Member Since: 05 Jan 2024
Location: South Wales
Posts: 123
I like the setup you have gstuart, for the fuses etc.., it's the sort of thing I would do.
I've sent the company a message for the aux wiring, as when it comes to the payment, an error message comes up, I think it's possibly because of posting to the UK.
I didn't realise how cheap the wiring is, it's crazy, lol.
If I get a reply, I'll update on here, as it's a no brainer fix.😎Volunteer driver with 4x4 Response South East Wales
Volunteer Rider for Blood Bikes Wales
Land Rovers owned -
Disco 1 - 300 Tdi - dead
Disco 1 - 200 series - 3.5 V8 on LPG - dead
Disco 2 - TD5 - sold
Disco 1 - 300 series - 3.9 V8 on LPG - sold
Disco 3 - TDV6 HSE - current
4th Feb 2024 2:30 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14177
Many thks for the kind compliment , can’t take all the credit as was given fantastic online help along the way from extremely kind forum members
Indeed will make life a lot easier when fitting aux items , plse let us know how u get on, many thks
4th Feb 2024 5:11 pm
stalkem
Member Since: 20 Feb 2024
Location: New York
Posts: 4
Since this thread is fairly active, I hope you don't mind me jumping in with a question. My new to me LR3 has a ticking noise when AUX is selected and horribly garbled sound when playing through it. I've been googling all weekend (between this and other forums), and have not found any posts about similar symptoms.
I'm not quite sure where to start on that. I was thinking maybe it was just something with the actual aux connection in the rear, and recently cut the line from the back of the head unit to install a replacement adaptor... same symptoms as the original line and connector. Would that be a bad ground to the connector at the back of the head unit that is getting backfed or something else?
The end goal is to replace the factory screen with an android auto screen plugged into that replacement aux connector behind the head unit. I've already got that orange fiber jumper installed. Thanks!
20th Feb 2024 1:54 pm
KevinD3
Member Since: 05 Aug 2020
Location: Sutton Coldfield
Posts: 1277
Pick of mine with the extra add on underneath. Have a 12v socket and twin usb running from the aux battery on the left, battery monitor for both batteries in the centre, then 12v socket and twin usb off the main on the right, bottom set of switches are for amber beacons and work lights.
Missiles and ejection seat hare disabled when my sone sits in the front
Click image to enlarge
2008 HSE Stornoway Grey
My Wife thinks the D3 is a hobby, The D3 thinks the wife is 💕
20th Feb 2024 6:38 pm
skunk38
Member Since: 05 Jan 2024
Location: South Wales
Posts: 123
KevinD3,
That looks a good setup too.
Is that a cb or ham radio, as I'd be interested in how you setup your antenna, i.e. cable run and mount options.Volunteer driver with 4x4 Response South East Wales
Volunteer Rider for Blood Bikes Wales
Land Rovers owned -
Disco 1 - 300 Tdi - dead
Disco 1 - 200 series - 3.5 V8 on LPG - dead
Disco 2 - TD5 - sold
Disco 1 - 300 series - 3.9 V8 on LPG - sold
Disco 3 - TDV6 HSE - current
20th Feb 2024 7:17 pm
KevinD3
Member Since: 05 Aug 2020
Location: Sutton Coldfield
Posts: 1277
Hi Skunk, I’ll PM you, save taking over a thread on aux inputs 2008 HSE Stornoway Grey
My Wife thinks the D3 is a hobby, The D3 thinks the wife is 💕
20th Feb 2024 7:23 pm
skunk38
Member Since: 05 Jan 2024
Location: South Wales
Posts: 123
gstuart,
I got in touch with Kram and they put me on to their old UK supplier who said they haven't had the cables for a while as demand dried up.
As an alternative I've ordered a bluetooth plug and play unit from ebay which plugs into the rear aux loom similar to what you did at the head unit. It will be interesting to see how it goes.
Land Rovers owned -
Disco 1 - 300 Tdi - dead
Disco 1 - 200 series - 3.5 V8 on LPG - dead
Disco 2 - TD5 - sold
Disco 1 - 300 series - 3.9 V8 on LPG - sold
Disco 3 - TDV6 HSE - current
21st Feb 2024 6:01 pm
skunk38
Member Since: 05 Jan 2024
Location: South Wales
Posts: 123
I've fitted the unit which took all of 10 mins doing a temp install with the supply wires, as just bared them back a bit, removed the plug on the back of the 12V socket and fitted them into the power socket plug where the spade connectors hold them tight when the plug is put back on.
I will sort the wires properly, as did it quick in work to test. It works fine, so now have a cheap BT wireless connection and can stream, call and listen to anything on the phone through the aux input. I've also got my Echo auto connected.
It was a little snug putting the assembly back in place, but all good. Volunteer driver with 4x4 Response South East Wales
Volunteer Rider for Blood Bikes Wales
Land Rovers owned -
Disco 1 - 300 Tdi - dead
Disco 1 - 200 series - 3.5 V8 on LPG - dead
Disco 2 - TD5 - sold
Disco 1 - 300 series - 3.9 V8 on LPG - sold
Disco 3 - TDV6 HSE - current
25th Feb 2024 3:28 pm
skunk38
Member Since: 05 Jan 2024
Location: South Wales
Posts: 123
stalkem wrote:
Since this thread is fairly active, I hope you don't mind me jumping in with a question. My new to me LR3 has a ticking noise when AUX is selected and horribly garbled sound when playing through it. I've been googling all weekend (between this and other forums), and have not found any posts about similar symptoms.
I'm not quite sure where to start on that. I was thinking maybe it was just something with the actual aux connection in the rear, and recently cut the line from the back of the head unit to install a replacement adaptor... same symptoms as the original line and connector. Would that be a bad ground to the connector at the back of the head unit that is getting backfed or something else?
The end goal is to replace the factory screen with an android auto screen plugged into that replacement aux connector behind the head unit. I've already got that orange fiber jumper installed. Thanks!
Hi Stalkem,
I can't answer that unfortunately, although have you checked the contacts and wiring on the aux unit?
If you jump to my follow up posts below yours, I've put a bluetooth unit in mine now, so pretty much made the aux socket redundant. I also run an Echo auto through it for streaming radio, music etc.Volunteer driver with 4x4 Response South East Wales
Volunteer Rider for Blood Bikes Wales
Land Rovers owned -
Disco 1 - 300 Tdi - dead
Disco 1 - 200 series - 3.5 V8 on LPG - dead
Disco 2 - TD5 - sold
Disco 1 - 300 series - 3.9 V8 on LPG - sold
Disco 3 - TDV6 HSE - current
27th Feb 2024 8:25 pm
loanrangie
Member Since: 18 Jun 2017
Location: Melbourne
Posts: 706
skunk38 wrote:
gstuart,
I got in touch with Kram and they put me on to their old UK supplier who said they haven't had the cables for a while as demand dried up.
As an alternative I've ordered a bluetooth plug and play unit from ebay which plugs into the rear aux loom similar to what you did at the head unit. It will be interesting to see how it goes.
They look like a good alternative if you have the aux wiring.
28th Feb 2024 2:42 am
skunk38
Member Since: 05 Jan 2024
Location: South Wales
Posts: 123
An update to using the Bluetooth unit off eBay- it appears the volume issue still happens if there isn't anything plugged into the auxiliary socket. I forgot I still had a cable plugged in for using my Echo auto before installing the BT unit, so when I unplugged it, the volume was low. Plug back in and OK, so disappointed as thought it would have worked OK being connected into the existing loom plugs. I haven't investigated further yet, but will see what can be done.Volunteer driver with 4x4 Response South East Wales
Volunteer Rider for Blood Bikes Wales
Land Rovers owned -
Disco 1 - 300 Tdi - dead
Disco 1 - 200 series - 3.5 V8 on LPG - dead
Disco 2 - TD5 - sold
Disco 1 - 300 series - 3.9 V8 on LPG - sold
Disco 3 - TDV6 HSE - current
7th Mar 2024 2:16 pm
KevinD3
Member Since: 05 Aug 2020
Location: Sutton Coldfield
Posts: 1277
Some guys in the past have just gotten a blank 90 degree plug to fill the aux socket, should do the job for you, get the right one you’ll still be able to close the flap as well2008 HSE Stornoway Grey
My Wife thinks the D3 is a hobby, The D3 thinks the wife is 💕
Some of the CarPlay systems I install require a blank, which comes with the system, it really irked me that the flap can’t be closed when they are fitted, so I found these and now use them instead. They work and are almost invisible when fitted, and stop inquisitive little hands removing them!
https://www.ebay.co.uk/itm/185612608506?mk...media=COPY
Discovery 3/4 & RRS keys cut and programmed at your home or work
Apple CarPlay/ Android Auto retro fit - see it here
BAS Remaps/ EGR Blanking
Software updates/ enabling
Mobile Servicing & Repairs
Last edited by CDS on 17th Mar 2024 10:59 am. Edited 1 time in total
7th Mar 2024 11:23 pm
skunk38
Member Since: 05 Jan 2024
Location: South Wales
Posts: 123
CDS, thanks, I've got some blanks now.
I've also got a D4 Nav unit coming to replace mine. Volunteer driver with 4x4 Response South East Wales
Volunteer Rider for Blood Bikes Wales
Land Rovers owned -
Disco 1 - 300 Tdi - dead
Disco 1 - 200 series - 3.5 V8 on LPG - dead
Disco 2 - TD5 - sold
Disco 1 - 300 series - 3.9 V8 on LPG - sold
Disco 3 - TDV6 HSE - current
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
