| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
Secondtonone69
Member Since: 10 Jun 2023
Location: London
Posts: 8
  
|
| Electric sterring column upgrade from manualnadjustament |
|
Hi all, i have taken a dash loom and electric column from 2015 hse and install it on my own 2016 graphite ,my own came with manual adjustament ,all good except i have.no power on the plug ,that part of wiring is dead ,does it require ecu flash or bcm upadate ??
|
 10th Jun 2023 6:34 pm |
|
|
Secondtonone69
Member Since: 10 Jun 2023
Location: London
Posts: 8
|
So basically comes with a different CJB/BCM ,got a new one and needs to be flashed after install (brand new BCM /CJB) so to retrofit electric steering column ,you will need a dash loom with electric tilt/telecopic terminals /an electric steering column /control button/new plastic trim /and new BCM with electric steering column and the rest can be done wit IId tool from Gap.
|
| 14th Jun 2023 10:46 pm |
|
|
popsdosh
Member Since: 09 Nov 2009
Location: cambs
Posts: 442
|
without peeing on your parade im not sure it will end there ! Its not an upgrade I have ever seen mention of and some have tried all sorts of upgrades . Cant see it working fully without memory seats and mirrors installed.
|
| 15th Jun 2023 6:44 am |
|
|
Secondtonone69
Member Since: 10 Jun 2023
Location: London
Posts: 8
|
Already retrofitted so memmory module present.
|
| 15th Jun 2023 12:44 pm |
|
|
popsdosh
Member Since: 09 Nov 2009
Location: cambs
Posts: 442
|
Guess your the guinea pig then.. Its an expensive way of getting what you wanted in the first place rather than buy the right vehicle. Good luck with your ambition if its not just money down the drain as it cant be done.
|
| 16th Jun 2023 11:06 pm |
|
|
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8226
|
Never use mine! - but good luck with the upgrade and don't forget to notify your insurance. It can when others can't,
It will when others won't,
It goes where others don't.
|
| 17th Jun 2023 9:25 am |
|
|
Secondtonone69
Member Since: 10 Jun 2023
Location: London
Posts: 8
|
The ideea was to get some tehnical help,if it can't be done , i would like to know why,and if something can get retrofitted/upgraded ,an advice will be nice ,in regards to memorry seats ,the wiring on a graphite 2016 is there same as for mirrors and memorry switch ,gap iid tool and you will have them working ,in regards to electric adjustament column ,i see no reason not to work ,the wiring /cjb/hardware +software all ok ,as of why im doing it and not changing the car ,its more like something to keep me busy and my car is over 100k miles anyway ,i would like to see tehnical advices ,not to expensive ,insurance will go up ,... anyway thanks for your kind words .
|
| 18th Jun 2023 10:45 pm |
|
|
Secondtonone69
Member Since: 10 Jun 2023
Location: London
Posts: 8
|
Memorry seats full set £500ebay ,mirrors upgrade : the electric motors insede £40 each/electric stearring column £40+dash loom £40 new plastic trim for column £20 and manage to sel my seats for £350 ,all in all cost me less then land rover wanted for them in the first place and 310$ the new unprogramed cjb/bcm from the states i will update the post after it comes and i will update and code in ,hope it works
|
| 18th Jun 2023 10:55 pm |
|
|
Moo
D3 Decade
Member Since: 13 Aug 2010
Location: UK
Posts: 14389
  
|
Interesting. Good luck.  New Defender L663 110 SE (known as Noddy!)
Sold Volvo XC90 R-Design (known as Basil)
Sold - D4 HSE (Known as Gerty)
No longer the Old Buses original owner 
231,000 miles and counting
05 S manual owned from March 2005
D4 Face lifted
Still original injectors and turbo
V8 Front brakes
BAS Remap, Allisport Intercooler and deCat
EGRs blanked
T-Max split charge
Hanibal Expeedition rack
Prospeed ladder
Duratrac tyres
IID BT
BAS FBH control
|
| 18th Jun 2023 11:06 pm |
|
|
popsdosh
Member Since: 09 Nov 2009
Location: cambs
Posts: 442
|
Secondtonone69 wrote:Memorry seats full set £500ebay ,mirrors upgrade : the electric motors insede £40 each/electric stearring column £40+dash loom £40 new plastic trim for column £20 and manage to sel my seats for £350 ,all in all cost me less then land rover wanted for them in the first place and 310$ the new unprogramed cjb/bcm from the states i will update the post after it comes and i will update and code in ,hope it works
I would email GAP and check out exactly the capabilities of the GAP tool and what needs uploading for your project, Pat would also be a good source of knowledge re the possible issues . Going to JLR to enable ECUs is not going to help as they can only upload what the system allows and thats basically down to original configuration as it left the factory which is checked against the VIN and has to be connected online .
The reason you have not heard from anybody that has tried is probably because nobody has tried ! Have you tried searching on here ?
|
| 19th Jun 2023 7:19 am |
|
|
Oswiperus
D3 Decade
Member Since: 02 Apr 2010
Location: Chelmsford, Essex
Posts: 1599
|
I may be wrong but I would be surprised if you need a new BCM, Using a suitable diagnostic tool like the Gap IID tool I would expect that you will just need to edit the CCF files to tell the car which parts are now fitted. Stu
2016 D4 Landmark current
2022 Defender D300 SE Gone
D4 2014 XS Commercial - Gone
D4 2016 hse lux montalcino red - Gone
D3 2005 se java black - current
D3 2005 base manual - gone
D2 1999 TD5 E white - current
|
| 19th Jun 2023 7:57 am |
|
|
Secondtonone69
Member Since: 10 Jun 2023
Location: London
Posts: 8
|
LR074207 is the bcm/cjb with electric steering column /LR074205 is the one for a manual adjustment /ccf files you can edit ,button works shows when switched on auto ,power to the motors is zero as the cjb dosent have the transistors to power the motors,i did had a long chat with Patrick from Gap,they are going to write a special program when my new bcm gets delivered /and the only down side is it must be a new unprogramed bcm same serial numbers one is version AA the new one is BA
|
| 19th Jun 2023 2:06 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO4.COM is independent and not affiliated to Land Rover.
