wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
  
|
You would need to check your part number first
I suspect you may have part number XVJ500042 ... G4 Gone ...but not forgotten
|
 24th Mar 2015 5:39 pm |
|
|
Ian Lucas
Member Since: 24 Mar 2015
Location: Berkshire
Posts: 3
 
|
I'll have a look tomorrow afternoon
|
| 24th Mar 2015 8:28 pm |
|
|
Ian Lucas
Member Since: 24 Mar 2015
Location: Berkshire
Posts: 3
|
Yes it is XV1500042
|
| 25th Mar 2015 4:05 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
|
Sent you a message with some options G4 Gone ...but not forgotten
|
| 25th Mar 2015 4:14 pm |
|
|
airstreamer
Member Since: 03 Nov 2012
Location: Warwickshire
Posts: 40
|
Don't suppose you know about an audio software update that mine needs apparently, had it tested at an electrical auto place and they couldn't find anything wrong with the radio but said it needed the update.
|
| 26th Mar 2015 9:02 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
|
Depends what your problem is ?
And how would an independent know if you needed an update ? G4 Gone ...but not forgotten
|
| 26th Mar 2015 9:39 pm |
|
|
airstreamer
Member Since: 03 Nov 2012
Location: Warwickshire
Posts: 40
|
Hi sorry for the delay in replying....
We've been having the radio and sat nav shutting down intermittently problem. The auto electrical place tested the radio in situ and have given us details using Dec superscan 3 software. Trouble code u0184 lost communication with audio unit, bus signal message failure- missing a message.
We have 4 sheets of print out , they said the only thing that seemed to be needed was a software update that they can't do,
If you can advise best next course of action or suggest someone who might know that would be great. Have wondered about the guy in Bath at Maple audio? where you send radio off to them.
Thanks for any suggestions.
|
| 6th Apr 2015 9:17 am |
|
|
benhyman
Member Since: 10 May 2015
Location: M20 2PY
Posts: 5
|
Hi
I have a MY2011 D4, will this bluetooth upgrade all me to stream music from an iPhone, like possible in gen2.1 systems?
|
| 23rd May 2015 5:03 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
|
Afraid not.. There is no software in the car to control it G4 Gone ...but not forgotten
|
| 23rd May 2015 5:59 pm |
|
|
BC
Member Since: 28 Jul 2015
Location: London
Posts: 4
 
|
Wiggs...New here - seen your posts on Bluetooth retrofit to and I'm interested in doing it to a a 05 plate UK Disco 3 HSE...
Have voice control, so think I need:
Steering controls
Module - preferably a D4 one
MOST cable
Power
Is this right?
Also can you recommend how to get a D4 module?
Cheers,
BC
|
| 31st Jul 2015 12:20 pm |
|
|
cockney
Member Since: 01 Jan 2016
Location: northampton
Posts: 1
 
|
Will your replacement Bluetooth units work with a galaxy s6 edge allowing phone book to be shown please let me no
|
| 2nd Jan 2016 9:51 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
|
BC wrote:Wiggs...New here - seen your posts on Bluetooth retrofit to and I'm interested in doing it to a a 05 plate UK Disco 3 HSE...
Have voice control, so think I need:
Steering controls
Module - preferably a D4 one
MOST cable
Power
Is this right?
Also can you recommend how to get a D4 module?
Cheers,
BC
Yes .. Correct .
It will also need enabling once fitted
I can supply the parts needed G4 Gone ...but not forgotten
|
| 3rd Jan 2016 9:51 am |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
|
cockney wrote:Will your replacement Bluetooth units work with a galaxy s6 edge allowing phone book to be shown please let me no
Yes  G4 Gone ...but not forgotten
|
| 3rd Jan 2016 9:51 am |
|
|
Ru78
Member Since: 16 Mar 2016
Location: East Sussex
Posts: 19
|
Another happy customer, thanks Wiggs!
Order placed and replacement box arrived 3 days later.
Simple job, 10 minutes with the correct tools, a flat head screw driver to pry a bolt cover (the one above the seat belt bottom fixing), a cross head for the bolt and a ratchet to take the seat belt base off. I didn't have to remove any other screws.
I just pulled the trim panel off at the front edge so i could access the unit, used a torx screw driver to undo the one bolt, undid the 2 fixings as directed. then reversed the procedure to fit the the replacement!
Old unit on its way back to Wiggs (sorry forgot to put my name inside the envelope, but its on the back of it)!
Very easy, and all up and running.
Thanks again,
Ru
|
| 14th Apr 2016 4:20 pm |
|
|
SumpNut
Member Since: 08 Feb 2016
Location: Derby
Posts: 35
|
Another happy customer here - brilliant service and communication from Wiggs, the new module works perfectly and my deposit came back very quickly.
Thanks again
Regards
Daniel
|
| 14th Apr 2016 8:01 pm |
|
|
