Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20841
Another pile sent out today
Just realised, I may have (did) forgot to include a little slip that Martin asked me to include with the 4 pin connector
Red wire is permanent +12v
Black wire goes to Earth/0v
Orange wire goes to the red wire on the FBH
Blue wire can be taped up and left, or wired into an LED, to show when the FBH is active via the timer
The remaining ones who have supplied an address shall be posted tomorrow
Graham + Mark, have you 2 sorted something out as yet?My D3 Build Thread
Member Since: 17 Oct 2013
Location: Cheshire
Posts: 84
Disco_Mikey wrote:
Another pile sent out today
Just realised, I may have (did) forgot to include a little slip that Martin asked me to include with the 4 pin connector
Red wire is permanent +12v
Black wire goes to Earth/0v
Orange wire goes to the red wire on the FBH
Blue wire can be taped up and left, or wired into an LED, to show when the FBH is active via the timer
The remaining ones who have supplied an address shall be posted tomorrow
Graham + Mark, have you 2 sorted something out as yet?
Graham has paid so will arrange with you to collect etc
Sorry to have messed you about
Kind regards
Marc
5th Dec 2013 9:45 pm
Tufty
Member Since: 13 Jul 2010
Location: UK
Posts: 481
Re: Question
Tufty wrote:
Reading through the seemingly mountains of threads on the FBH I can't seem to find an answer to a question I have.
If you turn it on via a remote via the timer, I assume the disco turns it back off when you unlock it via WBus as it wakes up. Does it have any issues firing back up when hot when you start the engine?
Cheers
Anyone???
5th Dec 2013 10:20 pm
G_Cam
Member Since: 12 Aug 2010
Location: Fife
Posts: 2061
Disco_Mikey wrote:
Another pile sent out today
Graham + Mark, have you 2 sorted something out as yet?
Hopefully Marc has now got the payment.. Sent over earlier..
PM's sent
Thanks Both..
Graham1 TR6 Rusting away quietly
1 FARR UTV SOLD
1 International Harvester SOLD
7 x D3 all SOLD
2 x D4 both SOLD
1 x Mrs D4 'Panther' SOLD
1 x Outlander van SOLD
1 continual stream of car parts and me living in the garage...
5th Dec 2013 11:25 pm
paulmeryan
Member Since: 15 Aug 2011
Location: Glasgow
Posts: 742
Mine arrived yesterday. Thanks very much for arranging this Mikey.
FYI the Advent Controls GSM remotes as recommended by another member on another FBH thread are back in stock from Mon 9th and the company tells me this version will have some surge protection too. Here's a link
soldered the wires on and wired it into my GSM unit so I can ring my car to pre heat again , really missed that in the morning for the last few weeks.
Also added a second option to trigger the timer by looping in a remote fob unit so when in bad signal areas or indeed at our house in France I can still run the FBH
IID Pro MV License - D3, D4 & RRS - Enabling, Updates, D4 & RRS Timed / Remote Climate, D4 Bluetooth fitting
PM me for details
Owner of the original "Beanie" grille
D4 & RRS style D3 grilles made to order
7th Dec 2013 7:08 pm
ids
Member Since: 12 May 2009
Location: Herefordshire
Posts: 384
Cheers Mikey
Received mine today as well. Thanks for organising the Group Buy
Ids
7th Dec 2013 7:32 pm
Farsco
Member Since: 07 Sep 2013
Location: Douglas
Posts: 352
beanie wrote:
soldered the wires on and wired it into my GSM unit so I can ring my car to pre heat again , really missed that in the morning for the last few weeks.
Also added a second option to trigger the timer by looping in a remote fob unit so when in bad signal areas or indeed at our house in France I can still run the FBH
Mikey for organising, I know how hard GB's can be to manage
Took me ages to solder the wires on today. Not sure it will work yet but tomorrow will tell. One went on no issue, the other took ages. Couldn't get the solder to stick and stay on the contact.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum