The air charge cooler hose has oil around the bottome of it and also on the box at the top.
Is this normal or does it indicate replacement is necessary??
Click image to enlarge
Click image to enlarge
Have a nice day!
2010 Cayenne Diesel with PASM & Off Road Pkg
2005 HSE D3 (Sold)
11th Dec 2008 11:25 am
DiscoDunc
Member Since: 08 May 2006
Location: Bristol
Posts: 16390
mines the same. has been for ages. its been through 3 services since and LR dealer hasnt mentioned anything..Duncan
-----------------------------------------------------
If I'd known I was going to be so thirsty this morning I'd have drunk more beer last night.
FFRR Autobiography 4.4 SDV8 MY17
D4 HSE MY13 SOLD
FFRR 3.6 Vogue TDV8 SOLD
D4 HSE MY10 SOLD
D4 SE TECH MY15 SOLD
D4 XS MY12 SOLD
D4 HSE MY10 SOLD
D3 HSE MY06 - Re-Cycled Worldwide
Thanks Duncan! Have a nice day!
2010 Cayenne Diesel with PASM & Off Road Pkg
2005 HSE D3 (Sold)
Last edited by Jamo on 11th Dec 2008 1:30 pm. Edited 1 time in total
11th Dec 2008 11:59 am
stapldm
Member Since: 11 Sep 2006
Location: Swine Town
Posts: 2330
Looks normal to me Jamo. Though mine hasn't yet shown these external signs, I do expect it to at some point. I do have a healthy covering inside all the pipes/hoses though, as I found when doing the EGR mod.
My previous turbo'd cars all did the same; it's the minute amount of oil that gets past the seals on the turbo shaft and then gets vaporised by the heat and airflow. It then condenses in the rest of the system, and can also sweat out of the hoses and joints.
My old Volvo 740 had a drain cock on the inter-cooler to cope with the much higher oil losses that older turbos had, and the hoses were so oily you had to use a cloth to get a grip on them.
Oh, and don't assume that 'cos your turbo is 'leaking' a little oil that it's failing, because I believe the leak is by design to protect and lubricate the seals; My 740 covered 220,000 miles of lead-foot driving and the turbo was in perfect condition when I had to let it go.
By the way, there's an air-charge thermometer in the front of the plastic housing; for optimum engine performance, it's worth taking this out and cleaning the (insulating) oil layer off it every now and again. I seem to recall a gentle twist anticlockwise by 90 degrees removers it; just don't stress the wires.
Edit : OK, I've looked at your picture again, and I can't see thethermistor; must be on my MY and not yours.Dr. Ian Malcolm:
"Yeah, but your scientists were so preoccupied with whether or not they could, they didn't stop to think if they should."
Transgenic tomato anyone?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum