cmb2020
Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150
Disco 3 SE Manual 2005 V6 2.7
Buckley, North Wales
27th Mar 2021 4:18 pm
cmb2020
Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150
Disco 3 SE Manual 2005 V6 2.7
Buckley, North Wales
27th Mar 2021 4:19 pm
ronald.soak
Member Since: 29 Apr 2008
Location: London
Posts: 516
Great
Though did detect that you seem to have sent the same photo for before and after
Seriously looks well set up.
Water pump replacement should be a doddle now then just the nightmare of refitting the starter motor and cables.
John
27th Mar 2021 5:14 pm
cmb2020
Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150
2 rotations clockwise and the belt is towards the back a bit of the wheels
Top cam pin holes aligned perfectly and crank aligned perfect
Giving up for today but starter back on bolts hand tight. Should be done in another 3 hours work.
Thanks again Disco 3 SE Manual 2005 V6 2.7
Buckley, North Wales
27th Mar 2021 6:23 pm
aja4x4
Member Since: 14 Apr 2019
Location: Westbury
Posts: 2459
Well done Andrew
D3 2.7tdv6 2005
D4 3.0 SDV6 Commercial died and gone to LR heaven
D5 3.0 SDV6 HSE
27th Mar 2021 8:30 pm
cmb2020
Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150
How important are the rubber hoses on the sm? Disco 3 SE Manual 2005 V6 2.7
Buckley, North Wales
28th Mar 2021 12:47 pm
aja4x4
Member Since: 14 Apr 2019
Location: Westbury
Posts: 2459
Not that important they are for wading through deep water Andrew
D3 2.7tdv6 2005
D4 3.0 SDV6 Commercial died and gone to LR heaven
D5 3.0 SDV6 HSE
28th Mar 2021 12:52 pm
cmb2020
Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150
Ok cheers I won’t be doing that Disco 3 SE Manual 2005 V6 2.7
Buckley, North Wales
28th Mar 2021 12:53 pm
cmb2020
Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150
Where’s this go?
Disco 3 SE Manual 2005 V6 2.7
Buckley, North Wales
28th Mar 2021 1:24 pm
aja4x4
Member Since: 14 Apr 2019
Location: Westbury
Posts: 2459
It goes on the front of the engine once the timing cover is back on near the top slightly to the left of centre when looking from the front. Andrew
D3 2.7tdv6 2005
D4 3.0 SDV6 Commercial died and gone to LR heaven
D5 3.0 SDV6 HSE
28th Mar 2021 1:29 pm
cmb2020
Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150
How do I get the alternator cable on? Can’t seem to reach
Do I do alternator then the sm after maybe? Disco 3 SE Manual 2005 V6 2.7
Buckley, North Wales
28th Mar 2021 2:44 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10367
I think I would do the alternator first.
28th Mar 2021 2:45 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10367
Thouigh if you have the starter connected already, there must be a way for it to reach
28th Mar 2021 2:46 pm
cmb2020
Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150
Anyone know where this lives?
Shorter version of ones under pump
Disco 3 SE Manual 2005 V6 2.7
Buckley, North Wales
28th Mar 2021 3:57 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10367
I think that holds the
Plastic air intake to the Y
Bolts to that metal bracket you posted earlier
28th Mar 2021 3:59 pm