap, Allisport Intercooler and deCat
EGRs blanked
T-Max split charge
Hanibal Expeedition rack
Prospeed ladder
Duratrac tyres
IID BT
BAS FBH control
8th Feb 2023 10:35 pm
Flatlander
Member Since: 20 Jul 2015
Location: Here
Posts: 575
Yep, it is boring, personally I'd rather have personal interactions, discuss things with factual input and challenge opinions - 'IRL' as you probably know it.
The science of engine lubrication is molecular chemistry & fluid dynamics - something I'm not trained or experienced in. So I wouldn't second-guess those who are, the ones employed by the component and engine design & manufacturing companies, the ones that have ongoing liability and professional competencies. Things progress, manufacturers of ancillaries change and so do part numbers to reflect the changes, as designs are refined, then specifications of (for example) lubricants evolve, hence the changes during the life cycle of engines - something that isn't unique to JLR or Ford / PSA.
My field is electrical / electronic vehicle systems - thankfully governed by physics, not the black arts of chemistry & fluid dynamics, those that specialise in those fields command a high salary and for good reason. None of them appear to have youtube channels.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
