Difference between revisions of "FBH Diagnostic Loom"

Revision as of 12:05, 16 October 2017

Thank you for buying an FBH diagnostic loom!

NOTE: pending an update on the above PDF, diagnostic looms are now supplied with additional pins on yellow and white wires to connect to the vehicle's 8 pin plug. These are NOT USED on any pre-2012 Model Year car. On 2012MY onwards D4 and Range Rover Sport, connect yellow to pin 4 and white to pin 7. This will allow the FBH to be started with the Thermo Test software. The CAN connections are not needed if only carrying out fault reading/clearing or individual component testing.

If you have 2012MY onwards vehicle and a diagnostic loom without the yellow and white CAN wires coming out of the 8 pin connector you can request a free upgrade kit. Please [send us an email]

For the L322 Range Rover, the inner wheel arch liner has to be removed to access the FBH. The pin on the blue wire (fuel dosing pump) should be inserted into pin 6 on the vehicle's 6 pin plug and not 5 as in the above PDF.

Revision as of 11:52, 16 October 2017 (view source) Martin (talk \| contribs) ← Older edit		Revision as of 12:05, 16 October 2017 (view source) Martin (talk \| contribs) Newer edit →
Line 9:		Line 9:
	* If you have 2012MY onwards vehicle and a diagnostic loom without the yellow and white CAN wires coming out of the 8 pin connector you can request a free upgrade kit. Please [[mailto:shop@fnltd.co.uk?subject=FBH%20Diagnostic%20Loom%20CAN%20Upgrade send us an email]]		* If you have 2012MY onwards vehicle and a diagnostic loom without the yellow and white CAN wires coming out of the 8 pin connector you can request a free upgrade kit. Please [[mailto:shop@fnltd.co.uk?subject=FBH%20Diagnostic%20Loom%20CAN%20Upgrade send us an email]]

−	* For the L322 Range Rover, the inner wheel arch liner has to be removed to access the FBH. The pin on the blue wire (fuel dosing pump) should be inserted into pin 6 on the vehicle's 6 pin plug and not	+	* For the L322 Range Rover, the inner wheel arch liner has to be removed to access the FBH. The pin on the blue wire (fuel dosing pump) should be inserted into pin 6 on the vehicle's 6 pin plug and not 5 as in the above PDF.