Member Since: 05 Dec 2012
Location: Budapest
Posts: 11
HELP
I also froze the screen and the message is HLDF bootloader. Anyone can send me the link to the ISO address haty@freemail.hu
Wiggs, if you have not tired of that harassment............
28th Aug 2013 5:12 pm
Menezes
Member Since: 07 Sep 2013
Location: Portugal
Posts: 1
wiggs hi
i have a RRS autobiography 2009 (us) and a few days ago its stuck in range rover logo, no errors with proper diagnostic, i have already update the ACM unit, still the same my only hope is the nav cd.
Best regards
7th Sep 2013 9:59 am
pirecrompir
Member Since: 12 May 2008
Location: Slovenia
Posts: 7
Hi, I am from Slovenia and my 2005 Disco3 has had this problem since about a week. Is there a way I could get the link to the solution? I know Wiggs has to be really bored by now with all of us asking the same thing ...
Thank you very much in advance and sorry for cross posting, I wasn't sure, which thread was the right one.
Member Since: 11 Sep 2013
Location: Annecy
Posts: 3
Hello,
Could you send me a PM also Wiggs, for the DVD (thought i m owner of a RangeRover Vogue , i hope it works also with it.
Thanks in advance.
Mickael
11th Sep 2013 7:12 pm
Mick74A
Member Since: 11 Sep 2013
Location: Annecy
Posts: 3
Hello,
Could you send me a PM also Wiggs, for the DVD (thought i m owner of a RangeRover Vogue , i hope it works also with it.
Thanks in advance.
Mickael
Edit: sorry for double post.
11th Sep 2013 7:14 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
Menezes wrote:
wiggs hi
i have a RRS autobiography 2009 (us) and a few days ago its stuck in range rover logo, no errors with proper diagnostic, i have already update the ACM unit, still the same my only hope is the nav cd.
Best regards
If its not showing the can boot loader message then it won't work .. Must be another issueG4 Gone ...but not forgotten
11th Sep 2013 10:37 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
All others on this page have pm'sG4 Gone ...but not forgotten
11th Sep 2013 10:38 pm
Mick74A
Member Since: 11 Sep 2013
Location: Annecy
Posts: 3
Thanks a lot Wiggs !
See you
12th Sep 2013 11:47 am
Brooksy999
Member Since: 03 Sep 2013
Location: Basingstoke
Posts: 1
Hi Wiggs, I have had the file sent by the large one,
But i don't think the mrs is downloading it right.
Could you send your one to me also
brooksy999@hotmail.com
Cheers.
12th Sep 2013 12:32 pm
pirecrompir
Member Since: 12 May 2008
Location: Slovenia
Posts: 7
wiggs wrote:
All others on this page have pm's
thanks a lot!
cheers
1st Oct 2013 8:14 am
pirecrompir
Member Since: 12 May 2008
Location: Slovenia
Posts: 7
i know wiggs recommends to go through the process with a battery charger connected, but i don't have access to one. has anyone done it without one? is it safe or not?
thanks!
1st Oct 2013 6:21 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
The D3 pulls a lot of amps so best to have it hooked-up to a power source.
Jump leads to another car would be fine if you do not have a charger.
Land Rover - Turning Drivers into Mechanics Since 1948
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
...
