|
|
chalky
Member Since: 21 Aug 2008
Location: Yorkshire
Posts: 3145
  
|
Mark,
I can see that you have registered interest, thanks.
Yes please if you could ring Pete on Monday and pay then he will let me know you have paid I can then tick the box then all you have to do is wait then communicate with Pete via email.
Thanks again to all who have shown tremendous interest this product. Only dead fish go with the Flow !
|
 23rd Jun 2012 5:15 pm |
|
|
discohugh
Member Since: 10 Jan 2012
Location: warwickshire
Posts: 101
 
|
Hi chalky I would like to partake in the group buy for a Bell remap, but just logged on and going on hols early tomorrow. Is there a time limit or maximum number available ? Could I sort this out in ten days time ? Should I contact Pete direct ? Many thanks Hugh Discovery 3 HSE 55 plate Buckingham Blue with Alpacha
Discovery 300 TDI auto, one of the last, now gone
Freelander 2 gs manual, from new, now gone
Defender td5 full county pack, from new lovely lovely, now gone
Defender 110 12 seater 300tdi no heater, good prep for antarctic, now gone
various old farm landies, what a way to learn to drive !!!
|
| 23rd Jun 2012 5:46 pm |
|
|
chalky
Member Since: 21 Aug 2008
Location: Yorkshire
Posts: 3145
|
Hugh, I think if you tick the box to register interest and them PM Pete to advise of any delay, I'm not sure on total numbers ?
Pete may cut this off at 15 units ? I'm not sure.
If you register your interest and pay upon your return then I think that will work just fine.
Pete will no doubt read this and advise on numbers and timescales etc  Only dead fish go with the Flow !
|
| 23rd Jun 2012 5:54 pm |
|
|
schnauzer
Member Since: 09 Aug 2011
Location: top of the mendips
Posts: 13
|
chalky Hi I have registered an interest but am not sure what to do next? many thanks Paul Life is what you make it. Always has been. Always will be.
|
| 23rd Jun 2012 7:59 pm |
|
|
chalky
Member Since: 21 Aug 2008
Location: Yorkshire
Posts: 3145
|
Hello mate, i have sent you a PM
It's the same one that every one else got.
Let me know if you have any problems. Only dead fish go with the Flow !
|
| 23rd Jun 2012 10:01 pm |
|
|
zambalek80
Member Since: 16 Apr 2012
Location: Up on the hill in Basel
Posts: 18
|
Alright. Been thinking about it all weekend. I'm in! No. 14, I reckon.
Btw: thanx chalky for that great offer.
Cheers.
|
| 24th Jun 2012 5:27 pm |
|
|
chalky
Member Since: 21 Aug 2008
Location: Yorkshire
Posts: 3145
|
Thanks Zambalek, I will PM all concerned so far,
Just spoke to Pete,
There is a cut off so if you are pondering over the commit button this might spur you on !
X4 Left !
Thanks to all those who have committed so far
I,m off to pick mine up this afternoon................ Only dead fish go with the Flow !
|
| 25th Jun 2012 9:59 am |
|
|
race.it
Member Since: 15 Oct 2011
Location: Hopefully at a race track.
Posts: 851
|
Does this need the tool that pete supplies to update the map, or can the map be updated using a msv2?
just wondering
|
| 25th Jun 2012 10:04 am |
|
|
chalky
Member Since: 21 Aug 2008
Location: Yorkshire
Posts: 3145
|
not sure to be perfectly honest ?
Thats a definate question for Pete to answer as he will know the answer for sure, it certainly does include the Interface for applying and removing the map but from what i presume you are asking is if you can load it on to MSV2 instead of carrying round the little black box ?
Ib suppose having MSV2 kind of renders the Interface useless ?
I will let you know
Good question ! Only dead fish go with the Flow !
|
| 25th Jun 2012 10:10 am |
|
|
cornishboy
Member Since: 09 Oct 2008
Location: Bristol
Posts: 649
 
|
Just a quick question!!!
It sounds like you need a windows laptop to run this? Is this true (only have a mac - other fruit based laptops are available).
Also do you have to have your EGR's blanked off for this to be effective.
Thanks in advance?
|
| 25th Jun 2012 10:56 am |
|
|
sean 471
Member Since: 26 Apr 2011
Location: Sheffield
Posts: 2990
|
Picked mine up from Pete this morning. Has Flack said, its improved the drivability a great deal. Lot cleaner and stronger pulling away. Came back the same route and MPG slightly better. Well worth it.
|
| 25th Jun 2012 11:56 am |
|
|
bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
|
race.it wrote:Does this need the tool that pete supplies to update the map, or can the map be updated using a msv2?
just wondering
Hi
Ther bas remap interface only loads the tuned and original files, it does not have the function to make software updates to the car like the MSV2 or dealer tools do. It can only work with whats in the ecu now.
If you want to make software updates to the car this is best done before tuning is set up on the interface.
Pete
|
| 25th Jun 2012 1:32 pm |
|
|
bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
|
cornishboy wrote:Just a quick question!!!
It sounds like you need a windows laptop to run this? Is this true (only have a mac - other fruit based laptops are available).
Also do you have to have your EGR's blanked off for this to be effective.
Thanks in advance?
Hi
You can run bootcamp on a MAC or a simlar virtual Windows program with my software.
Pete
|
| 25th Jun 2012 1:32 pm |
|
|
bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
|
discohugh wrote:Hi chalky I would like to partake in the group buy for a Bell remap, but just logged on and going on hols early tomorrow. Is there a time limit or maximum number available ? Could I sort this out in ten days time ? Should I contact Pete direct ? Many thanks Hugh
Hi
If you join up with the Gbuy ill stand on and settle the transaction when you get back from your holiday.
Pete
|
| 25th Jun 2012 1:33 pm |
|
|
bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
|
Thank you all for your interest and payments so far. Paid for units are being sent out as payments are received, all are sent with UPS.
I have advised Chalky that i will honor this Gbuy untill 20 units. I will leave it to run untill 20 are sold or until Billing Landrover show in 4/5 weeks which ever comes first.
Pete
|
| 25th Jun 2012 1:36 pm |
|
|
