Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
DISCO4.COM > Australia & New Zealand

Brake Pad Replacement Charges
Post Reply  Down to end
Page 1 of 2 12>
Zilch
 


Member Since: 24 Apr 2006
Location: Sydney
Posts: 131

Australia 
Brake Pad Replacement Charges

Vehicle had its 72K service, actually only at 61k, apparently the Pads and rotors need replacing. I have been quoted

Front Pads, Sensors and Rotors - Rear Pads, Sensors, machined existing rears - $1283

All round Pads, Sensors and Rotors - $1553

Is this similar to what you guys are being quoted. Fully franchised Sydney dealership... or any recommendations for a non franchised dealership that can still do the work cheaper without invalidating warranty ??

Thanks

Jim
 another Pommie from the darkside

MY20 Defender P400 SE
MY103 RR Sport TDv6 
 
Post #38826615th Dec 2008 9:47 am
View user's profile Send private message View poster's gallery Reply with quote
LeighW
D3 Decade 


Member Since: 31 Jan 2006
Location: Brisbane, AUS
Posts: 920

Australia 2006 Discovery 3 TDV6 S Auto Bonatti GreyDiscovery 3

Jim, whilst I haven't got the exact figure, mine were done last month at 62 000 km for around $1450 (pads, rotors and sensors). At a Land Rover dealer - so the quote you have sounds about right.
But of course, mine would be cheaper as it is not a RRS Laughing

Note added 30 Dec 2008: I assumed the sensors were replaced but I haven't checked the paperwork. Maybe not, considering all the talk about them being able to be reused. (As soon as I get the paperwork back from the acct. I will advise here.)
 LeighW

The old girl is on her third engine...
* first ran a bearing (design failure in original engine)
* second had a failure of the water outlet on top of the engine (pls check yours) 


Last edited by LeighW on 30th Dec 2008 1:00 pm. Edited 1 time in total 
Post #38826715th Dec 2008 9:51 am
View user's profile Send private message View poster's gallery Reply with quote
Zilch
 


Member Since: 24 Apr 2006
Location: Sydney
Posts: 131

Australia 

LeighW wrote:
so the quote you have sounds about right.
But of course, mine would be cheaper as it is not a RRS Laughing


Leigh many thanks, i suppose its the ultra rare fragrant oils they have to use on the RRS's sensitive brake parts rather than grease that puts the price up Wink Laughing

Cheers Jim
 another Pommie from the darkside

MY20 Defender P400 SE
MY103 RR Sport TDv6 
 
Post #38826915th Dec 2008 9:57 am
View user's profile Send private message View poster's gallery Reply with quote
catweasel
 


Member Since: 05 May 2006
Location: Bundaleer
Posts: 4805

Re: Brake Pad Replacement Charges

Zilch wrote:
without invalidating warranty ??
not sure about the eastern states( you should check) but it is restriction of trade not being allowed to get stuff done elsewhere and is illegal. so long as the work done meets the LR specs then warranty is not affected.

sounds ridiculously expensive to me and why sensors, did yours wear out. if not they just get reused and IIRC there is only two. one at the front and one rear. TBH the sensors are a gimmick if you ask me and regular visual checks should be done.
  
Post #38831615th Dec 2008 11:21 am
View user's profile Send private message View poster's gallery Reply with quote
wopac5
 


Member Since: 20 May 2007
Location: Karratha
Posts: 146

Australia 2006 Discovery 3 TDV6 SE Auto Chawton WhiteDiscovery 3

I'm not sure the price is all that bad.

I have bought a set of DBA Cross drilled and vented rotors (2x 4000 series at $250 each and 2x street series for the rear at $160 each) for my son's XR6 Turbo (X-mas present) plus pads and he will be fitting them himself so total without labour...$820.oo plus pads...$ 150 for front and rear...$970 NO labour.

Get a price from a brake place to fit BDA 4000 series drilled and slotted rotors and compare. (even the standard street series are available drilled and slotted which will be less than the 4000series)

You may even find that all that is required is a set of pads...get someone to confirm the disc thickness.

see: www.dba.com.au

and use the search tool for part numbers. They do make 'em for LR3 etc.

Cheers
  
Post #38834015th Dec 2008 12:01 pm
View user's profile Send private message View poster's gallery Reply with quote
DiscoAtom
 


Member Since: 28 Sep 2006
Location: Sydney
Posts: 142

Australia 2006 Discovery 3 TDV6 SE Auto Buckingham BlueDiscovery 3

Had my set of 4 pads replaced at around 40,000 km for $600 (I think). Noticed that the front brake pads started rattling in their calipers when going over bumps though.
 '06 Disco 3 TDV6 SE Buckingham Blue  
Post #38852215th Dec 2008 8:17 pm
View user's profile Send private message View poster's gallery Reply with quote
zetecr
 


Member Since: 11 Aug 2006
Location: Sydney
Posts: 64

Australia 2006 Discovery 3 TDV6 SE Auto Chawton WhiteDiscovery 3

I've done just on 80k kms and my dealer recently quoted about $1250 for "the lot" - discs and pads front and rear. The rear rotors were not needed and the job was done for about $930 (can't recall exactly)
  
Post #38880616th Dec 2008 12:07 pm
View user's profile Send private message View poster's gallery Reply with quote
TDMP
 


Member Since: 16 Jul 2006
Location: South Gippsland
Posts: 511

Australia 2007 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

I just had all the pads replaced at 90,000 k's - $459.28 fitted (not including rotors) - all work done by the dealer.
 Is God willing to prevent evil, but not able? Then he is not omnipotent.
Is he able, but not willing? Then he is malevolent.
Is he both able and willing? Then whence cometh evil?
Is he neither able nor willing? Then why call him God?
(Epicurus BC 341-270) 
 
Post #39375828th Dec 2008 11:52 pm
View user's profile Send private message View poster's gallery Reply with quote
ianv
 


Member Since: 20 Dec 2007
Location: Bungendore, New South Wales
Posts: 338

Australia 2015 Discovery 4 3.0 TDV6 Base 7 Seat Auto Fuji WhiteDiscovery 4

Hi,

How come all the replacement rotors and sensors? Sensors can be re used if not damaged, they just clik in and out of the pads when you change them. Disks should only be machined if they get badly scored, warped or badly ridged. Seems a bit like over servicing. I am at 90K's now with no machining, 3 sets of front pads, 1 front sensor, 2 sets of rears 1 rear sensor (Got a stick it the back wheel that damaged the sensor wire). Disks are about 50% from new to minimum thickness.

Ask the mechanic to show you what is wrong before they do the work, I've experienced them ringing me up and telling me things are worn or broken when I know them to be ok. Just thank them and get them to quote, then take your vehicle home and check it yourself. Lots of money to be saved here. Don't get caught over a barrel with a phone call.

Happy new year all
Ianv Very Happy
 TDV6  
Post #39388229th Dec 2008 12:49 pm
View user's profile Send private message View poster's gallery Reply with quote
Zilch
 


Member Since: 24 Apr 2006
Location: Sydney
Posts: 131

Australia 

Well work was undertaken Tuesday, all round Pads, Rotors and Sensors, $1449 dollars, but when arriving to pick it up some mixed news:

They found a problem with the boost pump, which required a further 2 day stay whilst they waited for all the parts to arrive, required new master cylinder assembly (a repair kit i think) , boost and pump assemblies.. glad they found it before the warranty is up in 3 months time Wink the symptom is logged as a "Hard Brake Pedal" Shocked
 another Pommie from the darkside

MY20 Defender P400 SE
MY103 RR Sport TDv6 
 
Post #3985328th Jan 2009 8:52 am
View user's profile Send private message View poster's gallery Reply with quote
wopac5
 


Member Since: 20 May 2007
Location: Karratha
Posts: 146

Australia 2006 Discovery 3 TDV6 SE Auto Chawton WhiteDiscovery 3

Zilch...mine is going in on Monday for the same thing. I had noticed that the vacuum wasn't holding and the system would "gurgle" when restarting after a short stop, with foot on the brake. All under warranty but only 53K on the clock Exclamation

IanV...agree. Can't believe rotors need changing just because the pads are worn. That's why pads are designed to wear...
  
Post #3992469th Jan 2009 6:33 am
View user's profile Send private message View poster's gallery Reply with quote
bashir
 


Member Since: 04 Jan 2005
Location: Huon Valley, Tasmania
Posts: 154

Australia 2009 Discovery 4 3.0 TDV6 HSE Auto Stornoway GreyDiscovery 4

i recently had all rotors, pads, sensors etc replaced at the end of November.
i asked about maching the rotors as I had lips forming, but it wasn't recommended.
Ended up replacing the lot and cost me $1k even.
Had the work completed by Craig at Southern Classic Cars in Wollongong before moving to southern Tassie.
 2009 Discovery 4 3.0 TDV6 HSE

1985 LR 110 County 3.5 V8
(what options?!) 
 
Post #40135912th Jan 2009 10:56 pm
View user's profile Send private message View poster's gallery Reply with quote
norto
 


Member Since: 10 Apr 2006
Location: batemans bay
Posts: 1605

Australia 2005 Discovery 3 TDV6 S Auto Chawton WhiteDiscovery 3

My pedal is going to the floor when held down.
Ran out of the warranty on the 30/12
 Pete  
Post #40138413th Jan 2009 1:33 am
View user's profile Send private message View poster's gallery Reply with quote
bashir
 


Member Since: 04 Jan 2005
Location: Huon Valley, Tasmania
Posts: 154

Australia 2009 Discovery 4 3.0 TDV6 HSE Auto Stornoway GreyDiscovery 4

norto wrote:
Ran out of the warranty on the 30/12

rotors, pads and sensors aren't covered under warranty Wink
 2009 Discovery 4 3.0 TDV6 HSE

1985 LR 110 County 3.5 V8
(what options?!) 
 
Post #40138813th Jan 2009 2:10 am
View user's profile Send private message View poster's gallery Reply with quote
norto
 


Member Since: 10 Apr 2006
Location: batemans bay
Posts: 1605

Australia 2005 Discovery 3 TDV6 S Auto Chawton WhiteDiscovery 3

Its not the pads etc, there is an internal leak in thr system somewhere.
Might pay for everyone to check theirs before they run out of warranty.
Start the engine and put a lot of pressure on the brake pedal,
if the pedal continues to depress then there is a problem.
I think it has been posted before
 Pete  
Post #40139213th Jan 2009 3:09 am
View user's profile Send private message View poster's gallery Reply with quote
Display posts from the last:  
Post Reply Back to top
Page 1 of 2 12>
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site